The Original CZ Forum
CZ PISTOL CLUBS => CZ75, 75b, 75 SAO inc the Transitional => Topic started by: armoredman on September 25, 2010, 10:09:43 AM
-
Only one I ever used was the old Galco Hi-Jak, out of print for YEARS, but a good rig. Galco does still make some holsters for the CZ 75B, http://www.usgalco.com/HolsterPG1.asp. (http://www.usgalco.com/HolsterPG1.asp.)
High Noon, http://highnoonholsters.com/, (http://highnoonholsters.com/) carries a lot of CZ75 rigs, as well as custom leather from Hazel and HBE.
For the buget minded, Uncle Mikes carries a wide range of rigs, and anything listed as a size 5 will fit the CZ75b and relatives. http://www.uncle-mikes.com/um_cat_holsters.html (http://www.uncle-mikes.com/um_cat_holsters.html)
-
I found a bunch of good options on eBay. I just paid 20 bucks for one with free shipping made for the CZ. Amazon has some but only the molded bits, not nylon or anything. :)
-
I use a Bianchi Black Widow. It has a thumb break, but will allow cocked-and-locked carry. The only thing is, it is an open muzzle type holster, and the muzzle end of the pistol sometimes rubs against the brass grommet of my jeans.
-
I use a Blackhawk SERPA III holster. It's the model for the Betetta 92FS. Adjust the grip screw appropriately and your set!
-
Try lion-holsters.com dont know what the postage would be, but they are hand made and tailored to CZ.
-
For concealed I use an IWB HBE com II. Open a Kydex bladetech.
-
Ross makes a nice one.
http://www.rossleather.com/Concealment_Holsters-Pancake_Style_Holsters/c8_13/index.html (http://www.rossleather.com/Concealment_Holsters-Pancake_Style_Holsters/c8_13/index.html)
Plus, I have a Fobus made for a Glock 22, too tight for my Glock, but my 75B fits fine.
-
Is there a holster that won't rub the nickel finish off my 75B?
-
Just got this in the mail today.
http://www.midwayusa.com/viewProduct/?productNumber=382566 (http://www.midwayusa.com/viewProduct/?productNumber=382566)
-
Just got this in the mail today.
http://www.midwayusa.com/viewProduct/?productNumber=382566 (http://www.midwayusa.com/viewProduct/?productNumber=382566)
That's the same holster I have for my stainless 75B.
(http://i928.photobucket.com/albums/ad125/Eric_D_0424/CZholster.jpg)
-
OWB: I started with an Uncle Mike's that actually fit well. You wouldn't believe how many guns will fit that size. I still loan it out to new shooters who need one.
Also for economy--Fobus makes a plastic holster that fits okay but has a major problem that's fixable. Retention is not adjustable. The top rivet, by the trigger guard, can be drilled out and replaced with a small machine screw and self-locking nut. Put an o-ring or very short spring in between the two halves and the holster retention adjusts fine.
I like the Kydex Bladetech: versatile for carry or competition. A friend deepened the slot over the slide by about 3/4"-you can't tell he did it. The retention still works perfectly and the draw is very fast.
Floyd @ Eric: I like the looks of the Safariland.
-
It's a good holster, fits the 75B like a glove. My next Safariland is going tho be the one pictured below. I've got one of the Uncle Mikes nylon holsters too, it fits the CZ okay, but fits my Para much better.
(http://www.safariland.com/DutyGear/images/catalog/5181_l.jpg)
-
I use a Milt Sparks Summer Special 2, http://www.miltsparks.com/. (http://www.miltsparks.com/.) It was and is still my first on only IWB holster. It may no be the best, but it is what I use and it fits my body well. It can poke at me while driving certain cars, something about the seat shape. But luckily I ride a motorcycle 80% of the time. I am considering the Crossbreed Super Tuck down the road.
-
It's a good holster, fits the 75B like a glove. My next Safariland is going tho be the one pictured below. I've got one of the Uncle Mikes nylon holsters too, it fits the CZ okay, but fits my Para much better.
(http://www.safariland.com/DutyGear/images/catalog/5181_l.jpg)
Hey Eric which safariland holster is this? thanks!
-
The Fobus holster made for the CZ75 never fit my CZ75B, it was too tight in the muzzle area it wouldn't even fit past the trigger guard. I just had a brilliant idea about an hour ago and I decided to make a trigger guard holster out of it. Took the ol' Dremel to it and this is what I ended up with. Perfect for "Mexican carry", any position, any angle and can easily adjust on the move! Comfortable too! ;D (sorry for phone pictures)
(http://img828.imageshack.us/img828/7145/1216001519.jpg)
The retention on this holster is from two indents that snap around the trigger guard and hold it pretty tight, when drawing it automatically releases without even noticing.
