The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: Dj1001 on March 30, 2019, 11:13:36 AM

Title: USA made P10-S upgrades (HBi theta trigger, CZC Optics plate, +2 Mag, olight)
Post by: Dj1001 on March 30, 2019, 11:13:36 AM

I know not too many people have gotten a chance to checkout or customize a p10-s. I had a rough time finding these modifications done or really any information so I figured I would share my guinea pig experience for future p10-s owners.

I've installed the HB industries Theta trigger, CZ +2 Magazine base plates, and the CZ Custom Optics plate adapter.

I'm happy to report all of these parts fit and function on the p10-s without any issues

The theta trigger actually made the trigger pull increase by roughly 8 ounces using the stock spring, with the included 3.5# striker spring trigger pull evens out, with the 3# spring trigger pull is reduced from stock by roughly 4-8 ounces.

The CZC optics plate was a perfect tight fit and holds my Vortex Viper dot as solid as could be.

The only light I have access to that fits the p10-s is the olight pl-mini 2. The original pl-mini does not fit.

+2 Magazine plates are factory CZ parts for the p-10/p-09, part #0722-0770-02ND. They fit exactly as intended and easily hold 14 rounds. Feeding seems to be fine with the stock springs. These base plates allow for a full comfortable 3 finger grip on the p10-s

(https://i.imgur.com/PwaxCiS.jpg)

(https://i.imgur.com/i01TbdN.jpg)

(https://i.imgur.com/eeddnP3.jpg)

Title: Re: USA made P10-S upgrades (HBi theta trigger, CZC Optics plate, +2 Mag, olight)
Post by: Craig M Arnold on March 30, 2019, 08:35:24 PM

Thank you for sharing the upgrades you have made to your P10s. I am going to get one as soon as I can find one for a reasonable price.

I already have the Olight Mini 2 and other than the HBI trigger, I think I'll leave mine pretty much stock.