The Original CZ Forum
GENERAL => CZ Gunsmithing => Topic started by: newageroman on February 03, 2022, 12:04:33 PM
-
Its on the SP-01 Open 9 racegun. the one with the threaded barrel I hand fit at the kitchen table for 2.5 hours around midnight one dark rainy evening a in 20..something...
It shot great at first then spun out of time. I tried a few things and a few other things and help from another local builder. Still out of time.
This time I am trying the locktite primer and gobs of high temp 272. I suspect it will shoot 47 rounds or less of major, but we will see. Its been a fun journey either way. Of course I'll first try a few normal minor PF rounds. The funniest part of the whole thing is that the comp is made for a *gasp* Glock... I fixed that part...
-
Holding!!!!
20 minor rounds, then working up to 25 major rounds and yep still timed. I do have a problem though. The rounds are a tad too long and I could only load 2 in the mag before they stuck and rattled. So I will bump it down a tad and wax my mags.
This thing is feels like shooting a 357 automag... with 25 rounds(when they work). The Cmore Dot stayed in the window and I was able to watch the bounce. I forgot what a sweet shooter this thing is. the poor mans checkmate... I love it!
I need a brass magwell next and a slide racker off the right side.
-
How does it lock? Set screws?
-
Filed it flat until it timed correctly, the put locktite on it and it went for a while then spun. local guy tapped one hole and put it on with rockset. spun... I'm betting it will spin again but the priming compound seemed to help the treadlocker some so we will see..