The Original CZ Forum

CZ PISTOL CLUBS => CZ CLONE CLUB => Topic started by: ARtexas on December 21, 2024, 01:07:46 PM

Title: Jericho 941 F Safety Lever Plunger and Spring
Post by: ARtexas on December 21, 2024, 01:07:46 PM
Guess what I lost when I took my Jericho 941 F apart?   :-[

Does anyone know where I can source a replacement Safety Lever Plunger and Spring for my IWI Jericho 941 F?  Or, what other manufacturers might have compatible versions?

(https://i.imgur.com/eK4AbaL.jpg)

(https://i.imgur.com/rk6xtkO.jpg)


[Mods resized images]
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: Born2vette on December 21, 2024, 02:26:02 PM
My understanding is the some Tanfoglio small frame parts are interchangeable.

Found this (not mine).  Could contact seller for more info/dimensions?

https://www.ebay.com/itm/176449881272?_skw=tanfoglio+safety+plunger&itmmeta=01JFNAS8CN44V0KEJFHEFZDGM0&hash=item29153b84b8:g:H~IAAOSwl8xmghLn&itmprp=enc%3AAQAJAAAA8HoV3kP08IDx%2BKZ9MfhVJKko9Ni8DbsYflkw3JXr%2FxuJIirWTH1KiHVnM4z7DdhOUaWqxLnx9z%2FqaTkw8HvIHt5rjdxkjjzgz6b8U2e8LzglGCIpiZK58j4U1REJ1QgzWpENHOKQd5G3fHJaOPvKSEPUJglRZC6SYhxs%2BeyhA9wD9kmOJ4mifqrTVmuHZIB9rNK9vnkjS19yEWEaLkxIQe7zHdPft%2Ffhbk69Gm1YPHGX9Dl6htYpOzZQkTDhfBGc6QshQwkwmJ14EZti07VuqNeqmddR8y9HFH9AgBevU9A807IuFRBcvHbrJfU2hTPbkQ%3D%3D%7Ctkp%3ABk9SR7SG5ar9ZA
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: ARtexas on December 21, 2024, 02:30:43 PM
Awesome lead, thank you!  I'll reach out.
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: Gunnerdad80 on December 21, 2024, 02:37:40 PM
I just sent you a private message with that same eBay item. Yes it should work.
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: ARtexas on December 21, 2024, 03:00:59 PM
Thank you!  I've placed an offer on the listing!
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: ARtexas on December 21, 2024, 03:03:43 PM
And... I just purchased it!  Thank you @Born2vette and @Gunnerdad80 for the help!
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: Gunnerdad80 on December 21, 2024, 03:04:23 PM
Quote from: ARtexas on December 21, 2024, 03:00:59 PM
Thank you!  I've placed an offer on the listing!

Good deal! They are a PITA to find. I’ve made them out of thin stainless steel washers before but that’s also kind of a pain.
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: mikebaker1129 on January 18, 2025, 02:38:36 PM
I am looking for both of these same parts.
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: Gunnerdad80 on January 18, 2025, 11:01:23 PM
Try eBay. Use search words like IMI, IWI, Jericho, Tanfoglio. See whatcha come up with.

A little trick you can try next time you have to take a gun apart that has this style safety lever with detent and spring, drip a couple drops of thick oil, like motor or gear oil, in behind that safety lever before you push it out. The oil might help it stick to the safety lever long enough to get a finger on it as you push it out. Or you can push the safety lever out just far enough to slip a strip of tape between the frame and the safety lever to tape the detent and spring down so it doesn’t fly out. Then push it the rest of the way out.
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: mikebaker1129 on January 19, 2025, 05:48:12 PM
Gunnerdad, thanks for the tip.
My pistol was missing several parts when I purchased it s a project for $125.
Title: Re: Jericho 941 F Safety Lever Plunger and Spring
Post by: Gunnerdad80 on January 19, 2025, 07:49:10 PM
Oh cool. I like a good project.