The Original CZ Forum

CZ PISTOL CLUBS => Compact CZ 75s => Topic started by: tjwolf on February 01, 2019, 02:47:34 PM

Title: P01 decocker reset
Post by: tjwolf on February 01, 2019, 02:47:34 PM

Need help, I installed new cgw reduce power reduce trigger spring and floating trigger pin. Now it will not reset.  It looks like trigger bar is high close to frame rail. I  Watch many u- tube videos on how to install trigger spring and floating trigger pin.  Don't know what I did wrong but need help please. Thanks

Sent from my SM-T813 using Tapatalk

Title: Re: P01 decocker reset
Post by: anonymouscuban on February 01, 2019, 03:00:31 PM

Are you sure the trigger return spring is seated correctly?

I always have a really difficult time getting that little booger back in correctly. If it's not, it won't have any tension and the trigger won't reset.

Whatever it is, don't stress. Its reversible. Just reassembly issue.

Sent from my SM-G930F using Tapatalk

Title: Re: P01 decocker reset
Post by: tjwolf on February 02, 2019, 08:30:30 AM

Quote from: anonymouscuban on February 01, 2019, 03:00:31 PM

Are you sure the trigger return spring is seated correctly?

I always have a really difficult time getting that little booger back in correctly. If it's not, it won't have any tension and the trigger won't reset.

Whatever it is, don't stress. Its reversible. Just reassembly issue.

Sent from my SM-G930F using Tapatalk

Thanks for the reply,  yes did not have it in right.


Sent from my SM-T813 using Tapatalk

Title: Re: P01 decocker reset
Post by: BCC on February 02, 2019, 08:44:24 AM

Getting ready to install this....any tips for install ???? Also watched several youtubes...seems pretty straight forward---but in HD everything looks easy enough ??

Title: Re: P01 decocker reset
Post by: anonymouscuban on February 02, 2019, 09:34:40 AM

Quote from: BCC on February 02, 2019, 08:44:24 AM

Getting ready to install this....any tips for install ???? Also watched several youtubes...seems pretty straight forward---but in HD everything looks easy enough ??

No. It's pretty straightforward. The biggest thing to remember is to make it a habit of removing all the pins from right to left. This is especially important with the decocker pin. If you push it out of the right side, it will widen the hole in the frame and the pin will no longer stay in place. You will need to have the frame staked.

So just remember, push pins out of the left side.

Sent from my SM-G930F using Tapatalk