The Original CZ Forum

ARCHIVES => CZF ARCHIVES II => CZ Pics => Topic started by: Stuart on April 17, 2007, 09:03:34 PM

Title: Post your SP01
Post by: Stuart on April 17, 2007, 09:03:34 PM: Here is my SP01

Use for USPSA Production.

Action job by Matt Mink
CZ Hammer
CZ competition rear sight, plain black front sight
CZ ext safeties
CZ aluminum grips
Steve Bedair full-length stainless guide rod

(http://img.photobucket.com/albums/v483/eerw/My%20stuff/11DSC_0047.jpg)

(http://img.photobucket.com/albums/v483/eerw/My%20stuff/11DSC_0029.jpg)
Title: Post your SP01
Post by: William Chase on April 19, 2007, 01:13:41 PM: Showing some wear, but in a beautiful kinda way!

Nice!
Bill
Title: Post your SP01
Post by: Mike Russell on May 12, 2007, 07:59:57 PM: Old post, I know, but I finally took a pic of my SP01 to post since I did some mods.

--Competition rear and 1.5mm front FO site
--aluminum thin grips
--action job by me (including removal of FPB)
--polished feed ramp and breach face

(http://hometown.aol.com/racincajn/images/mike%20001.jpg)
Title: Post your SP01
Post by: robfrombelize on November 14, 2007, 04:13:36 PM: Does this gun have the black polycoat finish? I am just asking because I noticed a lot of wear on the finish. Is this normal?
Title: Post your SP01
Post by: Stuart on November 14, 2007, 04:38:15 PM: yeah...started out with the polycoat finish..
the finish is pretty tough..but this is an '05 production gun..and I use it in a BladeTech kydex holster.

I do a fair amount of dryfire practice and shoot pretty regularly USPSA and IDPA matches.
Title: Post your SP01
Post by: robfrombelize on November 15, 2007, 07:02:49 AM: I thought that might be the reason. But was not sure. Really nice gun though. I wish I had the chance to shoot that often to the poiint that I wear off the finish on my gun! I used to shoot a hi power, and then went over to a sig p226. Big mistake on my part. The sig seems to be more spot in in terms of accuracy when taking a steady aimed shot, but my small hands don't really fit well with the sig as opposede to the browning. In practical shooting matches, this really hurts me. In Belize, Brownings are no longer availabe, but CZ's are. I am thinking about trying out the sp-01 custom. With duty and taxes, this gun runs about US$2000 more or less down here and takes three months to order. I wish it came in stainless though. Anyway, I think I'm sold on this gun.
Title: Re: Post your SP01
Post by: drew5337 on August 28, 2008, 06:51:41 PM: Wow, $2,000 for a SP01. A plain jane SP01 here is about $550. I don't know about the Custom model. Good post, I'm getting into USPSA and a CZ SP01 is just what I'm planning on shooting.
Title: Re: Post your SP01
Post by: Tactical Madman on January 21, 2009, 05:48:10 PM: Here's my SP-01 tactical 9mm. ;D

(http://94.100.116.164/469000001-469050000/469048001-469048100/469048070_6_br2t.jpeg)

(http://94.100.113.102/469000001-469050000/469048001-469048100/469048075_6_bapv.jpeg)
Title: Re: Post your SP01
Post by: SID HAL on January 30, 2009, 10:15:02 PM: Here's one with the tactical block - well made accessory by CZ.

(http://i137.photobucket.com/albums/q215/SIDHAL/CZ-SP01TacticalBlock.jpg)
Title: Re: Post your SP01
Post by: Alex on January 31, 2009, 08:09:35 AM: haha, nice one. Thats the first non-promotional/commercial photo i see of the tac block.
Title: Re: Post your SP01
Post by: SID HAL on January 31, 2009, 08:00:36 PM: Added LAM

(http://i137.photobucket.com/albums/q215/SIDHAL/SP01_Tblock_LAM.jpg)

SP01 - only with LAM

(http://i137.photobucket.com/albums/q215/SIDHAL/SP01LAM3.jpg)
Title: Re: Post your SP01
Post by: SID HAL on January 31, 2009, 08:10:32 PM: Angle view of SP01 with CZ tactical block and M6, worse than getting poked in the eye with a sharp stick.

(http://i137.photobucket.com/albums/q215/SIDHAL/SideTblockLAM.jpg)