(http://img214.imageshack.us/img214/3765/1216001543.jpg)
(http://img694.imageshack.us/img694/9795/1216001608.jpg)
^ Not an easy picture to take by yourself! ^
-Jeremy
-
I know the Bianchi Model 82 with the retention lock fits my CZ 75B in .40S&W. It is a snug fit but 2 min with a dremel and it fits perfect now.
-
The Fobus plastic roto-holster sold as fitting the 75B can be made to fit pretty well.
Drill out the top rivet by the retention/trigger guard area. Install a small machine screw and self-locking nut with a small spring (some have used an O-ring) between the two halves. Holster your gun and adjust the screw until the retention is to your liking. The gun will smoothly holster and un-holster with a modest/safe retention.\
There are better holsters, but this one will work.
-
Falco makes a number of holsters to fit a CZ-75. Follow this LINK. (http://www.falcoholsters.com/sheriff-smith/holsters-availability.html)
I bought one and am satisfied with the fit, quality, price and speed of shipping.
-
OK, here's a twist: my CZ75B is fitted with target sights, front and rear. The front sight is appreciably taller than the factory CZ combat sights.
So... what holster will fit the sights and still hold the pistol properly?
-
Bianchi Accumold 7001 size #14 is a perfect fit for my 1911 and my CZ-75B. The 7001 is a thumb/snap nylon molded holster offered at a very reasonable price.
http://www.bianchi-intl.com/product/Prod.php?TxtModelID=7001 (http://www.bianchi-intl.com/product/Prod.php?TxtModelID=7001)
(http://i86.photobucket.com/albums/k95/97thSignalman/accumold7001.jpg)
-
Jeremy what a great idea! I've seen a similar thing being sold on the internet. Thought it made sense, especially for striker fired guns. I've got a bunch of Fobus holsters I don't use any longer. I'm going to mod them in the way you did and give them a new life.
Nothing fits better for IWB carry than no holster. You hit a home run with this idea.
Out
West
-
Actually, quite a few 1911 holsters will fit 75B just fine ;)
-
Actually, quite a few 1911 holsters will fit 75B just fine ;)
You are right about that. The Accumold that I purchased for my 1911 is a perfect fit for my CZ-75.
-
Always glad to help :D
-
Got one of these for every handgun I own.
http://www.blade-tech.com/Belt-Holster-w-TEK-LOK-pr-910.html (http://www.blade-tech.com/Belt-Holster-w-TEK-LOK-pr-910.html)
-
I LOVE my Falco brand holsters! They fit great with my black Beltman gun belt.
(http://i1107.photobucket.com/albums/h399/FunkyPertwee/100_2540.jpg)
(http://i1107.photobucket.com/albums/h399/FunkyPertwee/100_2541.jpg)
-
I broke down and bought a Fobus BR-2 paddle for my 75B 9mm today. It says it fits the .40 on the box, but it fits my 9mm nice and snug, not freaky tight. It's also what was on the shelf at J&G so I didn't get to compare it to the 9mm holster.
We'll see how well it works at the USPSA match this Sunday.
Hopefully better than my MTAC.
-
I got myself a Safariland 568-51-411 which lists the 75b as one of the guns for it and guess what it fits sweet
-
I heard about an ITAC-CZ75 but have seen one yet. Anybody tried this paddle holster?
-
I found a Fobus HK1 fits very well.
-
I heard about an ITAC-CZ75 but have seen one yet. Anybody tried this paddle holster?
I have the ITAC holster on order, they actually have one with a detachable mag pouch but it's not on their website (call them). The guy I spoke to their had a lot of good things to say about the 75B and I've seen some video reviews of their holsters so I'll give a report when I get it.
By the way, the people at ITAC Defense were a pleasure to work with.
Sent from my iPhone using Tapatalk
-
don hume jit slide no. 53-145. fits good and works on alot of other guns
-
I found a Fobus HK1 fits very well.
So does the Fobus RU97 and Fobus Evolution HK2, which I prefer to the normal one Fobus supposedly designed for the CZ75. There are probably a few others in the Fobus line that will also work.
