The Original CZ Forum
CZ PISTOL CLUBS => CZF KADET KLUB => Topic started by: Sulpgnir on April 11, 2023, 09:15:20 PM
-
I picked up an used Kadet II at a price that I thought was reasonable. Long story short, I sold my first Kadet II a few years ago, a decision that I came to regret later.
It took about 5-10 minutes of filing to fit the Kadet to the 75B. Today I gave it a light cleaning and took it to the range.
Setup-
Kadet II
CZ 75B frame (converted to SA)
15# hammer spring
CCI Minimags
Modified speed loader (Took about 30 minutes to file down the metal guide?)
It shot 100 flawless rounds. The groupings weren't great, but blame the shooter ;D
It was really a pleasure to shoot, and it's going to be one of the regulars in the range bag.
(https://i.imgur.com/lYylF8l.jpg) (https://i.imgur.com/lYylF8l.jpg)
-
Nice! What speedloader did you start with?
-
You don't need to make a 22 Uplula you can buy one. Example https://www.brownells.com/gear/range-gear/speedloaders-accessories/22uplula-universal-loader/?sku=100013968&utm_medium=cse&utm_source=connexity&utm_campaign=itwine&utm_content=100-013-968&cnxclid=16813144846513502825610090301008005&utm_term=16813144846513502825610090301008005 You can look around for a better price. The range I go to has a bunch I'll ask how much they want for them.
-
Nice! What speedloader did you start with?
I thought I was getting a Raptor Speed Loader, but the eBay seller sent me a cheap Chinese clone ::)
You don't need to make a 22 Uplula you can buy one. You can look around for a better price. The range I go to has a bunch I'll ask how much they want for them.
A few years ago I modified a Maglula before they came out with the 22uplula. Needless to say, I gave the modified Maglula to the buyer when I sold my first Kadet II :'(
(https://i.imgur.com/hTm6ASW.jpg) (https://i.imgur.com/hTm6ASW.jpg)
-
Thanks Sulp! I will have to look.
The uplula charts says that their 22 is not cz kadet compatible.
-
The uplula charts says that their 22 is not cz kadet compatible.
I use the Uplula 22 with my Kadet II - works very well.
-
The uplula charts says that their 22 is not cz kadet compatible.
I use the Uplula 22 with my Kadet II - works very well.
My Uplula 22 works fine with the metal mags but does not work with the SP01 plastic mags.
-
Nice that your 15lb spring works. I run a full house 20# spring for 100% ignition (as its a rf steel challenge gun... 100% ignition is not negotiable and sub 20# was giving me 99-99.5%). Fortunately, a 20# spring doesn't really change the pull weight when you are SAO and have tuned/bought a race hammer