The Original CZ Forum
GENERAL => Tactics and Competition => Topic started by: newageroman on January 08, 2023, 09:39:47 AM
-
https://www.youtube.com/watch?v=ieaCZgAl2us (https://www.youtube.com/watch?v=ieaCZgAl2us)
Looking for your guys input on this vid ^^^ Here a a couple of interesting points I though were made or should be considered:
I am really excited about shooting limited optics with my SP-01 RG. When the comp spun off I just shoot open minor now that gun would be perfect for limited optics.
They talk about dropping the PF to a safer level and even just flat out removing the Major PF requirement because the open guys will just run it anyway. If the lower the PF to a point that 30SC could run, we could have a whole another caliber race (more 30SC rounds fit in a mag than a 9mm). If CZ would make a steel framed 30SC I would by it. or just make a 30SC drop in barrel. Boom, they would own the game again.
Also, toward the end of the video there is talk bout the slide comp : spectre compensator on the sig.
I've been out of shooting for the past year but that looks cool and I have slide cut ideas already for my CZ.
Lastly I was rolling on the floor when one of the guys said that the S2 basically killed production because it was so advanced with all the mods and still a "production" gun. That led to "if he can have a mag catch in prod why can't I"? My immediate answer was "Because your company don't give a s*!t about entry level racegunners. Too bad so sad go buy a CZ haha!!!". I can't wait to shoot against all the production shooters this year if they change it. As a tinkerer, I understand production but I just can't stand shooting prod guns. I like heavy steel hammer fired guns and I don't see that changing but look forward to the competition.
I mainly go to run my mods. My personal scoring is "YAY - No Jams" (IDC about the targets that much..)
-
I am going to sit back and watch and see what happens before getting excited about building a new gun. For 2023, think I will keep running a P10F in Carry Optics.
-
I think they have made LO a slide cut only div as opposed to a frame mounted dot. That kinda drains my sails but I understand the reasoning.
Have a good season.
-
I'm thinking I'm not alone in this, but really toying with the idea on getting my tso milled for limited optics. Made the mistake of getting it in 9 before I started getting into uspsa. With the prodigy ds and the sig 320 max (with factory magwell in place) in the wild this division does seem to make sense for them.
I intended to take my s2 into co this upcoming season and i will regardless of what happens with limited optics. Limited optics gives the magwell as the primary benefit, i guess. Sao isn't that enticing for me with the s2 SA trigger very close in weight to my tso and the initial DA pull being around 5#.
My eyes aren't getting any younger and getting the front sight in focus with my glasses on gets harder and harder. Dot helps me there quite a bit. I may be done with iron sights at this point.
-
So far almost no takers in Limited Optics for the Ohio South Section match and Area 5
Most of the enthusiasm for this over on Benos seems to come from the C class for life duffers who think this will be the ticket to class wins.
LOL
-
I'm shooting and working the NAZC in prescott in May so I will be able to see how many folks run LO. I don't expect many right away as folks will need to build the rigs and right now that takes time getting anything. I imagine by this time next year it will canibalize a bit of CO and limited divisions.
I just build my CO rig and will stick with CO till I get classified and have a season under my belt. I could easily switch my Accu2 and run limited optics.
Cheers,
Toby
-
I plan to run my SP-01s in LO so I don't have to hammer-down on start.
-
Never say never because crow tastes bad, but at this time I don’t see myself shooting Limited Optics since all my guns fit in CO division just fine.
-
Waiting on a sight...
-
just got paid. anyone know where this sight can be bought?
the new Holosun 507C COMP
https://holosun.com/products/reflex-sight/507/he507comp-gr.html (https://holosun.com/products/reflex-sight/507/he507comp-gr.html)
-
just got paid. anyone know where this sight can be bought?
the new Holosun 507C COMP
https://holosun.com/products/reflex-sight/507/he507comp-gr.html (https://holosun.com/products/reflex-sight/507/he507comp-gr.html)
Kenzies Optics still shows, "Holosun 507COMP Expected to ship late Q2 April/May."
-
Finally was able to get one of these sights from the LGS. I bought my slide used with the plate installed. It dropped right on. there is a slight gap between the sight and the chamber but I really don't care. It if runs I will run it! I expect no issues. I will most likely use the 32 MOA and dot combo for groups and bowling pins/indoor steel. For USPSA I think the 20MOA ring with no dot might be good. More testing soon. Pics and more info here:
https://brassbucket.net/2023/08/08/holosun-507comp-on-an-cz-a-01-slide/
-
I put one on my SP-01 Bull Shadow and used the 20 MOA ring and the dot last Sat. Worked great.
-
sweet. I got sidetracked this weekend. I need a new holster because of my wide gas pedal mod - hoorah.. have a good week.
-
I had ot modify my holster to accommodate the wider optic but it was 2 minutes with a heat gun.
-
Got the cheapest bladetech holster for 75B. Cut 1/8" the end off so the long slide would not bottom out on the holster, allowing the finger guard to slip in. I also trimmed some 45 angles on the corners where the front of the optic hits the holster. Fits good now. Did not have to modify the thumb shelf safety section.
https://rumble.com/v38hq1r-piles-of-6arc-ammo-and-a-new-holster-that-i-will-promptly-destroy.html