The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: Bambam32 on November 15, 2023, 10:04:38 PM

Title: Curved trigger for P07 with Omega?
Post by: Bambam32 on November 15, 2023, 10:04:38 PM

Just like the title says. I don’t like the straight trigger. Does anyone make a replacement ?  Thanks

Title: Re: Curved trigger for P07 with Omega?
Post by: M1A4ME on November 16, 2023, 05:26:39 AM

The DUTY model (first model P07 had a curved trigger. 

Mine doesn't bite me a bit (P07 DUTY .40 S&W).  For some reason the P09 (not stamped DUTY on the slide because it's the newer version of the plastic framed Omega pistols) in .40 S&W would work my finger over pretty good after a couple/three magazines.

I ordered one of the original triggers for the DUTY model and replaced the straighter double/triple bend version trigger in that P09 and no more trigger finger irritation/pain.

The only thing I had to do was take my pocket knife and scrape the inside of the plastic trigger guard near the rear just before it meets the frame/grip.  The DUTY trigger must be a little longer and the tip would scrape/bind as it moved to the rear.  Only a small amount of plastic has to be removed to allow clearance.

This is my other .40 S&W P07 DUTY, so you can see what the trigger looks like.

(https://i.imgur.com/7p04wQyl.jpg)

Title: Re: Curved trigger for P07 with Omega?
Post by: Bambam32 on November 16, 2023, 07:40:24 AM

Thanks

Title: Re: Curved trigger for P07 with Omega?
Post by: nkresho on November 16, 2023, 12:49:50 PM

I have the cajun one in mine.

https://cajungunworks.com/product/omega-trigger/

I was troubleshooting a fail to reset issue my stock one had.  New trigger did make the difference.

Title: Re: Curved trigger for P07 with Omega?
Post by: M1A4ME on November 16, 2023, 03:55:40 PM

Sorry, forgot to mention I got the older style trigger from CZ USA.  Don't know if they have them in stock or not.

Title: Re: Curved trigger for P07 with Omega?
Post by: ssqman on January 17, 2024, 02:06:46 PM

As an FYI update. I ordered the P07 Duty trigger from CZ USA about 10 days ago. Just got it. Haven't installed it yet. They were in stock for $35.

Title: Re: Curved trigger for P07 with Omega?
Post by: Drewzer17 on January 19, 2024, 05:38:56 AM

The jackal trigger from Rushby industries out of South Africa if you ever get into flat sugars, I would look into this. I’ve heard great things about them I would heavily look into that. They also have other great things for people who have the newer CZPO7 with serrations as the duty with the nations were the last to have the completely flush based magazines.

Please post a link to "Rushby industries"