The Original CZ Forum
GENERAL => Ammunition, questions, and handloading techniques => Topic started by: Auslander on February 14, 2023, 02:25:31 PM
-
1. Don’t load cartridges when you are sick.
2. Buy a brass squib rod to keep in bag.
This last weekend, I had a local match; however I had been sick as a dog with a sinus infection. I didn’t have enough ammo for the match so on Thursday I rushed through the last 50. The only thing I can figure is my wife walked in and distracted me when I was verifying my charge weight.(I remember her coming in and being in a hurry).
Apparently after verifying the charge, I dumped the powder back in the powder measure and put the now primed but empty case back on the Dillon. Not blaming my wife, but I did build an excellent squib round.
Of course when the round malfunctioned, I dutifully tried to clear and rammed the projectile good and tight. At least it didn’t allow for the next round to chamber.
Thankfully, in my haste I didn’t double charge a case and the squib only blocked the leade. Bad mojo.
I’m glad one of my fellow shooters had a rod.
Don’t rush and don’t load when your attention isn’t focused.
Peace.
Sent from my iPhone using Tapatalk
-
I carry a fiberglass driveway marker that I've cut down for this very purpose.
-
In a pinch a door hinge pin wrapped in duct tape also works good.
-
I carry a fiberglass driveway marker that I've cut down for this very purpose.
Now I know what to do with the remnants of those that delivery drivers have broken beyond usability... Thanks!
-
Yeah but if you ever get a squip in the middle of the barrel, having the brass rod is required. I shattered the fiberglass rod attempting to remove a competitors squib on my squad. They had to find a brass rod.
I replaced my range bag squib rod with a brass one after that event.
Cheers,
Toby
-
After my first (and only) squib, I went out and bought a 1/4" brass rod from Home Depot. I cut it into 12 inch lengths and put them in my range bags. Pretty cheap insurance.
-
I made some brass rods a few years ago when I wanted to slug a barrel and put some in my range bag. I have one for 9 and one for 45. Last fall I had my one and only squib and knocked it out with one of my rods. And hopefully the only time I will have to do that. I can't have a double charge because the powder I use fills the case level with the top with a double charge.
-
I made some brass rods a few years ago when I wanted to slug a barrel and put some in my range bag. I have one for 9 and one for 45. Last fall I had my one and only squib and knocked it out with one of my rods. And hopefully the only time I will have to do that. I can't have a double charge because the powder I use fills the case level with the top with a double charge.
I use BE-86 and other similar mid range powders that would darn near overflow the case should I double charge. I’d like to think I wouldn’t compress a charge, but….
I would have thought I would have caught the empty case as well.
Anyway, I won’t be loading while I’m sick anymore and I’ll stop on the upstroke of the press when my wife walks in!
Sent from my iPhone using Tapatalk
-
I use BE-86 and other similar mid range powders that would darn near overflow the case should I double charge. I’d like to think I wouldn’t compress a charge, but….
I would have thought I would have caught the empty case as well.
Anyway, I won’t be loading while I’m sick anymore and I’ll stop on the upstroke of the press when my wife walks in!
Sent from my iPhone using Tapatalk
Stuff like this happens -- was working on my truck nearly a decade ago now and wife was ready for dinner. Hurrying, I forgot I left a breaker bar on the crankshaft bolt for manually turning the engine... Later started the truck (think it was a new distributor install or maybe just setting timing) and knocked the camshaft bolt loose after doing some damage to hard tranny to radiator lines. Non-interference engine, so got away with just the cost of a new tranny hardline and the time to take everything apart to ensure belt, etc, was all still properly aligned... Sometimes you're darned if you do, darned if you don't.
-
I carry a fiberglass driveway marker that I've cut down for this very purpose.
Cool - I like that idea a lot!! Thanks!