The Original CZ Forum

GENERAL => General Firearms Discussion => Topic started by: skin on October 31, 2019, 11:32:55 AM

Title: Cz rumors for 2020?
Post by: skin on October 31, 2019, 11:32:55 AM
 Anyone hear of any new rifles or pistols? New chamberings?
Title: Re: Cz rumors for 2020?
Post by: crosstimbers on October 31, 2019, 03:54:45 PM
I haven't.
Title: Re: Cz rumors for 2020?
Post by: CZShooterP01 on October 31, 2019, 04:38:18 PM
They didn't send me a new production progress report either. If only...
Title: Re: Cz rumors for 2020?
Post by: Hammer Time on October 31, 2019, 04:48:24 PM
P-05:

DA/SA, Omega trigger, polymer body

3.6" barrel
6.8" long
1.2" wide
5.2" high

9mm capacity - 12+1

Weight - 22oz

(I may have made this up.... :))
Title: Re: Cz rumors for 2020?
Post by: BStill on October 31, 2019, 05:28:38 PM
P-05:

DA/SA, Omega trigger, polymer body

3.6" barrel
6.8" long
1.2" wide
5.2" high

9mm capacity - 12+1

Weight - 22oz

(I may have made this up.... :))
sounds like a poly Rami

I would rather see a micro P-07. 3.2 in Barrel
4.2 in tall
single-stack (8-10 rounds)
1 inch thick

i.e., a DA/SA hammer in a P365 package

Sent from my LM-G710 using Tapatalk

Title: Re: Cz rumors for 2020?
Post by: SI VIS PACEM PARRABELLUM on October 31, 2019, 05:44:10 PM
CZ 2020 in .88 magnum.
Title: Re: Cz rumors for 2020?
Post by: Tok36 on October 31, 2019, 07:12:32 PM
CZ is going to stop production on all products that do not fit within the orignal CZ 75 variant trigger system. They finally came to the conclusion that all the rest of that stuff just is not that cool and above everything els they want to be cool.

They may continue to make the rifles because i do not care about the rifles.  ;D
Title: Re: Cz rumors for 2020?
Post by: eastman on October 31, 2019, 08:29:49 PM
I'm certain they are looking at more ways to use magnets.   O0
Title: Re: Cz rumors for 2020?
Post by: Earl Keese on October 31, 2019, 09:05:16 PM
Rami in 10mm.  :P
Title: Re: Cz rumors for 2020?
Post by: Hammer Time on October 31, 2019, 09:15:03 PM
sounds like a poly Rami....

Nah, Rami has a lot shorter barrel and a shorter overall height. I'm talking more like a CZ version of the Sig P225A-1.  ;)
Title: Re: Cz rumors for 2020?
Post by: Tok36 on October 31, 2019, 09:39:41 PM
Rami in 10mm.  :P

Why not just have a RAMI that shoots the entire slide off of the frame at the target. I mean you would only get one shot but it would be a good one. ;D
Title: Re: Cz rumors for 2020?
Post by: Earl Keese on October 31, 2019, 09:43:24 PM
Rami in 10mm.  [emoji14]

Why not just have a RAMI that shoots the entire slide off of the frame at the target. I mean you would only get one shot but it would be a good one. ;D
I just figured I'd beat the 10mm guys to the punch. If everybody that asked for them actually bought them . . . ;)

Sent from my SM-G970U using Tapatalk

Title: Re: Cz rumors for 2020?
Post by: skin on November 01, 2019, 12:54:58 AM
 Why not a rami 3 shot 50 action express? Lol
Title: Re: Cz rumors for 2020?
Post by: bull on November 01, 2019, 02:52:02 PM
Cz 75 compact all steel with decocker in 10mm (single stack)...rami needs to be discontinued for the benefit of human kind...Bren 2 carbine on dealer shelves by CHRISTmas so i can get myself a present
Title: Re: Cz rumors for 2020?
Post by: Phlyers13 on November 02, 2019, 06:44:40 AM
As long as we are starting rumors, I bet we see a single stack p-10 in the near future. Seems to be the next logical step in the evolution.
Title: Re: Cz rumors for 2020?
Post by: BStill on November 02, 2019, 07:31:16 AM
As long as we are starting rumors, I bet we see a single stack p-10 in the near future. Seems to be the next logical step in the evolution.
yes.  and please include a version with a decocker button like the P99cAS to simulste a DA/SA action.

