The Original CZ Forum
ARCHIVES => CZF ARCHIVES II => Holsters and Accessories => Topic started by: Practical Shooter on April 22, 2019, 04:21:41 PM
-
With the lack of holsters made for the P10 serie handguns, I suggest one way to have holsters.
Why not just refurbished some of the hundreds of Glock holsters we already own?
https://youtu.be/poQ1d2T83rk
So far we have :
P10F
Double Alpha PDR Pro holster
Blade-Tech CZ P09 holster
Blade-Tech Glock 17 holster (after adding spacers)
CZ Shadow 2 holsters with wide bushing
P10C
S&W M&P 2.0 holster
-
I?ve run into the problem myself. I wanted to carry in a duty capacity so the problem was even worse. I have found that for a level III holster, if I use a Glock 17 holster with a light and a CZ P10c using a Surefire it fits. Also the Military/LEO rep for CZ emailed me saying Safariland would be coming out with more holster to accommodate lights by the end of April.
Sent from my iPhone using Tapatalk
-
I shot a match yesterday using an M&P 2.0 holster with a P10c
-
I shot a match yesterday using an M&P 2.0 holster with a P10c
How was the fit?
-
Better than the Glock holster. Both were fine.
-
Better than the Glock holster. Both werr finr.
Thanks, that's good news.
Anyone else has used their S&W holsters for the P10?
-
Here are 2 other videos covering holsters for the P10F, from CZ Fan Grrl in Canada
https://youtu.be/qqnDS6L7jr4
https://youtu.be/hZY3DY3GMdo
-
IDS (ISrael Defence Store) Level I and Level II Holster for the CZ P10 Series (here wieth my P10 F) and the P07 and P09 Pistols
I attached the low ride plattform on the P10 Holster. That is an optional accessorie.
They are sold in the US under the brand Orpaz Defence.
(https://i.ibb.co/x70RjxG/P1010638-Gro-Custom.jpg)
-
IDS (ISrael Defence Store) Level I and Level II Holster for the CZ P10 Series (here wieth my P10 F) and the P07 and P09 Pistols
I attached the low ride plattform on the P10 Holster. That is an optional accessorie.
They are sold in the US under the brand Orpaz Defence.
(https://i.ibb.co/x70RjxG/P1010638-Gro-Custom.jpg)
Thanks for sharing the Orpaz Defence holsters. Their prices are killer.
https://www.orpazdefense.com/eng/index.php/makes/cz
Here is my new review of the Red Hill Tactical Competition holster.
A bit higher in price ($60), but well worth it.
https://youtu.be/-CsXF6QtLSc
-
I found yet another holster, that fits the CZ P10 F.
In this case a Speedholster. The model is the Höppner & Schumann Speedsec 5 GFL
(https://i.ibb.co/ZxwYnKr/vlcsnap-2019-07-07-15h52m11s066.png) (https://ibb.co/x6cfpGb)
(https://i.ibb.co/D7mMMmD/vlcsnap-2019-07-07-15h52m40s528.png) (https://ibb.co/7GBppBJ)
-
i found that my P10C fits my holster for my Sig xcarry. they look different, but dimensionaly they're amazingly similar
-
Just a bit of information.
The german holster maker Höppner & Schumann is in the process of building a Speed/Raceholster for the P10-F based on the modell Höppner & Schumann Speedsec 5CW
I will get the prototype on monday for a testfit, to see that all measurments I sent also fit.
https://www.holster.de/shop/holster/speedsec-5/#cc-m-product-8675445520
They also have a universal holster, called Speedsec 6 GF and GF-L that can be adapted easily to the P10
I have the GF-L (pictures above) and will get the GF tomorrow.
https://www.holster.de/shop/holster/speedsec-5-2-0/#cc-m-product-8675565320
-
I have a Kydex holster from High Noon for my P10C that is great.
-
I can confirm that the Safariland 7TS Level 3 holster for the Glock 17 will work with the P10C and that the Safariland 6360RDS for the Glock 34 will work for the P10F. The 7TS requires a slight bit of modification and is a bit tight but after re-holstering it a few times it gets a lot smoother.
The 7TS holster requires a bit of shaving off material highlighted in the red. There are tabs that stop the X300 from going further down into the holster. Shave down these areas highlighted and you should be good.
(https://i.imgur.com/uEKBv3Zl.jpg)
It fits and ALS engages. Albeit the holster is a bit tight it has loosened up after re-holstering it several times.
(https://i.imgur.com/pU5onpZl.jpg)
(https://i.imgur.com/1z2f4xSl.jpg)
Thanks to @ monty_d_33 for letting me know.
-
Originally started With a P10c for IDPA; went with the CompTac holster designed for it. The muzzle end of the holster is molded inward and doesn’t accommodate the length of the F model. So once I made the switch to the F model, I got the corresponding CompTac.
*** for future buyers, the F model CompTac holster secures the C model like a glove and just as well as the F it’s designed for. Incidentally, the F model is not molded inward at the muzzle.
Now I easily switch model for competition and use the same holster.
-
(https://i.ibb.co/ZxwYnKr/vlcsnap-2019-07-07-15h52m11s066.png) (https://ibb.co/x6cfpGb)
That's a neat outfit, is that how Germans dress when they go shoot guns?
-
(https://i.ibb.co/ZxwYnKr/vlcsnap-2019-07-07-15h52m11s066.png) (https://ibb.co/x6cfpGb)
That's a neat outfit, is that how Germans dress when they go shoot guns?
The vest keeps nice and warm, when it`s cool or cold at the range.
The pants are regular working pants...nothing fancy. They are similar to 5.11 pants or similar.
The rest is fairly normal competition setup.
I go to the range that way, mostly at least, to keep my normal every day cloths clean.......
-
shellslinger what is the exact number on the holster in your picture? I am going nuts trying to find a holster for a p10c that will fit with a light and is level 3