The Original CZ Forum
GENERAL => A Day at the Range! => Topic started by: gwes351 on April 17, 2023, 06:07:24 AM
-
This weekend I had time to extensively shoot my P-07 9mm (urban grey - suppressor ready). I've had it for 2 yrs, but was primarily focused on dialing in the P-10c and P-10s during this time (among other shooting priorities). Up to this weekend I had shot 150 rds through it just for familiarization in it's stock configuration (4.36 in barrel, higher sights) - and it was remarkably accurate, reliable, and enjoyable to shoot. Trigger pulls are DA = 9.0 #s, and SA = 4.0 #s. DA feel was gritty initially until half cock, then not bad. SA was pretty decent from the start. Before this weekend I decided to convert it from suppressor ready to standard configuration: 3.75 in barrel, and std height sights. The barrel is a precision machine blem fluted barrel, and night fision night sights. I used laser bore sight tool to zero the sights. I also added a talon grip.
Shot 200 rds this weekend: various FMJ and some 124gr gold dot jhp - all ran flawlessly. Observations:
- pistol was accurate before, but incredibly so with PM barrel when I did my part - and sights were dead on.
- trigger DA pull has started to smooth a bit, less gritty. SA pull crisp and consistent
- very flat shooting - somewhat surprisingly so (bore axis isn't the lowest - but I can get a very high grip). Fun to shoot with quick follow up shots given the minimal muzzle rise
- ergonomics were good. better now with talon (for me, I needed just a little more to fill my palm)
- a friend shot it too, and was also impressed - especially with it's accuracy
I think I will be shooting it a bit more regularly now - might even carry it once in a while too. One thing I will be looking to change out is the trigger. The upward curl at the end kind of digs into the pad on my trigger finger (especially in DA mode). I think I'll try the CGW "old style" 85 trigger which seems to be less curved at the end (good choice?).
-
Great review.
I'd suggest trying your suppressor-ready barrel w/ the Griffin micro carry comp: https://www.griffinarmament.com/micro-carry-comp-1-2x28/
I find they work well for newer to full caliber handgun shooters... And definitely help where speed is priority over accuracy as well. And vs. running a thread protector at similar weight, this seems to be a no-brainer.
https://www.youtube.com/watch?v=BVAZiZjOMWc
Worth watching this one from here: https://youtu.be/GaFaR22m8Sw?t=372
https://youtu.be/GaFaR22m8Sw