The Original CZ Forum

CZ PISTOL CLUBS => CZ SP-01 and variants => Topic started by: Lock-n-load on November 26, 2020, 09:21:11 PM

Title: Sp01 recoil spring
Post by: Lock-n-load on November 26, 2020, 09:21:11 PM

Shooting factory s&b 124 gr. range  ammo in cz sp01 tactical .13 lb main spring and lighter fireing pin and plunger springs and lighter trigger return spring .is there any advantage to putting in a 11 lb recoil spring or is that only if you are useing reduced power ammo and will damage your slide. ... been reading conflicting ideas about this. Range only pistol.

Title: Re: Sp01 recoil spring
Post by: timmy75 on November 27, 2020, 03:23:50 AM

you can try to study this:

https://cajungunworks.com/how-to-select-the-proper-recoil-spring/

Title: Re: Sp01 recoil spring
Post by: Lock-n-load on November 27, 2020, 01:03:27 PM

Quote from: timmy75 on November 27, 2020, 03:23:50 AM

you can try to study this:

https://cajungunworks.com/how-to-select-the-proper-recoil-spring/

This is what I read and thought I should remove the 11lb and go back to stock since I’m not useing lower power ammo. That’s why I was asking.