The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: Sango on October 16, 2018, 07:16:54 PM
-
My favorite local LGS for all things CZ was running a special on P09 duty?s for $399. I got off early from work, and found myself there. Big mistake. ;D O0
I looked at a P10c, which I plan to eventually add as well, but the P09 was just so smooth, and with the discounted price, I couldn?t resist. I also love decocker models, so that was all she wrote. This is CZ #10 for me. They should set up an addict hotline.
(https://preview.ibb.co/mYDYy0/709-C825-C-E74-C-4-BEF-B764-737296-B52-BE5.jpg) (https://ibb.co/hKbmJ0)
(https://preview.ibb.co/j34HQf/75456786-AB95-4-FC2-87-D4-5-E4-F052-A2511.jpg) (https://ibb.co/bTpTWL)
(https://preview.ibb.co/gsU6J0/FF64391-B-7-EEA-4339-857-A-693-CCBD35-E27.jpg) (https://ibb.co/j5OBkf)
(https://preview.ibb.co/kzYBkf/7-ABE2-E86-CD75-4-A2-B-9-F40-9-F563-CF0-B58-B.jpg) (https://ibb.co/cHaP5f)
(https://preview.ibb.co/g89Oy0/3-F5812-DB-B1-BF-4-EBE-8926-B9-EC34-D4-CE03.jpg) (https://ibb.co/mXEqd0)
(https://preview.ibb.co/kcou5f/198448-FA-E294-4534-BFA7-1845811-B23-D3.jpg) (https://ibb.co/dvZqd0)
(https://preview.ibb.co/nddu5f/529924-CD-8-FC1-431-D-92-A9-7-EB428-C4-BEF2.jpg) (https://ibb.co/kxKOy0)
(https://preview.ibb.co/eag3y0/8-A6784-AE-E987-48-F3-B48-C-0596-A06307-F4.jpg) (https://ibb.co/dKF7Qf)
(https://preview.ibb.co/m9hnQf/8234-FCBF-692-D-4-E9-E-8960-E4-D8502-A49-A1.jpg) (https://ibb.co/ct8SQf)
(https://preview.ibb.co/nOwxQf/78-F5-A9-CB-BE55-4-E6-B-8-DB3-62-F68780-C450.jpg) (https://ibb.co/kguj5f)
(https://preview.ibb.co/eYocQf/7-B42-F390-012-F-4-F78-9-B5-C-0537-C051-B0-BB.jpg) (https://ibb.co/jnQP5f)
-
Plans are:
LOADS of rounds down the pipe, some +2 mags for it, Talons, and voila! New bedside pistol.
-
Very nice.
-
Thanks, Viking!!! At $399, had to do it. ;D
-
Like you, I got a P07 first. That lead to a P09 which lead to another P09.
-
No duty. Congratulations.
How is the DA pull? Smooth and even? Grit? Stacking?
-
Congrats. I did the opposite and started with the big brother P09 then got the P07. :D. I highly recommend the CGW short reset kit and associated hammer spring. Loved it so much that I ordered one for the P07 too. It's supposed to show up tomorrow.
(http://i63.tinypic.com/betqh5.jpg)
-
Congrats, great purchase for a steal!
-
Thanks fellas!!! Really impressed with it so far, taking it out to run it tomorrow.
M1A4ME: Nice!!
Brian, the DA pull is smooth and even, and nice and heavy. I?d guess around 10-11lb? Single action is effortless, smooth. I?d guess in the 4-5lb range. The slide is the easiest to rack of any of my CZ?s, safely.
Arndog, gorgeous collection! Love them all! I?ll definitely check that out.
Cyanide: thank you sir!
I actually decided to mix it up and try the grip tape from Springer Precision and also got some Red hard anodized Base Plates while I was on the site. $10 for the grip and $18 each for the base plates, can?t beat that! Should look exactly like this once they arrive.
https://www.flickr.com/photos/zero7one-photo/19200941151
This rig is extremely light for its size. I?m sure I?ll get loads of enjoyment and satisfaction out of it.
