The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: jsnwwd on October 27, 2018, 10:53:21 AM
-
1. will a set of stock p07 gen 2 sights fit on my slide
2. will a p07 gen 2 slide fit on my fame
3. what magazines can i use, p09,p10c?
4. what kind of trigger pull weight do you get with the cgw kit
5. can you do a "10 cent trigger job" like a glock with some polish and time
lastly as a new cz owner anything you feel is relevant for me to know, fill me in
(https://uploads.tapatalk-cdn.com/20181027/e732bcc8b7c2a086f0b22cf0375bb287.jpg)
-
1) Yest but may need a little help.
2) Should - why? RMR? I'd have yours milled add serrations and get it refinished.
3) P07 and P10C mags are GTG.
4) Depends what kit springs and pull you want. Defense or gaming? Call CGW and get squared away.
5) Yes and look at the stickies for help. IF your DA is smooth, it is likely GTG already. Cajun has parts galore, but the biggest problem in grittiness is the rear of the trigger bar and the roller bearing from my experience.
That is a NICE looking gen 1.
-
ty sir, and ty for the reply
1) Yest but may need a little help.
2) Should - why? RMR? I'd have yours milled add serrations and get it refinished.
3) P07 and P10C mags are GTG.
4) Depends what kit springs and pull you want. Defense or gaming? Call CGW and get squared away.
5) Yes and look at the stickies for help. IF your DA is smooth, it is likely GTG already. Cajun has parts galore, but the biggest problem in grittiness is the rear of the trigger bar and the roller bearing from my experience.
That is a NICE looking gen 1.
Sent from my SM-G955U using Tapatalk