The Original CZ Forum

GENERAL => Cajun Gun Works => Topic started by: Desert Tortoise on May 17, 2019, 01:24:37 PM

Title: Increase single action weight, tuned Omega trigger
Post by: Desert Tortoise on May 17, 2019, 01:24:37 PM

I have a P07 with all the Cajun parts including the hammer and defensive weight spring. I'm using the decocker levers.

My double action is where I want it at 7.5 lbs but single action is just over 2 lbs

How can I increase the single action weight by about 1 lb?

Title: Re: Increase single action weight, tuned Omega trigger
Post by: Sulpgnir on May 17, 2019, 08:05:17 PM

Quote from: Desert Tortoise on May 17, 2019, 01:24:37 PM

I have a P07 with all the Cajun parts including the hammer and defensive weight spring. I'm using the decocker levers.

My double action is where I want it at 7.5 lbs but single action is just over 2 lbs

How can I increase the single action weight by about 1 lb?

Work from front to back:  Heavier trigger return spring, heavier sear spring and heavier mainspring.  May need all three to add 1lb.  DA will be affected if heavier mainspring is used.

Title: Re: Increase single action weight, tuned Omega trigger
Post by: Tok36 on May 18, 2019, 07:22:13 AM

^^What he said.

Title: Re: Increase single action weight, tuned Omega trigger
Post by: Desert Tortoise on May 18, 2019, 11:03:01 AM

Thanks for the help

Title: Re: Increase single action weight, tuned Omega trigger
Post by: Desert Tortoise on September 21, 2019, 01:35:26 PM

Forgot to follow up.

Replaced the +sear spring (yellow) with the ++ sear spring (natural color). This got me the extra 1lb I was looking for.

Title: Re: Increase single action weight, tuned Omega trigger
Post by: Tok36 on September 22, 2019, 09:18:24 PM

Thank you for the follow up, it is always good to see the individual outcome of these things.

Title: Re: Increase single action weight, tuned Omega trigger
Post by: deadsh0t on October 02, 2019, 10:49:31 AM

So, to do the opposite (decrease SA weight) you need a lighter sear spring? All of this while maintaining the same DA weight.

I thought trigger return spring would affect both

Title: Re: Increase single action weight, tuned Omega trigger
Post by: Desert Tortoise on October 02, 2019, 11:52:29 AM

Cajuns Omega hammer requires an increased weight sear spring vs stock in order to prevent hammer follow.

Their sear spring kit has  + and ++ springs but I don't thing there is - spring available