-
I tried the Blackhawk Serpa Level 2 Sportster right hand gun metal gray for the Beretta 92/92 (not Elite, Brigadier or M9A1) Size 04 - model number 413504BK-R and it fit perfectly. $24.06 with free delivery at Amazon.
http://www.amazon.com/gp/product/B0027JAQKQ/ref=oh_o02_s00_i00_details
-
I have a "GARRETT" leather lined Kadex holster that is made for a 1911 that I use at USPSA matches for my Dan Wesson stainless PM7 .45. My nickel 75B works in it very well also and the leather lining will protect the finish. The "Garrett" has adjusting screws on it so you can set the "tightness" and also the cant. Very cool holster and a great company (man and wife) to deal with. A bit pricey, but worth it in my opinion. Also check out their "Pez dispenser" mag holder, I don't remember its real name, but it holds 6 mags comfortably and they're always in the same place-one after another- so your hand is always grabbing them in the same place. Makes mag changes during a match easier in my opinion than having single or double mag carriers all over the place. It looks a bit weird, but works GREAT!
-
The Fobus plastic roto-holster sold as fitting the 75B can be made to fit pretty well.
Drill out the top rivet by the retention/trigger guard area. Install a small machine screw and self-locking nut with a small spring (some have used an O-ring) between the two halves. Holster your gun and adjust the screw until the retention is to your liking. The gun will smoothly holster and un-holster with a modest/safe retention.\
There are better holsters, but this one will work.
I was given this holster, and it was definitely too tight without modification. What I did was very similar to what is described above. Total investment, a little time and $0.85 for the bolt from Lowes. I tried a washer as a spacer, but it made it too loose. I ended up using a couple pieces of thick paper or thin cardboard. Hopefully the pictures are self explanatory with the description above. (http://img822.imageshack.us/img822/1521/holsterv.jpg) (http://imageshack.us/photo/my-images/822/holsterv.jpg/)
-
I picked up a new holster from a company called CrossFire. The model is called the Traverse, and it's a soft pancake style with two belt loops. Made in USA, and it's got an elastic retainer strap that has a tab on it, making it easy and quick to pull out of the way on the draw. The holster is very well made, carries well, and I like it.
-
I have an itac holster for mine absolutly love it 41.00 from itac :) :)
-
Triple K makes a number of leather holsters that fit the CZ75. I usually get them from www.cowboyneeds.com .
I recently bought this one http://www.cowboyneeds.com/440.html for my CZ75B .40 cal and I like it. It is a good fit for the pistol and distributes the weight well.
-
Got this off eBay. I have worn it every day since. I've had it around 10 days. As of now I am 100% happy with it. I highly recommend it. $38.00
(http://i179.photobucket.com/albums/w285/towboat_er/2012-08-16_14-40-35_HDR.jpg)
(http://i179.photobucket.com/albums/w285/towboat_er/20120816_144052.jpg)
http://www.ebay.com/itm/280874414611
-
The Fobus plastic roto-holster sold as fitting the 75B can be made to fit pretty well.
Drill out the top rivet by the retention/trigger guard area. Install a small machine screw and self-locking nut with a small spring (some have used an O-ring) between the two halves. Holster your gun and adjust the screw until the retention is to your liking. The gun will smoothly holster and un-holster with a modest/safe retention.\
There are better holsters, but this one will work.
I was given this holster, and it was definitely too tight without modification. What I did was very similar to what is described above. Total investment, a little time and $0.85 for the bolt from Lowes. I tried a washer as a spacer, but it made it too loose. I ended up using a couple pieces of thick paper or thin cardboard. Hopefully the pictures are self explanatory with the description above. (http://img822.imageshack.us/img822/1521/holsterv.jpg) (http://imageshack.us/photo/my-images/822/holsterv.jpg/)
Do either of you know if this holster model is CZ75BH (standard belt holster), CZ75RB (roto-style belt holster), or CZ75RB214 (made for 2-1/4" belts) ?
These are all belt holsters that are represented on the Fobus website as being designed for the CZ75B - 9MM. I am looking for a belt holster for the range. No CC in IL so I am not really worried about visibilty, compactness, etc... just want a nicely priced (cheap?) belt holster. I have a ProTech that fits it fine, but I have come to find that the thumb brake is dificult to release, and then the strap sometimes interferes with re-holstering. I really dont want to shoot my toe off because the strap catches on the trigger, so I have not been using the thumbrake strap at all, and the gun is not secured except by gravity.
At under $30 these fit the price point, but even the Fobus site does not have pictures of them...
Any help would be appreciated.
-
Some browsing around of the Safariland website led me to this list of holsters designed for the CZ75. The "xxx" after each part number are the 3 digit codes for matrial/finish and rh/lh. Some of the holsters only list one finish, some have several, but I just represented them as "xxx". Also, some of the parts appear to be interchangeable, but numbered differently. For example, the only "apparent" difference between a 6004 and 6005 is the addition of a quick release on the attachment straps, and has nothing to do with the parts that touch the gun. I just picked up a used 6005 with a belt attachment that someone put together from parts.
