The Original CZ Forum
CZ PISTOL CLUBS => CZ CLONE CLUB => Topic started by: ScottH on January 03, 2021, 10:47:07 AM
-
I was doing some reading in here about the TZ pistols and came across the phrase "transitional"...Now I'm curious. I have an 1988 and a 1990 Series 88 TZ75, there are quite a few differences in them, is one a transitional?
(https://i.imgur.com/Kjpejle.jpg?1)
(https://i.imgur.com/jgB98Bg.jpg?1)
(https://i.imgur.com/oPb3IWO.jpg?1)
And...
(https://i.imgur.com/yZxetuL.jpg?1)
(https://i.imgur.com/61Q1lAP.jpg?1)
(https://i.imgur.com/tuawE8p.jpg?1)
-
The scalloping of the front frame Dust cover and the hooked Trigger guard, make both Transitional to what the Witness Pistols would finally look like.
Also note the Hammer difference between the two with the 1990 version having the blunter hammer profile, which would later transition to the Ring Style.
The last Tz75 series Pistols will have a straight frame Dust cover, a rounded Trigger Guard, and a ringed Hammer, and not many of these were made before
FIE became EAA and the Pistols were then named Witness.
-
Thank you sir...
-
Thank you sir...
You are most Welcome! :)
-
There are differences in:
1. curvature of the triggers (one is a deeper curve than the other),
2. hammers,
3. hammer pins (one is a roll pin, the other and easy take-down),
4. the trigger bar spring assembly (may be a difference in the way the 4 pieces are held together, one used a tiny roll pin and the other used an easy slide pin),
5. the slide lock/release is different,
6. the safety levers (one has the hole that can make it easier to remove/reinstall the lever in reference to the safety detent) and
7. the barrel may or may not have the serial number stamped on it but that may be due to something else.
These are just some of the things I’ve noticed that may or may not be relevant. I really like the earlier version of the Series 88’s.
Oh, and I don’t know why, but I’ve seen some versions with the slanted slide serrations like these and some with “CZ” styled vertical slide serrations.