The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: Macgruber81 on May 01, 2024, 01:01:20 AM

Title: P07 ejector play?
Post by: Macgruber81 on May 01, 2024, 01:01:20 AM

Had my P07 for a while now and it’s always gone bang though noticed after shooting it today that there is a tiny bit of ejector play up and down and wondering if that’s normal.   Ejection is mostly just fine with an occasional one going up over the head towards 6 o’clock instead of to right at 4:30.   

Title: Re: P07 ejector play?
Post by: M1A4ME on May 01, 2024, 09:41:22 AM

Mine sort of wiggles if I pull up on it but drops back down when I let it go.  If it was upside down I might find that it would only push upwards, and then drop back when gravity takes over.

Title: Re: P07 ejector play?
Post by: Macgruber81 on May 01, 2024, 05:28:00 PM

Ok that helps thanks

Title: Re: P07 ejector play?
Post by: briang2ad on May 11, 2024, 01:35:34 PM

The play is normal - that is why it is installed with a spring.

Title: Re: P07 ejector play?
Post by: CCWLearner on May 11, 2024, 06:23:21 PM

Quote from: briang2ad on May 11, 2024, 01:35:34 PM

The play is normal - that is why is is installed with a spring.

Exactly this.

Unlike something like a P10 where the ejector is a solid piece of the frame insert, the P-07 ejector is a separate part that is held in place by spring tension.  Pushing it down and rotating it out is actually one of the early steps in disassembling your frame.  It's the second thing you do after removing your hammer spring, if I remember correctly.  After that, you remove your decocker or safety levers.