The Original CZ Forum
GENERAL => CZ Gunsmithing => Topic started by: FluffyTheCat on April 17, 2022, 07:23:19 PM
-
I bought a CZ-75 frame for $60 at an auction. I also have a Kadet 2 conversion unit and my plan is to create a dedicated .22 pistol.
But I need to buy all the parts to properly assemble the frame. I would be grateful were someone to provide me with a list of all the parts needed to assemble this stripped frame.
Thank you
-
the parts section on the CZ-USA webstore used to have the schematic with links to all the component parts.
-
No mention if frame is Pre-B, transitional, B, full size, compact, decocker, etc.
Perhaps this might give a general assistance.
https://cajungunworks.com/cz-75-parts-diagram/
-
Here's one I put together a while back:
Original post: https://czfirearms.us/index.php?topic=101757.msg787328#msg787328
(https://i.postimg.cc/5N9BJ0vt/Parts-Diagram-Narrow.jpg) (https://postimg.cc/Sj527mg0) (https://postimages.org/)
-
or you could buy one of these to get a bunch of parts - https://centerfiresystems.com/product/factory-original-cz-75-d-compact-spare-parts-kit-kit0081
(I bought one a few months ago)
-
where did you get a frame for $60! that sounds like a fun project.
good luck with it!
-
CZ springs galore.
https://bhspringsolutions.com/index.php/product-category/shop-by-department/gun-springs/cz75-springs/