The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: CZP10C19 on April 13, 2024, 11:22:37 AM

Title: P10c Red dot and factory iron site co-witness
Post by: CZP10C19 on April 13, 2024, 11:22:37 AM

Hi
Which if any holosun optics can be installed (direct to slide or with optic plate) can be used to co-witness with the factory non suppressor height sites?

Title: Re: P10c Red dot and factory iron site co-witness
Post by: Wobbly on April 13, 2024, 07:36:08 PM

Welcome from Georgia, again.

Please take a few moments to familiarize yourself with all the sticky posts in the 'New Members' section. Together with the Help Topics in the 'Important Information' or 'FAQ' sub-section, these include 'how tos' such as 'how to' post pictures on the forum.

As you might have guessed, this is a highly moderated forum. Please read and follow our rules. Thank you in advance.

Title: Re: P10c Red dot and factory iron site co-witness
Post by: Joe L on May 12, 2024, 09:26:45 AM

Quote from: CZP10C19 on April 13, 2024, 11:22:37 AM

Hi
Which if any holosun optics can be installed (direct to slide or with optic plate) can be used to co-witness with the factory non suppressor height sites?

On my P-10S OR with a CZ Custom plate, I use a Holosun 507K X2 sight and can co-witness the factory OR sights, which appear to be same height as non-OR pistols.  I have a P-10C with a CGW cut and a Burris FF3 and it is too tall to co-witness with standard sights.  Maybe the 507K X2 would also work on an OR P-10C. 

Joe