The Original CZ Forum
CZ PISTOL CLUBS => Curio and Relic CZs => Topic started by: kruuth on March 03, 2022, 07:22:33 AM
-
Does anybody know where to get these, or better yet, if something else fits? I have two of these with the original black bakelite finish plastic bases, and both have broken. The mag still works, just looks a little off. Is there an aftermarket, or maybe something for another pistol I can slide on there?
-
I did a quick search of various parts houses and didn't find any magazine baseplates for CZ50 or CZ70.
If you can find a tech school with a laser part scanner and a 3D thermoplastic printer, they might be able to fabricate one for you.
-
I have the thermoplastic printer. The problem is that the lip is very thin, and all the materials I've tried don't hold up, hence why I was asking if there was some aftermarket part, or maybe something I could pull off another magazine to use.
-
I went and compared my Vz50 and Vz70 mag base plates with my only other .32 caliber gun... Beretta 1032 Tomcat.
No way that its base plate could be used.
When I purchased my Vz70 years back I ordered another magazine from TripleK.
One seller on eBay has NINE (9) of them but wants $56.50 apiece!!
That might be your best option...unless you want to try using a plastic repair compound to fix the one that you have.
It would be cheaper.
-
I went and compared my Vz50 and Vz70 mag base plates with my only other .32 caliber gun... Beretta 1032 Tomcat.
No way that its base plate could be used.
When I purchased my Vz70 years back I ordered another magazine from TripleK.
One seller on eBay has NINE (9) of them but wants $56.50 apiece!!
That might be your best option...unless you want to try using a plastic repair compound to fix the one that you have.
It would be cheaper.
the Triple K website has the vz 50 and vz 70 mags for $40 each
-
I replaced one several years ago. I think the donor part was off a Walther PP in .32.
Had to cut a small slot on one side for the locking tab on the mag spring.
I’ll go back through my old gun parts orders to try to confirm the part.
-
Update - finally found the order invoice.
I ordered "misc620, PPK Magazine Finger Rest" from Sarco back in 2019. Price was $5.95.
No longer available.
It slid right on, just had to cut a small notch for the end of the mag spring.
I took some pictures but have never broken the code for posting them here.