-
On a scale of 1-10, how hard are these kits to install?
Sent from my SM-G950U1 using Tapatalk
-
Congrats. I did the opposite and started with the big brother P09 then got the P07. :D. I highly recommend the CGW short reset kit and associated hammer spring. Loved it so much that I ordered one for the P07 too. It's supposed to show up tomorrow.
(http://i63.tinypic.com/betqh5.jpg)
On a scale of 1-10, how hard are these kits to install?
Sent from my SM-G950U1 using Tapatalk
-
On a scale of 1-10, how hard are these kits to install?
Sent from my SM-G950U1 using Tapatalk
Interested in this as well. Is this a good DIY project or something better suited for a smith?
-
It wasn't too difficult. Watched a YouTube video for reference and had it done in under half an hour. I'll see if I can find the video I used this afternoon since my kit is supposed to show up today.
-
I used this video,
https://www.youtube.com/watch?v=ChRsfL_xyHs
The following video should be helpful for the slide work and it's the same guy above,
https://www.youtube.com/watch?v=9VhXSYKxcaA
-
The hardest part is re-installing the decocker spring. Having a tool is the only way I know how - there is a thread with a tool on this site, or you can file a notch in a jeweler's flat head screwdriver. Even then it took me 40 minutes once to do lock the end in position. Other than that it is pretty easy. Change the trigger return spring while you are at it.
-
I hate the trigger on my P-09.
-
My worst P0X trigger was, without a doubt, the .40 S&W P09.
Still better than either of my steel framed P01 looking CZ75 Compacts, my Pre B CZ85, my first CZ75 Compact, well, I could keep typing but the only CZ I bought with a better trigger than the P0X guns is my .40 S&W Tactical Sport and it's so light/short/crisp/sweet it's just scary if your don't dry fire it some first to get used to it.
I've put some money/time in parts/polishing on a couple/three of my metal framed CZ's and they are better than the P0X guns now.
I guess I got lucky.
-
Just got back from the range, and the P09 is certainly impressive. I shot it as good or better than any of CZ I own, minus the Shadow 2. I absolutely love this gun, especially for sub-$400. Incredible. Makes me wonder how I went this long without adding one to the stable. I also shot my P07 Tactical better today than I have in the past few range trips, the polymer CZ?s really shined today.
Good times. All in all, sent probably north of 550 rounds down range today, a mix of 115gr and 124gr (only 124gr thru Shadow 2?s, everything else ate a mix of both)
The reset on the P09 is certainly the longest of any CZ I own. That will have to be remedied. Outside of that, it?s as good as any CZ in my opinion, S2 excluded (S2 is like cheating, it?s effortless)
-
(https://preview.ibb.co/bUF0Ff/9-EF8-EF36-CB1-B-48-BB-B7-BF-8-DA28-ED8-EB69.jpg) (https://ibb.co/gzKhT0)
(https://preview.ibb.co/nd3nvf/4-EE8-A8-DD-BC24-4-DB3-86-B8-5475-D3666220.jpg) (https://ibb.co/k5SEaf)
The .45 and the Scorpion were the only two CZ?s that didn?t make the trip today. Next week, the 97 and FN 5.7 will replace the two polished beauties for range fun, and the Sig and 44 magnum Revolver will come along as well, just to make sure everyone on other lanes are awake. O0
-
Congrats! I?m going to add a P09 also for 3gun next year. It?s insane value for the money. I see some killer deals starting up on these now. Oh and I would definitely recommend Cajunizing that puppy!
Sent from my iPhone using Tapatalk
-
Congrats! I?m going to add a P09 also for 3gun next year. It?s insane value for the money. I see some killer deals starting up on these now. Oh and I would definitely recommend Cajunizing that puppy!
