The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: Maynard on March 07, 2021, 07:53:06 PM

Title: P-10 Picture Thread
Post by: Maynard on March 07, 2021, 07:53:06 PM
Let's see those P-10s, stock and built pistols welcome.

(https://imagizer.imageshack.com/v2/800x600q90/924/YwkTPd.jpg) (https://imageshack.com/i/poYwkTPdj)
Title: Re: P-10 Picture Thread
Post by: Maynard on March 07, 2021, 07:54:15 PM
(https://imagizer.imageshack.com/v2/800x600q90/923/iJE2tj.jpg) (https://imageshack.com/i/pniJE2tjj)
Title: Re: P-10 Picture Thread
Post by: Arndog123 on March 07, 2021, 09:47:46 PM
(https://i.ibb.co/mRGV9Qc/1763349-E-0247-422-E-97-B1-85-B5-F9-A7056-B.jpg)
Title: Re: P-10 Picture Thread
Post by: Hammer Time on March 07, 2021, 10:11:55 PM
(https://imagizer.imageshack.com/v2/1024x768q90/924/tJqjVy.jpg)
Title: Re: P-10 Picture Thread
Post by: kb377 on March 08, 2021, 07:17:16 AM
Nothing fancy...

FDE is current duty gun, OR model will be as soon as holster gets here. (https://uploads.tapatalk-cdn.com/20210308/c84461ceb7ddace3f34a273a7a22ea09.jpg)
Title: Re: P-10 Picture Thread
Post by: DanMore on March 08, 2021, 03:47:12 PM
I`m a purist.....

(https://i.ibb.co/nzptW4P/P1010426-Gro.jpg)
Title: Re: P-10 Picture Thread
Post by: cfrock on March 08, 2021, 08:13:29 PM
I have a few.

(https://i.imgur.com/49r9PXR.jpg)
Title: Re: P-10 Picture Thread
Post by: Maynard on March 09, 2021, 07:32:32 PM
Quote from: cfrock on March 08, 2021, 08:13:29 PM
I have a few.

Very nice.

I'm going to put an Easy on/Easy off comp on this when I can decide on one.

(https://imagizer.imageshack.com/v2/800x600q90/924/4kkLVC.jpg) (https://imageshack.com/i/po4kkLVCj)
Title: Re: P-10 Picture Thread
Post by: KineticAp1 on March 10, 2021, 09:47:50 AM
My current set up on my P10F

(https://uploads.tapatalk-cdn.com/20210310/fca316c34fc32354015ea14a3eb3916b.jpg)


Sent from my iPhone using Tapatalk
Title: Re: P-10 Picture Thread
Post by: KineticAp1 on March 10, 2021, 09:52:03 AM
I had a 2nd P10F at one point that was set up with a PMM comp and SRO

(https://uploads.tapatalk-cdn.com/20210310/587c011e8ef7c36b2705a76313c1a0e7.jpg)


Sent from my iPhone using Tapatalk
Title: Re: P-10 Picture Thread
Post by: Hammer Time on March 10, 2021, 07:37:48 PM
(https://imagizer.imageshack.com/v2/1024x768q90/922/bNY9kJ.jpg)
Title: Re: P-10 Picture Thread
Post by: monty_d_33 on March 10, 2021, 07:42:05 PM
Quote from: KineticAp1 on March 10, 2021, 09:47:50 AM
My current set up on my P10F

(https://uploads.tapatalk-cdn.com/20210310/fca316c34fc32354015ea14a3eb3916b.jpg)


Sent from my iPhone using Tapatalk
Kinetic, what irons are you running?


Sent from my iPhone using Tapatalk
Title: Re: P-10 Picture Thread
Post by: KineticAp1 on March 11, 2021, 11:51:15 AM
Quote from: monty_d_33 on March 10, 2021, 07:42:05 PM
Quote from: KineticAp1 on March 10, 2021, 09:47:50 AM
My current set up on my P10F

(https://uploads.tapatalk-cdn.com/20210310/fca316c34fc32354015ea14a3eb3916b.jpg)


Sent from my iPhone using Tapatalk
Kinetic, what irons are you running?


