The Original CZ Forum
CZ PISTOL CLUBS => CZ40B/40P => Topic started by: red442joe on January 23, 2025, 09:07:58 AM
-
Just wanted to share.
(Well, Ima hafta figure out what I gotta do to be able to attach pics...)
I'll be back...
Joe
[Mods edited language]
-
A 9mm 40B? Wouldn't that be a 9B? And Why?
Cheers,
Toby
-
A 9mm 40B? Wouldn't that be a 9B? And Why?
Cheers,
Toby
I’m wondering HOW? Did someone actually make a 9mm barrel for the 40B slide?
-
Yes. I did.
Joe
-
There always seemed to be interest in 9mm versions.
I, too, wanted one so decided to make one.
Unfortunately, when I tried to make a profile/account to post pics, using the site recommended, I managed to mess up that.
Don't tap the "start here" button
..that's for a scam subscription site...
Joe
[Mods edited language]
-
When I figure out posting pics, I'll share.
Joe
-
The quickest and easiest way to post picture is to load the Tapatalk app on your phone. Using it for free limits you to ONE (1) picture per post. Pay for the VIP and you can upload multiple photos per post.
Also be sure to read the STICKY about the requirements for photo size before you post any.
https://czfirearms.us/index.php?topic=84632.0 (https://czfirearms.us/index.php?topic=84632.0)
-
Does this work...https://postimg.cc/gallery/473B7mM
Joe
-
Seems to work...
Mebbe someone can insert the images...
Joe
-
Here you go:
(https://i.postimg.cc/DwSmbwyf/20220319-121616.jpg) (https://postimages.org/)
(https://i.postimg.cc/qv4jkWkG/20220319-121658.jpg) (https://postimages.org/)
(https://i.postimg.cc/XYSrM0ks/Screenshot-20220411-194535-Gallery.jpg) (https://postimages.org/)
Looks good. I was wondering how you got a 40B barrel in 9mm. You didn't, you swapped a 75B upper on it.
Cheers,
Toby
-
First...Thank you so much for inserting the pics!
B; Look again...the bottom two pics show the 9mm barrels in the 40B, and RAMI 40.
III-Have you ever tried a 75 slide on a 40B?
4th...I know you can get a RAMI in 9mm, but everywhere barrels are SOLD OUT, un-available, no gots...
Joe
-
Mebbe this will help.
Lets try a different link from the image hosting site.
(https://i.postimg.cc/htptn20v/20230102-155007.jpg)
Joe
-
Hey! Wouldja lookit that!
It worked!
Joe
-
First...Thank you so much for inserting the pics!
B; Look again...the bottom two pics show the 9mm barrels in the 40B, and RAMI 40.
III-Have you ever tried a 75 slide on a 40B?
4th...I know you can get a RAMI in 9mm, but everywhere barrels are SOLD OUT, un-available, no gots...
Joe
So where did you get a 9mm barrel for the 40B?
I have fitted a 40S&W upper on my SP01 so it can shoot both 9 and 40. I haven't fit a 75B slide on a 40B but it would probably work just fine.
I'm confused, is your Rami a 40 S&W and you fit a 9mm barrel? Why is the barrel so long?
Cheers,
Toby
-
It looks like the slide is shorter in the last picture, like its from a compact.
Bill
-
The 75B SA slide required mods, and hybrid parts, to work. Shoots like a 75B with an alloy frame.
I found p-09, and p-07 barrels at Numrich for the 40B, and RAMI.
They required some mods, but the key is all the barrels are the same OD. Yes they are a little long...
I also made the grips.
Joe
-
Hmmm, I seem to be having trouble...
-
NM, dint see we on page 2...
Joe
-
i want to convert my 40B to 9mm to.
-
i want to convert my 40B to 9mm to.
The easiest way would probably be to fit s p09 barrel. It is a little long, but could be shortened or threaded. All the fitting is in the hood to slide area. Some welding and filing.
My barrel was mig welded, and those areas are softer than the barrel...some peening has occurred. I plan to redo that barrel, addressing the hardness in the modified areas.
A whole 75B slide can be fitted, but will require removing over half an inch from the recoil spring guide tunnel, and a hybrid guide rod. I also drilled a guide rod hole in the slide. Fun fact! CZ slides appear to be tool steel hard. Barrels too! No wonder they wear so well. Also, the barrels are parallel to the rails when unlocked.
Joe