The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: rbschneider1 on September 18, 2023, 10:35:42 AM
-
Anyone know what the height is on this sight? I don't have a micrometer to measure it.
I called CZ-USA CS to get the size of the sight, but they didn't know, the person I talked to said
he never seen a number 12 on them.
-
H11 is 8,5, so H12 should be 9mm.
-
9mm = 0.3543307
Looking at Night Fision's Optic Ready Series, they show over all height of 0.365, with blade height of 0.286. So, 9mm would be pretty close.
Night Fision:
https://www.nightfision.com/product/night-fision-optics-ready-stealth-series-for-cz-usa
CZ-USA CS thought it could be .404" or .395", but could not confirm.
Thanks for reply........
-
H11 is 8,5, so H12 should be 9mm.
I'm not sure I follow the logic. Are you saying that each "H" number represents .5 mm? Mine has a 3 on it and looks to be 3.5 mm in height, fwiw. To continue on that line of reasoning, H11 would be 8 x.5 more than a number 3, or to turn it another way, 11 x .5 would be 5.5, but neither are the case.
Seems like to get an accurate answer to the question how tall is a sight with the number 12 on it, you need to measure a number 12 sight. You don't need a micrometer or caliper for 1/2 mm, a piece of card stock and a sharp pencil will let you mark the height and measure it with a ruler. But it would be a good excuse for buying a caliper, you will find more uses for it in the future. ;D
-
https://www.cz-spare.parts/front-sight-fibre-1mm-gr-h2-5-5mm-w-3mm
H12 - 9,5mm
Other heights https://www.cz-spare.parts/front-sight-with-dot-h1-5-25-mm
CZ sight is measured from bottom to top, not the height above the slide.
3 is 5,75mm, so was factory sight on my P09.