The Original CZ Forum

GENERAL => General Firearms Discussion => Topic started by: lewmed on April 16, 2025, 12:15:23 AM

Title: Rugged Obsidian-9 barrel spacer
Post by: lewmed on April 16, 2025, 12:15:23 AM

 Does anyone have the measurements on a Obsidian 9 barrel spacer. I've checked all the shops that sell suppressors and they are on back order until September 2025. I'll just make one if I can find the measurements.
Thanks
LewMed

Title: Re: Rugged Obsidian-9 barrel spacer
Post by: macktheknife on April 16, 2025, 01:02:45 PM

By barrel spacer do you mean the sleeve that replaces the spring ?

Title: Re: Rugged Obsidian-9 barrel spacer
Post by: lewmed on April 16, 2025, 07:39:40 PM

 Yes I'm looking for the part needed to replace the spring for use on a fixed barrel rifle.

Title: Re: Rugged Obsidian-9 barrel spacer
Post by: Born2vette on April 16, 2025, 08:10:48 PM

I have an Obsidian 9 and the thread size is 1.125x28 thread. SilencerCo Omega, Huxwrx RAD, and KVP MACH 3 series suppressors all use a 1.125x28 thread pattern so a direct mount such as these will work. Just pick the correct thread for your threaded barrel

https://www.silencershop.com/yhm-hub-direct-thread-mount.html

https://www.silencershop.com/rugged-universal-direct-thread-mount.html

Rugged seems to have a variety in stock as well

https://ruggedsuppressors.com/product/fixed-mount/

Title: Re: Rugged Obsidian-9 barrel spacer
Post by: macktheknife on April 17, 2025, 09:22:19 AM

I have an Obsidian-45, according to rugged the parts are interchangeable between the 9 and 45 cans. Here's the dimensions:
Length- 1.237
OD- .941
ID- .801
there are 7 equally spaced slots around the body they measure .973 long x .262 wide

Title: Re: Rugged Obsidian-9 barrel spacer
Post by: lewmed on April 17, 2025, 10:28:49 AM

 Thank you that is what I need to make my own spacer.