The Original CZ Forum
CZ PISTOL CLUBS => CZ SP-01 and variants => Topic started by: Captdave221 on February 24, 2022, 09:07:45 AM
-
I want to shorten my TS2 mag release and drill, tap, put in a pin so I can use a paddle from a TSO. Trying not to spend $75 or whatever for the TSO release. The Scotsman in me is coming out I guess.
So the question is how hard is the release? Standard drills and tap will work? If it is hardened how to soften then re-harden after the operation is done.
Thanks for any help