Sent from my LM-G710 using Tapatalk

Title: Re: Cz rumors for 2020?
Post by: timetofly on November 02, 2019, 08:00:18 AM
A 10mm and 45ACP chambering for the EVO is what a little bird told me.  I'd bet that there would be a considerable demand for those.  Let me see, matching 9mm, 10mm and 45ACP EVOs with trigger jobs, by the door.  Imagine the dilemma that would create.
Title: Re: Cz rumors for 2020?
Post by: Tok36 on November 02, 2019, 09:15:03 AM
Maybe CZ will get the telegram about the FPRP issues and upgrade it at the factory.  ;D
Title: Re: Cz rumors for 2020?
Post by: Vinny on November 02, 2019, 12:11:05 PM
P-05:

DA/SA, Omega trigger, polymer body

3.6" barrel
6.8" long
1.2" wide
5.2" high

9mm capacity - 12+1

Weight - 22oz

(I may have made this up.... :))
sounds like a poly Rami

I would rather see a micro P-07. 3.2 in Barrel
4.2 in tall
single-stack (8-10 rounds)
1 inch thick

i.e., a DA/SA hammer in a P365 package

Sent from my LM-G710 using Tapatalk

Ya mean something like this.....??
(https://i.imgur.com/p3Yvuyw.jpg?1)
Or this......??
(https://i.imgur.com/2zjYWi0.jpg?1)

+1 An updated CZ single or 1-1/2 stack 10+1 Subcompact or Micro 9 DA/SA decocker! Oh Yeah!   O0
Title: Re: Cz rumors for 2020?
Post by: Claymore504 on November 10, 2019, 03:45:43 PM
I would love a single stack DA/SA gun about the size of the M&P Shield. I know ther is the Springfield xde, but I really do not like the xd line.
Title: Re: Cz rumors for 2020?
Post by: CZ_FANATIC on November 10, 2019, 09:52:27 PM
My confidential source told me there's going to be a 20D in .50AE
Title: Re: Cz rumors for 2020?
Post by: Tyerone on November 11, 2019, 07:44:42 AM
I'm certain they are looking at more ways to use magnets.   O0

I'm reading this 2 different ways.  Either CZ won't be needing magnets for gun metals because they are tripling down on the polymer crap...
OR

The new uses for magnets will be BECAUSE they are finally listening to its base of old farts who love steel, including stainless steel versions of the traditional compact (except with beavertail enhancement) and a SS single stack sub compact for CC.  Bravo CZ for taking this second path!
 8)
Title: Re: Cz rumors for 2020?
Post by: dwhite on November 11, 2019, 06:55:35 PM
I'm certain they are looking at more ways to use magnets.   O0

I'm reading this 2 different ways.  Either CZ won't be needing magnets for gun metals because they are tripling down on the polymer crap...
OR

The new uses for magnets will be BECAUSE they are finally listening to its base of old farts who love steel, including stainless steel versions of the traditional compact (except with beavertail enhancement) and a SS single stack sub compact for CC.  Bravo CZ for taking this second path!
 8)

I'm pretty sure he's referring to CZ's recent announcement of their "All Terrain" line of shotguns. The double-barrel models include rare earth magnets in the ejector/extractor to keep unfired shells from falling out by accident when the action is open. Actually, a pretty clever idea.
Title: Re: Cz rumors for 2020?
Post by: BG ARMORY on November 11, 2019, 08:15:40 PM
Rami in 10mm.  [emoji14]

Why not just have a RAMI that shoots the entire slide off of the frame at the target. I mean you would only get one shot but it would be a good one. ;D
I just figured I'd beat the 10mm guys to the punch. If everybody that asked for them actually bought them . . . ;)

Sent from my SM-G970U using Tapatalk

always got to be the first to say 10mil is best mil
Title: Re: Cz rumors for 2020?
Post by: eastman on November 11, 2019, 08:22:39 PM
I'm certain they are looking at more ways to use magnets.   O0

I'm reading this 2 different ways.  Either CZ won't be needing magnets for gun metals because they are tripling down on the polymer crap...
OR

The new uses for magnets will be BECAUSE they are finally listening to its base of old farts who love steel, including stainless steel versions of the traditional compact (except with beavertail enhancement) and a SS single stack sub compact for CC.  Bravo CZ for taking this second path!
 8)

I'm pretty sure he's referring to CZ's recent announcement of their "All Terrain" line of shotguns. The double-barrel models include rare earth magnets in the ejector/extractor to keep unfired shells from falling out by accident when the action is open. Actually, a pretty clever idea.

yes, All Terrain FTW!
Title: Re: Cz rumors for 2020?
Post by: DOC 1500 on November 11, 2019, 08:47:32 PM
S&W 3rd generation  pistols are some of the finest semi-auto Pistols made.
I think it's time to get back to stainless steel.
Title: Re: Cz rumors for 2020?
Post by: Vinny on November 11, 2019, 09:13:45 PM
S&W 3rd generation  pistols are some of the finest semi-auto Pistols made.
I think it's time to get back to stainless steel.
A retired MIL & LEO friend recently showed me his former duty pistol; a 3rd gen S&W 5906 stainless he was allowed to purchase from the Department with over 80,000 rounds.
He sent it back to S&W a few months back, and they went through it replacing a few parts, springs, new barrel, and polished it up like new again...gratis & thanking him for his service.
Now that's what I call customer commitment!
Title: Re: Cz rumors for 2020?
Post by: Tyerone on November 12, 2019, 06:23:29 PM
DRAT! >:(

I'm certain they are looking at more ways to use magnets.   O0

I'm reading this 2 different ways.  Either CZ won't be needing magnets for gun metals because they are tripling down on the polymer crap...
OR