This list may have errors, may not be complete, and should only be used as a reference.
Duty holsters:
6280-90-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=6280)
6287-90-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=6287)
Tactical holsters:
6004-90-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=6004)
6005-90-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=6005)
Concealment holsters:
6287-90-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=6287)
5181-99-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=5181)
5187-99-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=5187)
5188-99-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=5188)
5189-99-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=5189)
567-51-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=567)
568-51-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=568)
Competition holster:
014-853-xxx (http://www.safariland.com/DutyGear/product.aspx?pid=014)
-
Antone know if this would this fit a CZ75?
http://www.fleetfarm.com/mff/detail/blackhawk-3-slot-pancake-holster-rt-/0000000080768
I can the it for a Baretta 92 or a 1911.
-
Antone know if this would this fit a CZ75?
http://www.fleetfarm.com/mff/detail/blackhawk-3-slot-pancake-holster-rt-/0000000080768
I can the it for a Baretta 92 or a 1911.
As this Holster appears to be precisely molded for the Beretta/Taurus 92, I would say No. Holsters that fit Cz75's, Clones, and the Beretta/Taurus 92 are NOT precisely molded.
-
I have a "GARRETT" leather lined Kadex holster that is made for a 1911 that I use at USPSA matches for my Dan Wesson stainless PM7 .45. My nickel 75B works in it very well also and the leather lining will protect the finish. The "Garrett" has adjusting screws on it so you can set the "tightness" and also the cant. Very cool holster and a great company (man and wife) to deal with. A bit pricey, but worth it in my opinion. Also check out their "Pez dispenser" mag holder, I don't remember its real name, but it holds 6 mags comfortably and they're always in the same place-one after another- so your hand is always grabbing them in the same place. Makes mag changes during a match easier in my opinion than having single or double mag carriers all over the place. It looks a bit weird, but works GREAT!
Wow, checked these out and I think I am going to spring for one soon! Look perfect. Thanks for the tip.
-
I just ordered one of these:
http://www.amazon.com/Defense-Retention-Paddle-Holster-Removable/dp/B008YM0R72/ref=sr_1_2?s=sporting-goods&ie=UTF8&qid=1355509042&sr=1-2&keywords=cz+75B+itac
Curious if anyone has had success with it. I like the Blackhawk Serpa for my G27. It isn't for conceal (unless jacket season) but very secure to belt and gun is very secure with lock, and unlocking puts your finger to the rail where it needs to be for safe drawing. I hope the itac is a good fit too.
-
I just ordered one of these:
http://www.amazon.com/Defense-Retention-Paddle-Holster-Removable/dp/B008YM0R72/ref=sr_1_2?s=sporting-goods&ie=UTF8&qid=1355509042&sr=1-2&keywords=cz+75B+itac
Curious if anyone has had success with it. I like the Blackhawk Serpa for my G27. It isn't for conceal (unless jacket season) but very secure to belt and gun is very secure with lock, and unlocking puts your finger to the rail where it needs to be for safe drawing. I hope the itac is a good fit too.
I use one of these for range use with my 75b. I like it, good fit a construction. I removed the spring from mine for personal preference. I can lock it in or keep it unlocked for a faster draw... Should probably put the spring back in and better my skills with the retention button.
.
I think you will be happy with your purchase. Got mine used, like new, off ebay for $10
-
Just bough a paddle holster custom made for a glock 27. My CZ 75 B fits like a glove in this leather holster.
-
ITAC roto pancake holster with drop attachment for this guy. Perfect for range work.
-
Tagua makes a nice OWB holster for the 75B. Open muzzle but runs the full length of the pistol so its protected. Will allow cocked and locked after it breaks in a couple days.
-
it depends greatly on what you want to do with it. the original poster did not say.
for competition i use Blade=Tech. See Dillons latest catalog for some info.
-
One of the guys at the club showed us a rig he had just put together for his daughter to shoot comp, belt, mag pouches and holster, all Safariland, the thing just oozed quality ,pretty pricey from what I can gather but mate if I had the buckaroos I would get one in a heart beat. Both my revolver and pistol holsters are Safariland, they are the bees knees :)
-
Are there any AIWB holsters that fit it?
-
Do those of you using the Bladetech find that your finish is wearing on the slide or frame of the firearm from the holster?
I need something for steel competitions and for handgun classes and can't use the active retention like the iTac and Serpa. I was going to ask someone to make a Kydex for me, but it started seeming like the hard plastic on this finish will create advanced wear on the finish.
