The Original CZ Forum

GENERAL => Cajun Gun Works => Topic started by: cladd on March 11, 2025, 10:10:19 AM

Title: CZ TS2 Cajun Gunworks Tactical Sport Hammer Kit
Post by: cladd on March 11, 2025, 10:10:19 AM

I recently purchased a CZ TS2 and find it to be a great pistol.  I knew the trigger pull weight was going to be very light and found mine to be set at 1 pound 10 ounces.  My use will be range only no competition other than maybe local bowling pin matches.  My personal preference is to have a pull weight around 2 1/2 pounds versus the current 1lb 10 oz.  I contacted Cajun Gunworks and they have a "Tactical Sport Hammer Kit" that is advertised to increase the pull weight to 2 1/2 pounds.  My question is, has anyone tried this kit on their TS2 and or would appreciate thoughts on this installation.

Thanks much!

Title: Re: CZ TS2 Cajun Gunworks Tactical Sport Hammer Kit
Post by: tdogg on March 11, 2025, 11:58:57 AM

I have that hammer on both my TSO's.  It does increase the trigger pull and does make it more crisp but you are not going to get a 2.5 lb trigger.  The hammer kit does increase the actuation wall before break which is nice to have on the short light TS trigger pull.  Chronicled here:  https://czfirearms.us/index.php?topic=115687.msg901454#msg901454

If you really want to increase the trigger pull weight to 2.5 lb you should get a heavy sear spring.  They are cheaper than the hammer kit but it will have a more pronounced effect on the trigger pull weight than the hammer kit.  Heavy Sear spring thread: https://czfirearms.us/index.php?topic=120086.0

Do both and I think you will be happy.

Cheers,
Toby