The Original CZ Forum

GENERAL => Cajun Gun Works => Topic started by: THarbison on September 26, 2020, 03:19:08 PM

Title: SP-01 Phantom help
Post by: THarbison on September 26, 2020, 03:19:08 PM

I have a canonized phantom and am for the most part very happy. Any tricks to cleaning up the little duck bill and spring that lifts the trigger bar on a phantom? Mine is pretty gritty feeling.

Sent from my SM-N950U using Tapatalk

Title: Re: SP-01 Phantom help
Post by: AZ_CZ on September 26, 2020, 03:32:22 PM

Quote from: THarbison on September 26, 2020, 03:19:08 PM

I have a canonized phantom and am for the most part very happy.

I want to offer my congratulations on one of the best spell-check errors I’ve seen. I too feel like some of my CZ should be bestowed this appellation after fitting CZC or CGW parts.


I usually polish the lifter arm and the firing pin block when doing an upgrade. There’s a good sticky in the gunsmithing Section.

Title: Re: SP-01 Phantom help
Post by: THarbison on September 26, 2020, 04:04:18 PM

[emoji17] Lol. Gotta love auto correct.

Sent from my SM-N950U using Tapatalk

Title: Re: SP-01 Phantom help
Post by: THarbison on September 26, 2020, 04:09:03 PM

Unfortunately the phantom has the parts circled in the picture that aren't in to many of the other CZ pistols. I believe the only other is the polymer Rami. Those parts are the source of my crunchiness.(https://uploads.tapatalk-cdn.com/20200926/cad8e9e85685c1ad7a640ff41c009be8.jpg)

Sent from my SM-N950U using Tapatalk