-
The Fobus paddle for the 75B fits just fine. I love mine. Not a duty holster but not intended to be either. I am done spending over 100.00 for custom jobs. I have a whole box of them ready for ebay. I got tired of threading belt holsters on to my belts. Got to the point where I had several different pants outfitted with various belts and holsters hanging in my closet at the same time ready for whatever gun I was going to carry that day. Lazy - perhaps so. The older you get I figure you should try to make your life easier. I introduced myself to the paddle holster and BINGO! If you still want to spend big bucks on a custom leather paddle job, you can. Angus Hobdell recommended I try BladeTech for my CZs so I ordered up one for my Rami BD. Probably a 6 week wait since they are made to order but I know my Rami will wait patiently.
-
Rowe 75:
I use one of these for range use with my 75b. I like it, good fit a construction. I removed the spring from mine for personal preference. I can lock it in or keep it unlocked for a faster draw... Should probably put the spring back in and better my skills with the retention button.
Some local competition venues won't allow the trigger finger release holsters at all.
I was at a match where a shooter shot himself in the leg with a Serpa. Luckily, he had the .22 conversion slide on his 40 cal pistol. They left the buillet in rather can cause more damage to his thigh.
While in practice the release does position your finger well, in the "adrenilin of the moment" it may NOT on a fast draw-and-shoot situation..
Isopropyl: Do those of you using the Bladetech find that your finish is wearing on the slide or frame of the firearm from the holster?
I have two. The DOH for a 75B took a long while to show much wear.
The new one for my 75 Shadow( Around 6K rounds of practice and comp)., shows more finish wear in 6 months than my B did in 30K rounds.
I do like the holster for function though.
-
I ended up purchasing this one off eBay back a couple months ago.
SigTac CZ75B Tactical Roto Paddle Holster Retention Level II ( HOL-RPR--CZ75B ).
That is the title page description from eBay but when goggled, a lot pops up.
Seems to be similar to the Safariland retention, not as $$ though, got mine delivered to the door for 29.00
Solid construction, adjustable,great locking setup and solid belt connection.
-
Holsters for CZ75B seem to be few indeed. I have had my 75B in 40 S&W for 8-9 years but have not carried it because of the holster issue. I have ordered one from Hight Noon and hope it will fit properly.
-
hello,
I have a CZ 75 B.
My problem is you cannot find OWB Kydex holster easily.
Is there anyone use a Glock 17,22 holster or Baretta F92 holster for CZ75 B. Which other firearm holster fits CZ75 B?
Anyone tried?
-
Does anybody own a gcode-RTI set up?!
Any personal critique with that and a cz75b? Or 97
-
G-code RTX holster. Wonderful holsters but not for CZ75 B.
I wish I can find one fits my CZ75 B
-
Are there any AIWB holsters that fit it?
For AIWB I have been dealing with Tony at JM Custom Kydex... he does an excellent AIWB holster and I just ordered my first for a CZ 75B that works with the full sze CZ and the Compact as well as my Canik C-100 :-)
-
Have you tried a G-CODE holster for CZ75 B?
-
I heard about an ITAC-CZ75 but have seen one yet. Anybody tried this paddle holster?
I got mine on amazon, with a detachable spare mag holder. It's great, like the Blackhawk Serpa fits well. Wish I could get one for the 97B.
-
I am looking for a Kydex holster but couldnt find a good one?
Raven Concealment brand.. Anyone tried this for CZ75B ?
-
I am looking for a Kydex holster but couldnt find a good one?
Raven Concealment brand.. Anyone tried this for CZ75B ?
Comp Tac International. Just got one and it's perfect.
http://www.comp-tac.com/product_info.php?products_id=182
-
I went to my local gun store and tried a large number of holsters to see what fits and what doesn't.
I ended up buying a De Santis Mini Slide for a Glock 17 and it Fits PERFECTLY! I really like this holster, it puts the weapon right where I want it and holds it tight.
Also, the De Santis S.O.B. for Colt 1911 fit really well, but I didn't like the extreme cant of that holster. De Santis Sky Cop for Glock 17 worked but seemed a bit loose at the barrel end. I found a De Santis thumb break for a 1911 and it did NOT fit. Serpa for the 1911 fits well, but it seemed very bulky to me, not good for concealed carry at all. I suspect that most holsters for full sized 1911's would fit, but not all.
