The Original CZ Forum

GENERAL => CZ Gunsmithing => Topic started by: NeedCZ on September 18, 2022, 11:49:10 AM

Title: CZ82 Decocks when trigger pulled
Post by: NeedCZ on September 18, 2022, 11:49:10 AM

Need some advice on an 82.
When the trigger is pulled partway through, the hammer will decock.  I can carry through with the pull and it will fire as double action.
Oddly this only happens when the gun is held vertically, if it is held sideways, it works fine. I figured that out when trying to film the issue; see the link below
The issue isn't 100% consistent but happens 90+% of the time.

Any ideas/suggestions?

https://imgur.com/7oIR1dr

Title: Re: CZ82 Decocks when trigger pulled
Post by: NeedCZ on September 19, 2022, 03:12:24 PM

Would it make sense to just install a new sear, trigger bar and spring kit?  It has to be one of those right? Replace them all so I don't have to figure it out?

Title: Re: CZ82 Decocks when trigger pulled
Post by: bonj on September 19, 2022, 05:59:19 PM

I figured it would be one of those, but I'm no gunsmith.