The Original CZ Forum

GENERAL => Cajun Gun Works => Topic started by: Hog Driver on September 15, 2020, 03:55:20 PM

Title: Does the RRK change the single action trigger at rest position?
Post by: Hog Driver on September 15, 2020, 03:55:20 PM
I know the DA position is shorter, but is SA changed?
Title: Re: Does the RRK change the single action trigger at rest position?
Post by: mkd on September 15, 2020, 03:57:54 PM
call CGW they will tell you exactly how it effects the action. i have done two of them but honestly don't remember.
Title: Re: Does the RRK change the single action trigger at rest position?
Post by: Tok36 on September 15, 2020, 07:16:27 PM
   Generally, the installation of a CGW Reach Reduction Kit will reduce the at rest SA trigger position by some amount. It depends on what disconnector you have installed before you replace it with the CGW RRK disconnector and which CGW RRK kit you are installing. The at rest SA trigger position is a product of the thickness of the inside of the disconnectors hook.

   In a Shadow or other non Firing Pin Block CZ model, an oversized RRK disconnector can be hand fit to achieve near zero SA pre travel. In a CZ 75 B or other CZ with the FPB intact, you are somewhat limited in how much the SA pre travel can be reduced. This is because the FPB parts require a certain amount of SA pre travel to function.



Title: Re: Does the RRK change the single action trigger at rest position?
Post by: Hog Driver on September 27, 2020, 05:41:08 PM
Thanks for the good info!