The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: COJeff on March 03, 2020, 10:31:39 PM

Title: Evo SBR - Zhukov or ACR stock?
Post by: COJeff on March 03, 2020, 10:31:39 PM
Looking for suggestions on a stock for a cz evo.  Thoughts on ACR vs Zhukov?
Title: Re: Evo SBR - Zhukov or ACR stock?
Post by: TheChunkNorris on March 04, 2020, 09:06:44 AM
B&T stock (https://uploads.tapatalk-cdn.com/20200304/1c92a22eceb81c9c07cddbf7c3b77fc5.jpg)
Title: Re: Evo SBR - Zhukov or ACR stock?
Post by: SilentRecon on March 04, 2020, 01:42:54 PM
I'm a fan of ACR stock but I like the B&T equally as well! Not so much other options IMO. Here is mine with ACR for reference(https://uploads.tapatalk-cdn.com/20200304/44d956a9a67557db02469d21f93913d0.jpg)(https://uploads.tapatalk-cdn.com/20200304/808ac8edebbac01693cee90de78a8491.jpg)

Sent from my SM-N950U using Tapatalk

Title: Re: Evo SBR - Zhukov or ACR stock?
Post by: TheChunkNorris on March 04, 2020, 01:53:37 PM
I'm a fan of ACR stock but I like the B&T equally as well! Not so much other options IMO. Here is mine with ACR for reference(https://uploads.tapatalk-cdn.com/20200304/44d956a9a67557db02469d21f93913d0.jpg)(https://uploads.tapatalk-cdn.com/20200304/808ac8edebbac01693cee90de78a8491.jpg)

Sent from my SM-N950U using Tapatalk
I absolutely agree, ACR or B&T are the best options other than the factory part which is nice too. I had a Lage on there for a while but felt it was too long even with the factory front end. Only thing I disliked about the ACR was how high I was on the rifle when shooting, so using the riser wasn’t an option. The only real benefits to the B&T is the weight and the fact you can still use irons.

 
Title: Re: Evo SBR - Zhukov or ACR stock?
Post by: bravo5two on March 05, 2020, 07:07:14 AM
OP might want to think about cheek weld if you're shooting a low mount RDS co-witness with the factory sights.  The ACR might give you a better cheek weld than the Zhukov.

I know this wasn't in the inquiry, but IMO, I would use the factory CZ Scorpion stock, it was designed to be used in the original Scorpion as a SMG platform.
Title: Re: Evo SBR - Zhukov or ACR stock?
Post by: lorazepam on March 09, 2020, 06:51:36 PM
Those seem to raise the sight over bore height, which is not optimal for a cab type weapon. T would stick with factory, other one that follows the drop. JMO, not that it is worth anything.
Title: Re: Evo SBR - Zhukov or ACR stock?
Post by: Hemiscorpius lepturus on March 10, 2020, 03:13:28 AM
I have an optic with lower 1/3 co-witness to AR sights (magpul mbus) and a Zhukov stock. I had to add a 1/4" riser to the stock to get a perfect on-cheek sight picture without subsequent adjustment.

Since the ACR stock is angled, that might cancel out that need, but if you do an absolute co-witness or want to use CZ irons, it would be too high, and the Zhukov would be a better option