The Original CZ Forum

CZ PISTOL CLUBS => CZ75, 75b, 75 SAO inc the Transitional => Topic started by: Obalu on February 17, 2023, 04:13:02 AM

Title: Magazine brake flat spring
Post by: Obalu on February 17, 2023, 04:13:02 AM
Please could anyone can help me on this ?
I have CZ 75 B,  I want to magazine free fall.
Should it done with CZ TS magazine flat spring or CZ SP-01 magazine flat spring ?

Thank you for everyone for a help.


Sent from my iPhone using Tapatalk
Title: Re: Magazine brake flat spring
Post by: Ron IL on February 17, 2023, 11:51:50 AM
I did my P01 watching a video I found.  Just pull the spring plug out of bottom and take out the spring and brake.  Cut off the tab on the bottom of the brake and bend the brake flat.  Put it back together.  Mag will fall free.  If you want  the brake completely out you will have to drive out a pin.  Or just bend it in place.  That little tab you cut off at the bottom of the brake hooked into the bottom of the spring and that keeps tension on it.  Cutting off the tab lets it relax.
Title: Re: Magazine brake flat spring
Post by: newageroman on February 17, 2023, 12:07:04 PM
the SP-01 should fit it. I put flat mag brakes in all my guns. they are only $7 but the shipping will get you if that's all your ordering. I supposed you could modify the existing brake like he said, and I'm all for modding and "improving" things.
hope that helps. enjoy your new CZ!
Title: Re: Magazine brake flat spring
Post by: Obalu on February 17, 2023, 12:56:55 PM
Thank you for reply.
I order this one ( CZ 75 TS)

https://www.ipscstore.com/en/cz/508-cz-75-ts-magazine-brake.html

I hope it can fit it correctly


Sent from my iPhone using Tapatalk
Title: Re: Magazine brake flat spring
Post by: SI VIS PACEM PARRABELLUM on February 17, 2023, 01:41:57 PM
Quote from: Ron IL on February 17, 2023, 11:51:50 AM
I did my P01 watching a video I found.  Just pull the spring plug out of bottom and take out the spring and brake.  Cut off the tab on the bottom of the brake and bend the brake flat.  Put it back together.  Mag will fall free.  If you want  the brake completely out you will have to drive out a pin.  Or just bend it in place.  That little tab you cut off at the bottom of the brake hooked into the bottom of the spring and that keeps tension on it.  Cutting off the tab lets it relax.
Actually the tab has nothing to do with the mag brake relaxing. If your brake is arched you can straighten it and leave the tab in place. Everyone cuts the tab off because it's a pain in the tail to get back in place sometimes. The reason for the tab is it fits in the slot of the mainspring plug and keeps it from rotating.
Title: Re: Magazine brake flat spring
Post by: tdogg on February 20, 2023, 10:35:19 AM
You can cut off the tab or order this more beefy version that won't get waded up in the frame:  https://czcustom.com/cz-parts-all/mag-releases-brakes/cz-75-ts-mag-brake-stainless.html

https://czfirearms.us/index.php?topic=67390.msg461926#msg461926

Cheers,
Toby