The Original CZ Forum

GENERAL => General Firearms Discussion => Topic started by: photog22740 on February 23, 2019, 02:55:15 PM

Title: Bren Ten
Post by: photog22740 on February 23, 2019, 02:55:15 PM
Curious if there?s ever been talk about CZ producing their 75 B in 10mm?  Seems like they would given the resurgence of 10mm and the fact that the Bren Ten was basically a CZ design.
Title: Re: Bren Ten
Post by: DenStinett on February 23, 2019, 03:01:51 PM
Actually, it would be on the 97 Platform
There has been "some" movement but not sure just how far THAT has gone
https://czfirearms.us/index.php?topic=54272.msg338813#msg338813
BUT, get in line
It starts behind me   8)
Title: Re: Bren Ten
Post by: photog22740 on February 23, 2019, 04:43:17 PM
Actually, it would be on the 97 Platform
There has been "some" movement but not sure just how far THAT has gone
https://czfirearms.us/index.php?topic=54272.msg338813#msg338813
BUT, get in line
It starts behind me   8)

LOL, ok!
Title: Re: Bren Ten
Post by: M1A4ME on February 23, 2019, 05:52:01 PM
Is the Tac. Sport frame not "deep" enough front to back for 10MM?   Wouldn't be as much recoil in 3 lb. plus pistol.
Title: Re: Bren Ten
Post by: DenStinett on February 23, 2019, 10:46:17 PM
Is the Tac. Sport frame not "deep" enough front to back for 10MM?   Wouldn't be as much recoil in 3 lb. plus pistol.
Maybe so
According to Angus, the TS is a "Large Frame"  (  https://czfirearms.us/index.php?topic=13822.msg41125#msg41125  )
They do use a different Mag then your basic 75 too
The TS would make a great Frame for a Longslide in 10mm
Title: Re: Bren Ten
Post by: motorcyclist on February 24, 2019, 12:43:10 AM
I'd love to see a 10mm CZ, but I'm old and probably won't live long enough to see that happen. If I get real serious about that caliber I won't hesitate to buy a Tanfoglio. The stock 3 I bought is running very nicely.
Title: Re: Bren Ten
Post by: armoredman on February 24, 2019, 02:33:01 AM
There is exactly one 10mm CZ I am aware of, a CZ97. It took some serious effort, from what I was told, and unlikely to be followed up on unless demand goes much higher. But, with a US factory now, who knows?
Title: Re: Bren Ten
Post by: calypsocoral on April 28, 2019, 11:46:50 PM
Yeah, there was talk of some experimentation by CZ into 10mm territory a few years back, including demo or two, as others have pointed out, but I'm not holding my breath on it.

Besides, if you want a Bren Ten, I recommend checking out the Tanfoglio Witness Elite series in 10mm. I'm currently saving up for one of these myself.

Of course, Grand Power just released a "long slide" version of their P40 in .40 cal and 10mm, and is selling for less than the more upscale versions of the Tanfoglio. I might consider one of those, if and only if I can find someone who can get some parts for it and do a bit of custom work...

But for now, the Tanfoglio model I'm saving up for is the Witness Elite Stock I. It pretty much nails that Dornhaus & Dixon Bren Ten aesthetic, and has a nice, stout cone-lock barrel, to boot.
Title: Re: Bren Ten
Post by: Shadow-Too on June 28, 2019, 09:03:41 PM
Tangfolio hardens their frames.  I have read that leads to cracks in the 10mm. 

https://czfirearms.us/index.php?topic=35909.0