The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: Asylum9 on October 27, 2024, 05:41:58 PM

Title: Where to buy the adjustable end piece for factory EVO stock?
Post by: Asylum9 on October 27, 2024, 05:41:58 PM
I've been looking for the adjustable shoulder piece for a factory Evo stock for the last year and a half. If they sell it, I've been on the waiting list.
Looks like this https://www.yetiwurks.com/product/cz-scorpion-oem-butt-stock-end-portion-only/ (https://www.yetiwurks.com/product/cz-scorpion-oem-butt-stock-end-portion-only/) used to have one but I put somewhere I wouldn't lose it then obviously lost it.

Don't understand how they could sell firearms yet never keep any replacement parts in stock.

Would be nice if one of the vendors would start reproducing parts so we didn't have to deal or wait on cz
Title: Re: Where to buy the adjustable end piece for factory stock?
Post by: DeltaPapa on October 27, 2024, 06:03:30 PM
You might check with EuropeOutdoor.  When I wanted rubber grips for my 97B they bought them from CZUB and I bought them from EO.  Email this guy and he may be able to help you out. 
zubarevievgen@gmail.com
[urlhttps://europe-outdoor.eu/type/cz-scorpion/page/2/][/url]

Title: Re: Where to buy the adjustable end piece for factory stock?
Post by: briang2ad on October 30, 2024, 02:48:22 PM
The 'buying of Colt' seems to be  more of a merger and it has pulled CZ USA down...
Title: Re: Where to buy the adjustable end piece for factory stock?
Post by: Asylum9 on November 04, 2024, 04:08:14 PM
I mean they weren't great at keeping parts in stock before colt but it's definitely a lot worse after. The most basic parts are always out of stock and have been for some time.

Its a little concerning owning a firearm and not be able to order replacement parts from its manufacturer.
Title: Re: Where to buy the adjustable end piece for factory EVO stock?
Post by: Wobbly on November 05, 2024, 08:48:35 AM
Don't understand how they could sell firearms yet never keep any replacement parts in stock.


Maybe the largest European war in 80 years is going on ?

Maybe NATO countries that border Russia are re-arming faster than any time since WW II ?
Title: Re: Where to buy the adjustable end piece for factory EVO stock?
Post by: MeatAxe on November 05, 2024, 02:36:10 PM
I mean they weren't great at keeping parts in stock before colt but it's definitely a lot worse after. The most basic parts are always out of stock and have been for some time.

Its a little concerning owning a firearm and not be able to order replacement parts from its manufacturer.
Don't understand how they could sell firearms yet never keep any replacement parts in stock.


Maybe the largest European war in 80 years is going on ?

Maybe NATO countries that border Russia are re-arming faster than any time since WW II ?


Send the Ukes Colt-cz M4s. There are plenty of those available, that would benefit US interests. We’ll take the Brens, thank you very much…
Title: Re: Where to buy the adjustable end piece for factory EVO stock?
Post by: Asylum9 on November 06, 2024, 07:16:23 PM
Don't understand how they could sell firearms yet never keep any replacement parts in stock.


Maybe the largest European war in 80 years is going on ?

Maybe NATO countries that border Russia are re-arming faster than any time since WW II ?
I would normally agree but CZ didn't have a whole lot of parts stocked since they released the scorpion evo. I think I waited almost 2 years for a warranty replacement lower.
Also iirc the part I'm looking for and most cz stocks are now made here in the USA for 922r reasons.
Title: Re: Where to buy the adjustable end piece for factory EVO stock?
Post by: j-vtol on February 21, 2025, 06:15:35 PM
While the subject of butt pads has been brought up, does anyone make an original A1 style butt pad piece compliant for SBRs?? I like the aesthetics of the original even if it might be less comfortable.

(https://i.imgur.com/bHNspUB.png)
Title: Re: Where to buy the adjustable end piece for factory EVO stock?
Post by: Asylum9 on February 25, 2025, 04:23:31 PM
That's pretty much what I've been looking for for the last 2 years.
I've come across complete stocks for $175+ on the marketplace. Might be able to 3d print one.
Title: Re: Where to buy the adjustable end piece for factory EVO stock?
Post by: AZ_CZ on February 26, 2025, 11:13:37 AM
That part has always seemed like a weak spot: thin, plastic, moving. What/How did it fail?
Title: Re: Where to buy the adjustable end piece for factory EVO stock?
Post by: j-vtol on February 26, 2025, 09:35:33 PM
That's pretty much what I've been looking for for the last 2 years.
I've come across complete stocks for $175+ on the marketplace. Might be able to 3d print one.
I contacted CZUSA and asked them when that style will be available. ;D  Might get a generic response.
Title: Re: Where to buy the adjustable end piece for factory EVO stock?
Post by: Asylum9 on February 27, 2025, 09:43:20 PM
Mine didn't break. I bought a complete stock when I first got my evo & took the end piece off to install a pistol brace (tail hook). I either hid the end piece or gave it to someone until my sbr stamp came back. I haven't been able to find it since