This is one of those things that it makes sense to buy in person where you can actually wear it and know if it fits, if it is comfortable and if the gun is in the position that you wanted. Without trying it out (buying online), you are taking a crap shoot and may or may not like what you get, may end up buying another one later. I thought I liked the Serpa based on the internet, but when I got it in my hands and wore it, it wasn't what I expected.
-
CZ USA web store has surplus duty holsters in stock.
12 of them left.
http://shop.cz-usa.com/ProductDetail/512513_Leather-7585-Belt-Holster (http://shop.cz-usa.com/ProductDetail/512513_Leather-7585-Belt-Holster)
I currently use one designed for the PCR that leaves the muzzle exposed. Great quality. I can carry both my 75 and my Shark FC in it. Bought it from SGAmmo a few years ago.
I just saw these yesterday though and ordered one.
The PCR one has held up great through two years of EDC and I expect many more.
This one I hope will be just as nice. New leather duty holsters like this usually sell for upwards of $100. $20 is a steal.
-
I bought one of the holsters from CZ USA last week. Nicely made and a good price. A bit tight but it should stretch out some being leather. I like it. - Bodene
-
I bought a galco combat master and I am completely satisfied with the fit and quality for the price.
-
The best holster that fits real well my CZ 75B is the pancake concealment holster of my Beretta 96D. Since I don't have anymore my Beretta I tried my CZ 75B into it and it fits real good.
I have a question about the wolff recoil round spring that was sent to me by MidwayUSA. It's a little bit longer than the original flat spring of my CZ 75B. Will there be a problem. I saw others comment that they're having hard time inserting the wolff spring but I myself I did not encounter difficulties, but I have not tested the gun at the range yet...! Can anyone give me a comment?
Jek
-
The best holster that fits real well my CZ 75B is the pancake concealment holster of my Beretta 96D. Since I don't have anymore my Beretta I tried my CZ 75B into it and it fits real good.
I have a question about the wolff recoil round spring that was sent to me by MidwayUSA. It's a little bit longer than the original flat spring of my CZ 75B. Will there be a problem. I saw others comment that they're having hard time inserting the wolff spring but I myself I did not encounter difficulties, but I have not tested the gun at the range yet...! Can anyone give me a comment?
Jek
I'm sorry but I don't have an answer on the recoil spring, but I'd like to know where to get the concealment holster your talking about.
Thanks
Sent from my XT1080 using Tapatalk
-
I am looking for a Kydex holster but couldnt find a good one?
Raven Concealment brand.. Anyone tried this for CZ75B ?
Comp Tac International. Just got one and it's perfect.
http://www.comp-tac.com/product_info.php?products_id=182
+1 on the Comp Tac International.
-
I made this for IDPA
(http://img.tapatalk.com/d/14/04/13/zegunydy.jpg)
-
Galco Combat Master CM223 OWB
-
(http://i1276.photobucket.com/albums/y466/msadam/Mobile%20Uploads/DSC_0033_zps58jwapke.jpg) (http://s1276.photobucket.com/user/msadam/media/Mobile%20Uploads/DSC_0033_zps58jwapke.jpg.html)
(http://i1276.photobucket.com/albums/y466/msadam/Mobile%20Uploads/DSC_0035_zpsiveydyuz.jpg) (http://s1276.photobucket.com/user/msadam/media/Mobile%20Uploads/DSC_0035_zpsiveydyuz.jpg.html)
This is made by a South African manufacturer. I think he supplies USA as well: www.rossgun.com
-
Don't know if it's been mentioned already but holsters made for the standard sized S&W Third Generation pistols (5906, 5904, 5946, 915, etc) will fit the CZ75 variations with little to no trouble.
-
All of my holsters are made by Panther Concealment in Jacksonville, FL.
When I got my 75BD I called them and they didn't have a blue gun for the 75 so I stopped by on my way home from Pensacola and he made me one while I waited.
I know not much of an answer for most people but it wasn't to far out of the way and I like his holsters.
(http://i.imgur.com/N4MguhV.jpg)
-
As a rule of thumb, will the holsters that fit the 75B also fit the 75B SA, given the difference in the slide?
-
I really like SigTac holsters. There are 2 models for CZ 75: HOL-RPR-CZ75 (UPC 798681455324) and HOL-RPR-CZ75B (UPC 798681455362). Unfortunately there are no pictures showing the difference between these models (all pics I could find are the same for both models), so I ordered both:
(http://eheh.net/data/SigTac_holsters_for_CZ75.jpg)
Despite description on the package, model HOL-RPR-CZ75B (on the right, UPC 798681455362) is the version with "fins" for CZ 75 models _without_ rails, while model HOL-RPR-CZ75 (on the left, UPC 798681455324) has no "fins", so it'll fit CZ 75 models _with_ rails. My CZ 75 B and CZ 75 BD fit in the HOL-RPR-CZ75B just perfect, but I had to cut the "fins" just a little bit for my CZ 75 D Compact to fit in it (in the end I also cut the holster to the pistol's length). Both holsters are the same width, the only differences are the "fins", slightly different bumps inside (doesn't seem to make any difference), and the stamping on the inner side of the trigger guard (as shown on the pictures). I hope this is helpful.
