The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: Elkins45 on October 12, 2019, 03:43:55 PM
-
MidwayUSA is currently selling factory CZ P-07 mags in 40 S&W for the crazy low price of $12.24! Don’t know how many they have or how long the sale will last, but they have five fewer than they started with because I just placed an order.
https://www.midwayusa.com/product/1006226186?pid=586697
-
I ordered a some last week for $15.72 and I thought that was a good deal.
-
Thanks for the tip!
For that price I'm willing to gamble and see if they work for 9mm
-
The followers for the Ruger P series guns were different for each caliber. 9mm & 40 S&W. They might be for the P-07 mags too. I would think the main difference between Ruger and CZ is that 9mm followers could be ordered from Ruger. But the 40 followers might work just fine. HB Industries has a new follower that seems to fit both 9mm & 40 S&W. There is no caliber distinction. CZ-USA only sells the complete magazine per their parts diagram. It would be worth the chance, IMHO, to buy the 40's and try them. https://hbindustries.net/store/shop/cz-p07-p09-p10-hi-viz-pink-magazine-follower/
-
CZ-USA has the 40 S&W mags on sale for $9.99. I noticed the bodies are different between the 9mm and 40 S&W. The 9mm has two creases down each side and the 40 does not. No clue how that would affect moving the 9mm rounds up the mag.
-
At that price I bought some just to scavenge the original P07/09 style base plates to use with my 9mm P07.
-
At that price I bought some just to scavenge the original P07/09 style base plates to use with my 9mm P07.
Anyone get these and can confirm that they have actual P07 baseplates???? Thanks.
-
At that price I bought some just to scavenge the original P07/09 style base plates to use with my 9mm P07.
Anyone get these and can confirm that they have actual P07 baseplates???? Thanks.
Got mine and I can confirm they do.
-
Got mine and I can confirm they do.
@ah3
Did you try 9mm in them? Wondering if they’ll work for 9mm mags
-
@ah3
Did you try 9mm in them? Wondering if they’ll work for 9mm mags
I haven't and don't plan to. The steel body of those .40 mags and 9mm ones are different. The .40 are full width while the 9mm ones have 2 additional depressions on each side along the full height to keep the smaller rounds stacked properly. Might work fine for trips to the range but I wouldn't trust them for anything else since CZ intentionally made them different across calibers.
-
9mm won't work in 40 mags but 40 will work in 9mm mags
-
I just ordered 5 more. MidwayUSA has them down to $11.02 with free shipping when the order is above $50. These will definitely NOT work with 9mm. I learned that the hard way when I did a range trip with my 9mm P07 and only brought .40 mags. I wish that CZ would dump their +2 mag bases for 1/3 the normal list too so I can properly configure these for 14 round carry. A 14+1 .40 P07 is a really nice carry option.
-
I just ordered 5 more. MidwayUSA has them down to $11.02 with free shipping when the order is above $50. These will definitely NOT work with 9mm. I learned that the hard way when I did a range trip with my 9mm P07 and only brought .40 mags. I wish that CZ would dump their +2 mag bases for 1/3 the normal list too so I can properly configure these for 14 round carry. A 14+1 .40 P07 is a really nice carry option.
Midway had the P09 40 caliber mags on sale for similar prices. As a reload that might be a possible option instead.
-
I just ordered 5 more. MidwayUSA has them down to $11.02 with free shipping when the order is above $50. These will definitely NOT work with 9mm. I learned that the hard way when I did a range trip with my 9mm P07 and only brought .40 mags. I wish that CZ would dump their +2 mag bases for 1/3 the normal list too so I can properly configure these for 14 round carry. A 14+1 .40 P07 is a really nice carry option.
Midway had the P09 40 caliber mags on sale for similar prices. As a reload that might be a possible option instead.
I might have to pick some of those up as well. There is a certain beauty to a 17+1 round .40 when you run those with the +2 extensions.
-
now I need to find a P-07 .40 to go with the cheap mags I bought 8)
-
My mags arrived. It appears to me the main difference is the .40 mags have much less bend at the feed lips. Anyone have tips on a clean way to bend the feed lips in?
And before anyone gets all cranky, these will be for range use, not for carry.
-
the .40S&W is starting down the long road towards obscurity...you also see .40 autos being sold cheap too. I walked away from the .40S&W six years ago
-
the .40S&W is starting down the long road towards obscurity...you also see .40 autos being sold cheap too. I walked away from the .40S&W six years ago
Just like 10mm, .357 mag and .38 Special disappeared into obscurity when agencies moved away from them. :)
-
10mm is back with a vengence with several companies making versions.