Sent from my iPhone using Tapatalk
Thanks, Mercs!! Yes it is quite a weapon for the price, fantastic value. Loved your new Shoes on the SS P01! Yep it?s definitely going to get some CGW love
-
They are indeed great pistols for the money - or better, just great pistols.
Reset is all over the map. I have a stock P09 (only spring changes) and it has a shorter reset than one of my P07s with SR Kit. It depends on the parts combination. These are production guns.
Sounds like you got a good trigger - great!
I still find the P07 easier to draw onto target from concealment, but these are still great.
While barrel to slide fit is excellent, they are not as tight as say a SIG - I think the accuracy comes from the superior dwell time. Pull your slide back and see how much travel you get before the barrel hood drops. Amazing. This also helps reduce felt recoil.
-
Brian,
Well put. I agree!
Awaiting Greg Cote to get some 21?s back in stock, and eyeing some goodies from CGW
-
Congrats! Love my P-09!
-
Congrats! Love my P-09!
Thanks, SW!!! I love the P09 too, it?s fantastic.
Mail day from Springer Precision, threw on some goodies after work today.
(https://preview.ibb.co/gK8gaf/691-BE670-F15-F-4-F65-80-CD-CADD7-F305-D17.jpg) (https://ibb.co/naU9T0)
(https://preview.ibb.co/n9RCgL/CDF9-DEE6-18-B7-4628-9410-8-A390-EDF74-ED.jpg) (https://ibb.co/mcrdML)
(https://preview.ibb.co/bJa51L/CC72845-A-47-C3-4-AC3-8-CA8-C2-D209176-C2-E.jpg) (https://ibb.co/bQJ3o0)
(https://preview.ibb.co/dbHJML/B6-C02-E82-40-A2-4-B5-D-AB32-379-AA95-AAD87.jpg) (https://ibb.co/k4p9T0)
(https://preview.ibb.co/mnRsFf/85-AE7552-91-E4-4483-968-C-FF7-D972-F4-E4-D.jpg) (https://ibb.co/mfiuT0)
(https://preview.ibb.co/bEtsgL/3-C179747-6-E5-B-4-CD8-AF1-B-64-AC6-BCF0-D1-F.jpg) (https://ibb.co/jgQio0)
(https://preview.ibb.co/it7XFf/7-A1-CDDBC-98-CE-4220-84-E3-BB05152-DDB95.jpg) (https://ibb.co/emDiML)
(https://preview.ibb.co/g1cXFf/D9-FAA9-E3-2-F91-4164-A41-B-2928-EF079-BB3.jpg) (https://ibb.co/nvZq1L)
(https://preview.ibb.co/hMsM80/C4-CF011-C-41-B4-4-D30-9388-C89566-A4-F78-B.jpg) (https://ibb.co/goHoo0)
(https://carinsuranceguru.org/how-to-insure-a-car-with-a-salvage-title-in-texas)
-
(https://preview.ibb.co/n4Tdo0/08548622-7696-48-E9-99-CB-96684-BF66-A2-E.jpg) (https://ibb.co/mRtpvf)
(https://preview.ibb.co/frjUvf/3-B133198-229-D-42-D0-96-FD-075-BE88-B3-D5-A.jpg) (https://ibb.co/gOL2Ff)
(https://preview.ibb.co/m4ar80/FA66-C568-9470-4-D62-9-A38-0860-C1355-D70.jpg) (https://ibb.co/kmQDML)
(https://movieplotholes.com/the-dark-knight)
-
(https://preview.ibb.co/nu19D0/5720-CE00-67-B3-43-D8-9-ED1-D82426424-D9-E.jpg) (https://ibb.co/dH3d6L)
(https://aluminumsulfate.net/ammonium-sulfate)
(https://preview.ibb.co/kpi9ff/0-F4-B53-C7-56-D3-43-E5-914-D-9-CC7-C157-A5-E7.jpg) (https://ibb.co/ma1vLf)
Never been a big polymer guy... til now. Love the P07/P09