-
As a rule of thumb, will the holsters that fit the 75B also fit the 75B SA, given the difference in the slide?
The 75B SA has a wider muzzle and WILL NOT fit in a holster specifically made for a regular 75B like a kydex etc. Some leather holsters will fit a little more snug. But a 75B will fit in a holster designed for the single action. My blade tech made for my SA would fit my other 75B's and my 75 compact no problem.
-
this is what I use and I love it!
http://czcustom.com/itaccz75.aspx
-
Fobus makes one, I found one cheap on eBay
-
If anyone's looking at Sticky Holsters--I'm using one for my shield for CCW and it's working well--also got some for full-size CZ's--the company website will tell you to use size LG-3 for 75B's--they fit snug but rear sight does catch--I also got LG-6S, which works better--(sight is just against back stitching, but clear enough so that it pulls clean), and 6S generally better fit for my SP01 IMHO.
-
Recently had a holster made for my CZ 75b SA by Privateer Leather (http://www.privateerleather.com/). Excellent workmanship, very well priced and extremely great to work with.
(https://farm1.staticflickr.com/650/22063773972_7783937733_b.jpg) (https://farm6.staticflickr.com/5632/21455108913_d218e74f6c_b.jpg)
-
Recently had a holster made for my CZ 75b SA by Privateer Leather (http://www.privateerleather.com/). Excellent workmanship, very well priced and extremely great to work with.
(https://farm1.staticflickr.com/650/22063773972_7783937733_b.jpg) (https://farm6.staticflickr.com/5632/21455108913_d218e74f6c_b.jpg)
This looks really nice!
Sent from my DROID MAXX using Tapatalk
-
since I got mine a day or two ago, i've had it in an Uncle Mike's holster that fits it nice and snug, took the straps off of it and carry it without them.
Looking into an ITAC or a Serpa, anyone know which one would be better?
-
I'm disappointed there isn't a Safariland ALS holster for the CZ75.
Sent from my SCH-I545 using Tapatalk
-
I made this: (http://i1276.photobucket.com/albums/y466/msadam/Mobile%20Uploads/IMG_20160327_121846_zps2rfwrwf9.jpg) (http://s1276.photobucket.com/user/msadam/media/Mobile%20Uploads/IMG_20160327_121846_zps2rfwrwf9.jpg.html)
(http://i1276.photobucket.com/albums/y466/msadam/Mobile%20Uploads/IMG_20160327_121804_zpscxdl9bua.jpg) (http://s1276.photobucket.com/user/msadam/media/Mobile%20Uploads/IMG_20160327_121804_zpscxdl9bua.jpg.html)(http://i1276.photobucket.com/albums/y466/msadam/Mobile%20Uploads/IMG_20160220_155710_zps3bsleiil.jpg) (http://s1276.photobucket.com/user/msadam/media/Mobile%20Uploads/IMG_20160220_155710_zps3bsleiil.jpg.html)(http://i1276.photobucket.com/albums/y466/msadam/Mobile%20Uploads/IMG_20160220_155633_zpsrssd3hjb.jpg) (http://s1276.photobucket.com/user/msadam/media/Mobile%20Uploads/IMG_20160220_155633_zpsrssd3hjb.jpg.html)
-
Tagua makes a nice OWB holster for the 75B. Open muzzle but runs the full length of the pistol so its protected. Will allow cocked and locked after it breaks in a couple days.
2x on the Tagua. Mine is for a Sig 226, but fits my PreB 75 great
-
You should also look at the Galco Royal Guard IWB holsters. They make them for 75B.
-
Blackhawk Serpa for 75,75 Shadow & 85 C&B
http://www.midwayusa.com/product/194828/blackhawk-cqc-serpa-holster-right-hand-holster-cz-75-75-sp01-shadow-85b-polymer-black (http://www.midwayusa.com/product/194828/blackhawk-cqc-serpa-holster-right-hand-holster-cz-75-75-sp01-shadow-85b-polymer-black)
-
I just got a Galco Combat Master. Very good quality, comfortable to wear and the retention is great right out of the box.
