The Original CZ Forum

CZ LONG ARMS => CZ BREN => Topic started by: Brenfan on July 31, 2021, 02:47:50 PM

Title: HELP
Post by: Brenfan on July 31, 2021, 02:47:50 PM

Hi guys
I've got one of the earlier 805 Bren PS1 models with the older non flip up sights. I wanna replace them with some new Bren Flip Up Sights that I have.
Problem is it feels like I might strip the nut when I apply pressure to loosen
What do yall recommend?
Hammer down on the torque and hope she breaks loose
Apply Heat and then try?
I wander if CZ added either red or blue locktite to those sights?
Thanx in advance

Title: Re: HELP
Post by: Brenfan on July 31, 2021, 03:34:55 PM

Nevermind guys, I'll just take my Dremel to it, and then take them off with a flat head screw driver.

Title: Re: HELP
Post by: Crawl on July 31, 2021, 03:47:01 PM

I always use a heat gun first. CZ is fond of loctite

Sent from my SM-G986U using Tapatalk

Title: Re: HELP
Post by: Brenfan on July 31, 2021, 04:24:35 PM

Quote from: Crawl on July 31, 2021, 03:47:01 PM

I always use a heat gun first. CZ is fond of loctite

Sent from my SM-G986U using Tapatalk

Aha. I knew they had to be man....
Thank you.