The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: sportsnut on January 05, 2020, 11:36:40 AM
-
Just picked this P-10F optics ready up last night. My Trijicon SRO will be here this Tuesday. The trigger is pretty darn good right out of the box with a clean crisp break. The ten pull average was 4lb.0.9oz.
(https://i.imgur.com/1sDACGu.jpg)
(https://i.imgur.com/XyrxmOO.jpg)
-
Tomorrow can't get here soon enough.. New pistol, new holster, check. Mounting plate for SRO, check. 4 mags at 19 rounds, check. Enough ammo, lol check.
(https://i.imgur.com/DqvW27w.jpg)
-
Congrats. I have 4 P10’s. Two are F’s. All have been great performers and reliably predictable.
Enjoy it!
-
Congrats on the P10F. My P10S with an RMR has been perspective altering, to say the least. I think that you’ll be quite happy with the combo when you get it all together. I’m 56 years old and have eye issues and the RMR equipped pistol lets me shoot like I’m 30 again.
-
I am really digging my USPSA Carry Optic gun
P-10F optic ready
CZ plate with Trijicon SRO 5moa dot
HBI Trigger
4oz of tungsten crammed in the large back strap
Henning basepads for 22+1 capacity
Silicone Carbide grip treatment
(https://uploads.tapatalk-cdn.com/20200107/a87f5fda193852258e0affcd4393aa74.jpg)
Sent from my iPhone using Tapatalk
-
After surprising success with a P-09 as a bullseye centerfire match gun, I've been practicing with my P-10F as a striker fired bullseye match gun. Pretty good results so far in practice. Much better than most people would have ever thought possible.
-
I'm getting pretty stoked to get this thing together!
-
I am really digging my USPSA Carry Optic gun
P-10F optic ready
CZ plate with Trijicon SRO 5moa dot
HBI Trigger
4oz of tungsten crammed in the large back strap
Hemming basepads for 22+1 capacity
Silicone Carbide grip treatment
(https://uploads.tapatalk-cdn.com/20200107/a87f5fda193852258e0affcd4393aa74.jpg)
Sent from my iPhone using Tapatalk
Bad ass!!
-
I couldn't help myself after reading all the reviews on the HB industries trigger.
It's on the way, plus an extra set of pins!
CZ P10 Frame Pin Set × 1 $3.80
CZ P10 Theta Trigger Kit - Red × 1 $65.00
-
I couldn't help myself after reading all the reviews on the HB industries trigger.
It's on the way, plus an extra set of pins!
CZ P10 Frame Pin Set × 1 $3.80
CZ P10 Theta Trigger Kit - Red × 1 $65.00
Great choice
Sent from my iPhone using Tapatalk
-
I got the SRO mounted and headed for the range. The SRO was pretty close OTB, just a few clicks of elevation and a bit on the windage. I'm really impressed with this set-up from 5 yards to 40 yards I was killing the 6" plates. I put 100 rounds through it to break the cherry and it was 100% flawless.
I really like that the dot doesn't leave the window during recoil.
(https://i.imgur.com/B1PV9Ii.jpg)
(https://i.imgur.com/M4em3I9.png)
-
I really like that the dot doesn't leave the window during recoil.
very cool, fired standing or sitting?
edit: do you think it'd be easier to hit further out if the dot was smaller?
-
Nice set up! I really like my P-10F. Great weapon.
-
very cool, fired standing or sitting?
edit: do you think it'd be easier to hit further out if the dot was smaller?
[/quote]
All shooting was from the standing position.
From 40 yards with the 5.0 MOA dot set at about 3 clicks from dimmest, it wasn't even close to covering the 6" steel plate.
-
I just bought another one that I am setting up for production class.
(https://uploads.tapatalk-cdn.com/20200109/6ad50c31fc4d9298dc0a5a9b72b8e586.jpg)
Sent from my iPhone using Tapatalk
-
I just bought another one that I am setting up for production class.
(https://uploads.tapatalk-cdn.com/20200109/6ad50c31fc4d9298dc0a5a9b72b8e586.jpg)
Sent from my iPhone using Tapatalk
Yeah buddy!!
-
I put the new HBI trigger and new striker spring in this morning. This is all I'm going to do to this, so I'm calling it done for now. Both the factory trigger and the HBI have {had} a really nice break.
Edit; After looking at the picture of the barrel where recoil spring seats I had to break it down. The picture looks like the steel has a fracture in it. It was just a little oil and optical illusion. It did kinda freak me out when I saw the picture though.
Factory trigger with 10 pull average:
(https://i.imgur.com/XyrxmOO.jpg)
HBI trigger and striker spring 10 pull average:
(https://i.imgur.com/Pia16gq.jpg)
(https://i.imgur.com/Wn19gQS.jpg)
(https://i.imgur.com/9W5xf8N.jpg)
-
HBI triggers are the shizznit!!!
Sent from my iPhone using Tapatalk
-
HBI triggers are the shizznit!!!
Sent from my iPhone using Tapatalk
I never would have thought without any polishing and just a striker spring change and HBI trigger I would be in the 3lb pull range. Pretty darn impressive for a striker-fired pistol.
-
I ran 180 rounds through it today and then checked trigger pull. It was down a few ounces from the last outing. This set-up is really nice. My buddy shoots with an RMR and is excited to try the SRO when we shoot this Friday.
Ten pull averages.
Factory trigger with 10 pull average OTB unfired:
(https://i.imgur.com/3Cvp82s.jpg)
Before the 180 rounds today. The first test after striker spring and trigger install:
(https://i.imgur.com/1dgqta2.jpg)
Today after 180 rounds:
(https://i.imgur.com/QgHb54R.jpg)