-
I noticed (after I had the RMR added to my P07) that custom, meaning we'll make it while you wait, kydex/kydex & leather holster makers are attending the gun shows in my area now.
Last gun show I had an all kydex IWB holster made up for my customized P07. The guy altered/formed it right there on/at his table.
The next gun show (about a week from now) I intend to see if the guys making the leather/kydex combination holsters show up again. They got a "tool" set up behind their table to form the kydex. You pick out the leather shape/size and color you want, you pick out the kydex you want (multiple stacks of various emblems, signs, symbols, etc. and colors) and they combine them all to make you a holster that fits your gun. Can't say how good those are, haven't gotten one yet.
I'm sure vendors doing that can make them for CZ 75's also.
-
A lot of folks don't like them cause you gotta take the time to practice with it, but I have used a Blackhawk Serpa for years with my 1911, so when I got my CZ 75B SA, I got a Serpa for OWB and an Alien Gear for IWB. I've been quite happy with both and use the Serpa for IDPA.
Sent from my KFTHWI using Tapatalk
-
I bought a blackhawk serpa for a beretta 92 and it fits perfectly
-
I EDC my CZ 75 B, and I do it in an Israeli Yamam IWB holster from Frontilne Holsters. It's pretty close to the old Summer Special holster made for 1911s. It's very comfortable for all day carry, as long as you use a good belt. As a matter of fact I strapped it on over 12 hours ago and it's still comfortable - feels like I could wear it for another 8 hours or so, and if I fall asleep in my Lazy-Boy again I just might.
The belt I'm using as a Bullhide 1/4" thick steel reinforced belt from Daltech Force, and I specified that it have 3/4" spacing on the adjustment holes for the buckle. That seems to make all the difference in the world, as it seems like, with standard 1" hole spacing the belt is either too tight or too loose.
-
I would like to find a mid or low ride owb with a full flap to use in the field hunting camping.
Havent found one i like yet.
-
G-code SOC for the Beretta 92 fits. Has the RTi option too which is nice. I'm a lefty, so your mileage might vary on a RH, but I done see why it would.
Having read this thread I guess I should check my Sig 226 shoulder holster too.
Update: desantis model 80 shoulder holster fits, not 100% tight with the thumb strap. Mag holder doesn't fit well due to the base plate angle.
-
TTGunleather.com makes some really nice ones for the 75B.
-
Eagle SAS mkv fits if you're interested in a decent drop leg with a built in mag pouch.
-
I have a holster from Jim Hastings. It's a top leather pancake holster, it is lined for my high polish. I just order from http://legacyfirearmsco.com a "appendix holster" legacy. With all the options for my 75b high polish. I also have a ghxst appendix holster for my P07 detail of this holster is super. bought it off of eBay. He has alot of options also but not shown. you have to write him, and a very quick turn around time. I think I got mine in 3 days from me ordering it. Welcome from Mississippi
Sent from my SM-G955U using Tapatalk
-
Milt Sparks #60TK with matching dual mag pouch for when I don't need to remove the gun during the day. Comp-Tac paddle for OWB and Comp-Tac IWB for when I need to carry IWB.
-
Vedder kydex, single clip, with a claw.
-
So while the older Bianchi M12 holster was designed for the Beretta M9 92, it does fit a few more models of handguns like a 1911. Surprisingly, when I went to one of my local ranges that has a 75 SAO and standard SP-01, both of those pistols fit the holster quite well.
-
I am about to order a KydexTech holster for my 75B omega.
-
Crossbreed makes a really nice one
-
I recommend this holster for concealed carry: https://www.etsy.com/listing/528703016/cz-75-vertical-genuine-leather-shoulder?ref=shop_home_active_44&pro=1&frs=1 (https://www.etsy.com/listing/528703016/cz-75-vertical-genuine-leather-shoulder?ref=shop_home_active_44&pro=1&frs=1)
(https://i.etsystatic.com/15390602/r/il/ad3eec/1286405459/il_794xN.1286405459_9geb.jpg)
It is very light and comfortable, and it will fit most people. It's custom fitted for the Cz-75B.
-
Clinger no print won
der.
-
I recommend Falco.....
https://www.falcoholsters.com/
I have ordered nylon holsters for my CZ-75B, Glock 17 and 43, along with nylon belts, mag pouches, knife pouches, etc., and I just love their stuff. They also offer holsters in leather and kydex.
Check them out! ;D
-
I purchased a Wright Leatherworks “Predator Pancake Holster” for my CZ75B and the quality and feel is really top notch.
-
I am looking for an OWB concealment holster for my full size 75BD.
Any suggestions?
Thanks