The Original CZ Forum
CZ PISTOL CLUBS => CZ82 & CZ83 CLUB => Topic started by: Fireftr19 on November 02, 2022, 09:49:41 PM
-
First post here on the forum, and new CZ owner. I recently picked up this CZ 83 in great shape with case, docs and extra mags. I keep hearing about blue finishes and black. Those of you who know, what finish would this be? Thanks for any info, and insight you provide.
https://imgur.com/a/3zo2UkI
-
Welcome ! Looks like the "black" to me.
• The black is a coating, like Cerakote, that's on the surface. It typically creates a matte finish.
• The blue is your typical "gun bluing" that's part of (in) the surface. It typically creates a mirror-like finish with a dark blue to black hue.
This gun is (was) a blued gun...
(https://i.imgur.com/dUwx0hZl.jpg?1)
[Since you already use IMGUR, check out the new photo posting guide.... HERE (https://czfirearms.us/index.php?topic=93202.0).]
-
Thanks for the info on the finish. That an epic fail on that revolver. I'll look at the photo posting info.
-
Thanks for the info on the finish. That an epic fail on that revolver. I'll look at the photo posting info.
This is YOUR thread, my friend.
If you need a place to experiment with photos, then, by all means, feel free to do it here.
(The S&W was simply a photo I already had loaded into IMGUR. So it was easy to get to.)
-
Just a question, why are you considering refinishing your CZ?
if it looked like my LEO, i'd say by all means.
(https://i.imgur.com/g9r1jni.jpg)
(https://i.imgur.com/g9r1jni.jpg)
Save your money for ammo.
Small bullets cost more than big ones right now.
NICE FIND!!
-
I will not be refinishing. This 83 is in very new condition, and needs no work. It has only been to the range two or three times total. My friend barely put any rounds through it before I bought it.
I was just wondering the difference between the black and blue finishes.
-
Here's a shot of another CZ83 factory finish that used to be available.
(https://pbase.com/flydutch/image/173303330/large.jpg)