Front is Dawson #019-512

P-09 front sight .280 tall

Rear is AmeriGLO GLT-507

Glock rear


This is from ATEi who milled the slide




Sent from my iPhone using Tapatalk
Title: Re: P-10 Picture Thread
Post by: Maynard on March 12, 2021, 07:26:58 PM
(https://imagizer.imageshack.com/v2/800x600q90/923/0ekx3G.jpg) (https://imageshack.com/i/pn0ekx3Gj)
Title: Re: P-10 Picture Thread
Post by: cfrock on March 12, 2021, 09:36:38 PM
Just over 10k on this one

(https://i.imgur.com/LU5K9bI.jpg)

(https://i.imgur.com/CBxvzz8.jpg)
Title: Re: P-10 Picture Thread
Post by: Maynard on March 18, 2021, 07:13:45 PM
(https://imagizer.imageshack.com/v2/800x600q90/924/xGr0yr.jpg) (https://imageshack.com/i/poxGr0yrj)
Title: Re: P-10 Picture Thread
Post by: KineticAp1 on March 24, 2021, 06:12:32 PM
(https://uploads.tapatalk-cdn.com/20210324/dc0ab055b4066cdc51f913f905f26284.jpg)


Dropped off my new (to me) P10c slide at Southwest Precision here in Phoenix today to get it milled for an RMR.

Once it’s done I’ll have the CZ set up I’ve wanted from the beginning... C upper with comp on F lower


Sent from my iPhone using Tapatalk
Title: Re: P-10 Picture Thread
Post by: Beef on March 27, 2021, 12:46:06 PM
That comp looks wonderful. Greetings from Phoenix!
Title: Re: P-10 Picture Thread
Post by: KineticAp1 on April 07, 2021, 02:47:40 PM
Quote from: Beef on March 27, 2021, 12:46:06 PM
That comp looks wonderful. Greetings from Phoenix!
Thanks... what part of the valley ?


Also... got my slide back and assembled it for testing before cerakote

(https://uploads.tapatalk-cdn.com/20210407/5dff60864085710e8d21da884bea490e.jpg)


Sent from my iPhone using Tapatalk
Title: Re: P-10 Picture Thread
Post by: Maynard on April 13, 2021, 12:14:36 PM
Primary Machine barrel and guide rod arrived. Range visit commencing...
 
(https://imagizer.imageshack.com/v2/800x600q90/923/qVFbby.jpg) (https://imageshack.com/i/pnqVFbbyj)
(https://imagizer.imageshack.com/v2/800x600q90/922/Oe6jBK.jpg) (https://imageshack.com/i/pmOe6jBKj)
Title: Re: P-10 Picture Thread
Post by: Psyop96 on April 14, 2021, 10:34:15 PM
Recycling some photos of the S and M when ranges were open last year.

(https://uploads.tapatalk-cdn.com/20210415/908dfd624a36fad951246dcefc19c5f4.jpg)


(https://uploads.tapatalk-cdn.com/20210415/6ac1b6c74ee7edee784504b6ba06154f.jpg)

(https://uploads.tapatalk-cdn.com/20210415/2c24dfca68e1fb09175f780a029eb8fa.jpg)

(https://uploads.tapatalk-cdn.com/20210415/af21e4484d09f714f31ff6ec41651c4d.jpg)


Sent from my iPad using Tapatalk
Title: Re: P-10 Picture Thread
Post by: Jeep_Nut on April 24, 2021, 08:57:36 AM
(https://uploads.tapatalk-cdn.com/20210424/5afa024b6c5419d6d7f2dcd6ea0ac954.jpg)


Sent from my iPhone using Tapatalk