The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: Conshydane on December 16, 2022, 08:08:35 AM
-
Went to the range last week to finally shoot my new P 10 compact. I’m a half decent shot, but for some reason I couldn’t hit anything with this thing.lol
-
Welcome from Georgia.
Please take a few moments to familiarize yourself with the sticky posts in the 'New Members' Forum and also the 'Important Information' sub-section.
-
It's a gun not a pair of headphones.
-
He meant to type "hit anything".
I find my P10C to be just as accurate as any other polymer gun I've tried. I'm using a reddot and -15% striker spring.
-
Took a new one to the range Wednesday and banged out 50 just to function test before I start upgrades. Didn’t seem too bad for bone stock trigger, no trigger time on the gun and my eyes can’t even focus on the sights. Gun kinda ran itself. If I were keeping the irons I’d give them a tap for sure.
(https://uploads.tapatalk-cdn.com/20221216/2eb14179db931f7e12bb4f0e32620044.jpg)
Top group CZ P10C OR LE, 15 yards, 50 rnds of S&B, 115FMJ.
Bottom is another issue I’m working on, lol.
Sent from my iPad using Tapatalk
-
I found my stock P10c’s accuracy to be good and on par with my SIG P320s & M&Ps
-
My sights were so far off out of the box it didn't come with an accuracy paper. Wasn't until I put a dot on it and used laser ammo to get the dot close to sighted was I able to hit something with it.
-
I just picked one up the other day and the accuracy out of the box is pretty good- better than I can shoot. Had some decent groups at 10yds.
First range trip and getting back into pistol shooting since several years ago the other day and the P10C was acting up all over the place on me. After a few years off, I forgot the need to clean it before I went to the range (HA!), and it made me pay severely. Today, the thing was shooting great, eating everything, good groups, and the trigger warmed up to me in less than 100 rounds shot. Next step thinking about a trigger upgrade such as CGW (who did my P-01) or the Apex trigger kit.
I like Apex because my new love is an HK USP with a super sweet rolling break. The Apex trigger with the Apex disconnector advertises to do some sort of lighter rolling break. I'll search forums for more advice on that.
Will be putting a holosun 507k on mine, just need the plate.
Glad to be back and now have my 3rd CZ!
-
I shot this the other day with a P10c at 30 feet with stock iron sights...
(https://i.imgur.com/o4trWajm.jpg)
I'm 72 and the black portion of the TQ-2 is 3.2 inches in diameter, making the main pattern about 1.4 inches.
-
It’s the most accurate striker pistols I’ve ever shot.
-
I shot this the other day with a P10c at 30 feet with stock iron sights...
(https://i.imgur.com/o4trWajm.jpg)
I'm 72 and the black portion of TQ-2 is 3.2 inches in diameter.
Wobbly Curious what OAL you came up with for the RMR JHP's in your P10. And are they the newer "nuke" version?
-
Wobbly, Curious what OAL you came up with for the RMR JHP's in your P10. And are they the newer "nuke" version?
• For this test 1.040" (my OALs run +/-0.003"), but I usually run 1.060".
• No, I'm still shooting bullets I ordered 3 years ago.
(https://i.imgur.com/V1i6QGom.jpg)
-
Wobbly, Curious what OAL you came up with for the RMR JHP's in your P10. And are they the newer "nuke" version?
• For this test 1.040" (my OALs run +/-0.003"), but I usually run 1.060".
• No, I'm still shooting bullets I ordered 3 years ago.
Thanks for the info. I came up with same results. I run them at the same 1.060 and the gun eats them up.