The Original CZ Forum

CZ PISTOL CLUBS => Curio and Relic CZs => Topic started by: VolGunSmithing on October 26, 2022, 01:23:45 PM

Title: Searching for source on CZ Vzor70 trigger return spring
Post by: VolGunSmithing on October 26, 2022, 01:23:45 PM

Hello all! Im new to the forum and was looking for a replacement trigger return spring for a Cz Vzor70. Bought my first CZ pistol and of course the spring snaps on me. I assume the gun was heavily shot as it needed a new barrel as well. Lands were nonexistant. Does anyone know of a place that still has them in stock? Everywhere I've looked is out of stock. I've also tried a cz52 spring and a walther ppk spring and couldn't manage to get either to work. Any help would be great as I'm new to these pistols.

Title: Re: Searching for source on CZ Vzor70 trigger return spring
Post by: NeedCZ on October 26, 2022, 02:01:36 PM

Here?
https://www.buymilsurp.com/trigger-30-cz50-cz70-cz50-cz70-czech-pistol-p-7398.html

Title: Re: Searching for source on CZ Vzor70 trigger return spring
Post by: VolGunSmithing on October 26, 2022, 04:45:57 PM

@NeedCZ That's a trigger. I'm looking for the trigger return spring. It's out of stock on buymilsurp.com.  Thanks for searching for me though

Title: Re: Searching for source on CZ Vzor70 trigger return spring
Post by: studenygreg on October 26, 2022, 08:46:21 PM

Probably not much help but for milsurps I usually try to buy 2 or more just to have spare parts.

Sent from my SM-G991U using Tapatalk

Title: Re: Searching for source on CZ Vzor70 trigger return spring
Post by: Palmetto Marsh on October 28, 2022, 06:23:12 AM

From a CZ forum post from 2014 .. I'm not the author



Most of us believe that the CZ50/70 was based off of the Walther PP (PP, PPK, PPKS) series of handguns.  The trigger return spring for the PPK looks really close and if you trimmed off the "U" loop on the bottom, it might be made to fit and work.

Title: Re: Searching for source on CZ Vzor70 trigger return spring
Post by: Hawkeye_90 on March 24, 2023, 11:14:53 AM

I needed a spring and my smith was able to make one.