The Original CZ Forum

GENERAL => CZ Gunsmithing => Topic started by: Kraquin on January 31, 2021, 03:51:15 PM

Title: Can't Remove Trigger
Post by: Kraquin on January 31, 2021, 03:51:15 PM

Replacing trigger on CZ-75 Compact. Manual Safety

I removed the trigger pin and per the video I'm watching the trigger assembly should lift high enough to remove the trigger retaining pin...... but it won't. It looks like the trigger bar is preventing the assembly from getting high enough. I suspect it is because the hammer is cocked. Is there a way to release the hammer or will I have to reinsert the trigger pin?

Any tips much appreciated.

Title: Re: Can't Remove Trigger
Post by: jurek on January 31, 2021, 04:01:34 PM

When you punch the pin out, the trigger return spring should go freely. Then push the trigger up from the trigger bar side and pull it forward from the top. There is nothing that keeps trigger bar.

Title: Re: Can't Remove Trigger
Post by: Kraquin on January 31, 2021, 04:13:51 PM

The hammer wasn't down so I put the pin back in and was able to drop the hammer and provise enough clearance to remove the trigger pin.

thanks

Title: Re: Can't Remove Trigger
Post by: jurek on February 01, 2021, 12:24:18 PM

Quote from: Kraquin on January 31, 2021, 04:13:51 PM

The hammer wasn't down so I put the pin back in and was able to drop the hammer and provise enough clearance to remove the trigger pin.

thanks

 :) great !