-
That was supposed to be tongue in cheek. .40, .45, .38 Spc and .357 are not going anywhere. They will be commonly available for decades to come.
-
That was supposed to be tongue in cheek. .40, .45, .38 Spc and .357 are not going anywhere. They will be commonly available for decades to come.
38 Spcl and 357Mag will be around forever. 40 and 45ACP will be extinct as soon as the last piece of brass is flung off into the weeds. The difference being... you don't need to bend over and go searching for 38 and 357 brass !!
;D
-
With the possibility of VA turning into vagiformia when the dims/libs/progs/socialists take over the state legislature in January this was a good opportunity to order some reduced capacity (10 round) magazines for the P07 and P09 .40's from Midway USA.
Those, at least will stay here come July if the standard magazines are made illegal.
At some point I may order some more reduced capacity magazines for the P01 and CZ75 Compact. The rest of the 9MM CZ's and the Tac Sport .40 will have to leave the state if our controlling side of the legislature decides what commiefornia has isn't restrictive enough and they really want to pay Bloomberg and Soros back for all that out of state money that helped get them elected. At this point I've got 6 or 7, I think, but would like to have a few more.
I guess I may need to get another single, or maybe a double IWB mag. pouch for the reduced capacity magazines since I'll feel the need to carry more magazines to stay with the same round count I have now. Just thought of that one.
Hopefully what comes out of all this is little or nothing (not holding my breath) and I can use the reduced capacity mags for range magazines instead of unloading a standard capacity mag. (or two) to use in load testing.
$10 each now beats 3 or 4 times that amount a few months from now.
-
With the possibility of VA turning into vagiformia when the dims/libs/progs/socialists take over the state legislature in January this was a good opportunity to order some reduced capacity (10 round) magazines for the P07 and P09 .40's from Midway USA.
I think I'd just move to a nice free red state. I certainly wouldn't stick around to catch a case of that vagiformia stuff, sounds like something you get a shot of penicillin for.
-
Early plans in place for saving the collection/toys. Will be talking to folks at the end of the month. Have access to out of state property (land/house, or two belonging to my mom) that I could move to if necessary. Wife is really not happy either.
But, the mags will make good range mags. if that becomes unnecessary and carry mags for the P07 if things go northeast. Remember when the phase was "if things go south?" Well, the south is the place to be these days and the north east states are the ones trying to move to what eastern Europe used to be.
Enough politics, before I get in trouble. Great deal on magazines one way or the other. Ten CZ magazines for $107 including shipping and taxes. Which they'd had the 9MM ten round mags at similar prices as I'd have bought some of those, too.
-
Remember when the phase was "if things go south?" Well, the south is the place to be these days and the north east states are the ones trying to move to what eastern Europe used to be.
The northeast has been very gun unfriendly for decades now so nothing new there. You all are losing it in the south. Look what your state just did. I'm really hoping at some point to get out of Ohio and move northwest but at least at this point Ohio is still not a bad place for gun owners.
-
Indiana is pretty solid too. Not much changing here...in any way, shape or form.
-
Just ordered 6 of these, I also recently added some Shield Arms +4 magazine extenders to a few of mine.
-
I found on the CZ-USA site that you can buy followers for the P-07 9mm & 40 mags. The are the same part for either caliber. I measured the distance between the 9mm feed lips and bent the 40 feed lips to a very close match. Only a few thou difference. The I found I couldn't get 15 rounds in the mag, the 40 spring has one more coil than the 9mm spring. I cut one coil off it, at the top, and bent the top loop to match the loop in the 9mm spring. I could then get 15 rounds in, needing an Uplula for the last round. It has been sitting fully loaded on my work bench for a week now. I've banged on the bench like seating the rounds several times, no rounds have come out. When I get out to shoot sometime (not soon) I'll try it out. Just thought you would like to know.
-
That’s good info to have. I run both 9mm and .40 P07s and knowing that I can possibly move the .40 mags into the 9mm family is helpful.
-
Anyone help me source a couple of these mags? I'd be happy to buy them outright or trade for other mags/parts i have laying around.
-
Anyone help me source a couple of these mags? I'd be happy to buy them outright or trade for other mags/parts i have laying around.
Welcome from Georgia.
Please take a few moments to familiarize yourself with all the sticky posts in the 'New Members' section because this is not your typical “anything goes” gun forum. Together with the Help Topics in the 'Important Information !' or 'FAQ' sub-section, these include instructions such as 'how to' post pictures on the forum.
Except for a few trusted suppliers, we are ad-free and do not sell your private information. Enjoy !