The Original CZ Forum

GENERAL => CZ Gunsmithing => Topic started by: Auslander on June 06, 2022, 01:32:22 PM

Title: VISM Rear Sight tool for CZ75 based weapons
Post by: Auslander on June 06, 2022, 01:32:22 PM

Throwing this out there, but this weekend I borrowed the VISM rear sight tool from a friend to install a LPA adjustable sight on a 75B.  Didn't expect much out of a $60 tool.  I was wrong.  Worked like a champ.

I do not have any experience with "universal-type" sight pushers, only with weapon specific ones for Glock and Sig, but I would recommend the VISM for your kit, particularly for occasional use.

You still need to take reasonable care to properly hone/fit the sight and squaring the slide in the tool, but one heck of a lot easier than drifting with a hammer/punch.  Was able to get the sight centered to .001".   

For rear sight removal, I started with the hammer, mainly because I did not want to damage a borrowed tool.  I don't think it would matter.  I'll be buying one.           

Title: Re: VISM Rear Sight tool for CZ75 based weapons
Post by: M1A4ME on June 07, 2022, 07:48:41 AM

I bought one several years ago.  I've used it to change rear sights on several CZ75 full sized and compact sized pistols.  Used it on the M&P Shields.  Seems like I used it on another pistol but I don't remember which one right now.

No issues so far.

Title: Re: VISM Rear Sight tool for CZ75 based weapons
Post by: eastman on June 12, 2022, 10:05:01 PM

I've also had one for over 5 years. It has always worked well for me.