The new uses for magnets will be BECAUSE they are finally listening to its base of old farts who love steel, including stainless steel versions of the traditional compact (except with beavertail enhancement) and a SS single stack sub compact for CC.  Bravo CZ for taking this second path!
 8)

I'm pretty sure he's referring to CZ's recent announcement of their "All Terrain" line of shotguns. The double-barrel models include rare earth magnets in the ejector/extractor to keep unfired shells from falling out by accident when the action is open. Actually, a pretty clever idea.

yes, All Terrain FTW!
Title: Re: Cz rumors for 2020?
Post by: DOC 1500 on November 12, 2019, 06:55:33 PM
S&W 3rd generation  pistols are some of the finest semi-auto Pistols made.
I think it's time to get back to stainless steel.
A retired MIL & LEO friend recently showed me his former duty pistol; a 3rd gen S&W 5906 stainless he was allowed to purchase from the Department with over 80,000 rounds.
He sent it back to S&W a few months back, and they went through it replacing a few parts, springs, new barrel, and polished it up like new again...gratis & thanking him for his service.
Now that's what I call customer commitment!

I have a 4516-1 and 4006 TSW CHP TSW is tactical Smith & Wesson, CHP stands for California Highway Patrol because it was one of theirs.
Title: Re: Cz rumors for 2020?
Post by: huskerlrrp on November 12, 2019, 08:47:04 PM
Zero carbon footprint firearms and accessories from sustainable materials.
Title: Re: Cz rumors for 2020?
Post by: Vinny on November 12, 2019, 11:08:12 PM
S&W 3rd generation  pistols are some of the finest semi-auto Pistols made.
I think it's time to get back to stainless steel.
A retired MIL & LEO friend recently showed me his former duty pistol; a 3rd gen S&W 5906 stainless he was allowed to purchase from the Department with over 80,000 rounds.
He sent it back to S&W a few months back, and they went through it replacing a few parts, springs, new barrel, and polished it up like new again...gratis & thanking him for his service.
Now that's what I call customer commitment!

I have a 4516-1 and 4006 TSW CHP TSW is tactical Smith & Wesson, CHP stands for California Highway Patrol because it was one of theirs.
Those 3rd Gen S&W's were some very fine pistols indeed. The TSW's are especially sought after today; as well as the 3913 or the little CS9 Chief's Special which remain among the best stainless hammer-fired single stack DA/SA's ever. The cost to produce today would more likely put them into Dan Wesson territory.  But you can still find them at reasonable prices if you look hard enough.

Yeah; if we're lucky for 2020 we might see more optic-ready CZ's and if we're really lucky maybe a P-07s (aka: P-05?)   O0
Title: Re: Cz rumors for 2020?
Post by: beanz2 on November 13, 2019, 10:37:30 AM
Curious to see what special editions of the DWX would Dan Wesson make.


.
Title: Re: Cz rumors for 2020?
Post by: rbuzz00 on November 17, 2019, 10:06:26 AM
Anyone hear of any new rifles or pistols? New chamberings?

Instead of promising all sorts of new products, I would rather CZ concentrate on actually getting out the products that were promised already and should be out in public hands, such as the Bren 2 Ms and Bren 2 carbines.

Then continue their work on coming out with great new products. Don't get me wrong, I appreciate CZ's excellent product line and eagerly look forward to new products, but I would like to see them actually deliver their new products on a more timely basis.
Title: Re: Cz rumors for 2020?
Post by: Vinny on November 17, 2019, 11:12:28 AM
Anyone hear of any new rifles or pistols? New chamberings?

Instead of promising all sorts of new products, I would rather CZ concentrate on actually getting out the products that were promised already and should be out in public hands, such as the Bren 2 Ms and Bren 2 carbines.

Then continue their work on coming out with great new products. Don't get me wrong, I appreciate CZ's excellent product line and eagerly look forward to new products, but I would like to see them actually deliver their new products on a more timely basis.
This makes perfect sense. ^ ^^
However, there may be two agendas at play here. CZUSA and CZUB may have different objectives.
CZUSA will be getting the new USA Factory in Arkansas up to speed. I would assume 1st and foremost concentrating on filling the pipeline with P-10 F,C,S in the various iterations including Optic-ready with the necessary plates and all. Then maybe they'll bring production of P-09 & 07 to USA, concentrating the new production line on similar handguns. Maybe we'll eventually see a P-05 (P-07s?) and if we're lucky maybe Optics-ready versions of the same.
Meanwhile...CZUB and Dan Wesson may be where we'll actually see the eagerly awaited promised items, and maybe a few new tricks.
Really, I dunno, I have no inside info but just applying logic gleaned from many years in manufacturing.
But as long as we're talk'in about rumors, I for one would sure like to see an optics-ready hammer-fired, Omega DA/SA pistol in the form of P-09, P-07 or P-05 sub-compact. Hey Santa, Christmas is coming!
Title: Re: Cz rumors for 2020?
Post by: armoredman on November 21, 2019, 02:14:49 AM
The DWX is the only one I have heard of, and it's out. I have no idea what's next, but I'll bet it will be cool. :)