The Original CZ Forum
CZ PISTOL CLUBS => CZ85, 85B, & 85 Combat => Topic started by: schutz85C on June 05, 2020, 09:05:36 PM
-
Well, last year I installed the CGW race trigger and enjoyed the improved trigger pull weight in SA.
A few hours ago ,I installed the CZC pre-B disco (that came in the kit #10363).
It turned out to be a 'drop in' fit !
It removed alot of take up in the SA. May have better reset in SA and the trigger pull weight coincidentally measured a bit less then pre-disco just before the switch. Probably did well for the DA trigger position.
Funny, when first testing the SA, my finger's muscle memory went long as I used to have a longer take up.
Left me temporarily puzzled. Ha !!
Good times !!
Later the range fun ! 8)
-
Pics! I bought my 85 in 1990 in (West) Germany when I was active duty. Didn't realize at the time what an iconic gun I was buying. Still have the box and everything. Its old enough now I'll leave it bone stock and enjoy it.
-
https://imgur.com/a/vjokI9O
I could not figure out how to post an actual picture.
This one shows the average SA trigger pull weight of 2 Lbs. 9.7 ounces Average of five pulls right after the new disco. It may have been a coincidence but this average was a bit lower than the average I took right before disassembly for the new disco. It already had the CGW race hammer installed.
-
Nice grips! What are those?
-
The first cz I got was a 2012 85 combat two tone , and still one of my favorites, all I added were grips and a fiber optic.😎😎
-
https://imgur.com/a/vjokI9O
I could not figure out how to post an actual picture.
This one shows the average SA trigger pull weight of 2 Lbs. 9.7 ounces Average of five pulls right after the new disco. It may have been a coincidence but this average was a bit lower than the average I took right before disassembly for the new disco. It already had the CGW race hammer installed.
Here you go...
(https://i.imgur.com/6JxVrH4.jpg)
-
one observation i noticed recently after installing the short reset and extended firing pin in an 8 yr old pistol that had all the rest of the cgw pro pkg done several yrs ago was that the trigger weights of the gun before i did the recent mods were a a bit heavier in single and double action. i pondered how it could be and came to the conclusion that the initial weights before i took the gun apart were with a fired gun that was not totally stripped and cleaned. the trigger pulls after the latest mods were with a stripped down, sear removed, thorough cleaning and lubrication. made sense that the trigger pulls were slightly less with a clean action.
-
Thanks for the picture 'Painter' !
Yes mkd, variables,variables,variables.. !!