The Original CZ Forum

GENERAL => Cajun Gun Works => Topic started by: sd408 on February 11, 2022, 04:03:17 PM

Title: What parts do I need for full Pro Kit on P07?
Post by: sd408 on February 11, 2022, 04:03:17 PM

I already emailed and texted CGW but was told that they had “no suggestions without examining the firearm” after waiting a month for a response. I just want to know what parts im missing to make this a complete Pro kit. I cant find any info on the self defense kit on the website now. Picture of invoice below. https://imgur.com/a/MDShbAk

Trigger, hammer, but any springs/etc? Person i bought the P07 from ordered the wrong roller bearing so i will be replacing that too. I’m having a pretty unsatisfactory rolling break now, so im hoping these parts replacements will solve the problem. Kit installed now feels nothing like the P01 Pro kit break i have.

(https://imgur.com/a/MDShbAk)

Title: Re: What parts do I need for full Pro Kit on P07?
Post by: tomjbyron on February 12, 2022, 11:18:23 AM

Based on that invoice, you'll probably need an omega sear spring kit to go with the CGW hammer. The short reset kit comes with the reduce power firing pin and firing pin block spring.

https://cajungunworks.com/product/omega-series-sear-spring-kit/ (https://cajungunworks.com/product/omega-series-sear-spring-kit/)

I'm not sure what was included in SPGK79, but you could possibly do a visual comparison to the 15# and 18# hammer spring. If you have yellow, or gold, you are good to go.

CGW is correct, it is hard to make definitive suggestions without visual examination. If you have any of the factory parts on hand, you can compare them to what is installed.