The Original CZ Forum
CZ PISTOL CLUBS => CZ82 & CZ83 CLUB => Topic started by: armoredman on September 25, 2010, 10:45:47 AM
-
Generally speaking, the CZ 82 and 83 should be identical in fit for any holster. The only one I know of specifically is the High Noon line, http://highnoonholsters.com/index.html, (http://highnoonholsters.com/index.html,) plus the Uncle Mikes nylon generics http://www.uncle-mikes.com/um_cat_holsters.html, (http://www.uncle-mikes.com/um_cat_holsters.html,) the size 1 should work.
-
FIST makes a couple of different kinds along with BladeTech and Cross breed.
I've read some where that a Fobus paddle holster for the Kahr K40 will fit
but I have not tryed this on my own yet.
-
I recently made my own leather/Kydex IWB holster for my CZ83. Works great and cost under $20.00.
Will sent pict when my camera is returned.
-
Here's a pancake that's adaptable as an IWB for a decent price. I think I may order one soon.
http://www.simplyrugged.com/the-cuda/ (http://www.simplyrugged.com/the-cuda/)
-
Just came across this one the other day. I haven't been out to try it yet though.
http://www.stonerholsters.com/index.php?main_page=product_info&cPath=1_3&products_id=117 (http://www.stonerholsters.com/index.php?main_page=product_info&cPath=1_3&products_id=117)
-
I am wondering if any CZ 82 owner has tried the Blade Tech DOH holster listed for CZ 83 to see if it fits the CZ 82?
TIA
Caroline
-
I use a Gould and Goodrich model 891, K40. BTW, since the front of the trigger guard on the CZ83 is a different shape than that of the 82, there are some holsters that will not fit the 83 and the 82 interchangably. General rule of thumb though, most leather holsters where one fits, the other will too. I'm not much into polymer holsters, but suspect there is less tolerance between designs.
-
Crossbreed makes a CZ83 holster, but will form the CZ82 trigger guard if you request it in email.
-
Started making holsters about a year ago - because I'm cheap! This is what I made for my son's CZ 82 and I'm making my own the next three day weekend I get.
(http://i1237.photobucket.com/albums/ff470/Hayfield123/CZ-82frontwithpistolin-1.jpg)
-
nice holster hayfield...I am going to try my hand at making a holster for my cz-82 but haven't decided on leather or kydex yet. ???
-
Good luck big 54r! I know you'll do a great job. I knew nothing about making holsters when I started, about 18 months ago. I did lots of research on the internet and learned a lot from the first couple holsters I made. Each gets a little better and I even line them, now, as the rough leather was wearing the finish off my Kimber. I use two weights of leather and glue them, rough side to rough side, with the very thin stuff on the inside - even did one lined in pigskin!
-
Desantis 032 is a very nice fit. It is has belt loop and an Inside-the-waistband clip. It also has a thumb break.
I bought mine at a local range shop where I could try for fit. However, for your convenience, here is a link to Optics Planet showing the exact holster pictured that I purchased:
http://www.opticsplanet.net/desantis-right-hand-black-dual-carry-032bae1z0.html (http://www.opticsplanet.net/desantis-right-hand-black-dual-carry-032bae1z0.html)
(http://i86.photobucket.com/albums/k95/97thSignalman/IMG_2079800x600.jpg)
(http://i86.photobucket.com/albums/k95/97thSignalman/IMG_2081800x600.jpg)
Photo showing package label details for Desantis 032BAE1Z0 Holster
(http://i86.photobucket.com/albums/k95/97thSignalman/DesantisHolster104.jpg)
-
I should be recieving a CrossBreed for a CZech 83 (1989) any day now, Was told that the round trigger guard will work fine with newer style squared off holster. i will keep you posted with the results.
-
I just put and order in for a JBP "Sleeping Dog" Dual Use holster (http://www.jbpholsters.com/servlet/the-67/LEATHER-GUN-HOLSTER-JBP/Detail (http://www.jbpholsters.com/servlet/the-67/LEATHER-GUN-HOLSTER-JBP/Detail)). I have heard good things. I will update everyone after I receive it about my impressions.
-
MSol, its good to see "CZ 82" starting to appear among the choices that holster makers are providing! Looking forward to hearing how it fits.
-
I like my kydex "J-Hook" from Mo's Holsters (http://www.mosholsters.com/). It's molded specifically for the CZ-82 and carries like a dream.
-
I know that Hunter brand has holsters that fit 82s & 83s.
I think that Wild Bill's concealment out of Garner NC mates them too as a special order item.
http://www.wildbillsconcealment.com/shop/ (http://www.wildbillsconcealment.com/shop/)
http://www.huntercompany.com/index.html (http://www.huntercompany.com/index.html)
-
Just recieved my Cross Breed yesterday, They made it the round trigger guard style (opposed to sqaure) which works very nice. The 83 snaps in nicely and stay's put perfectly formed to the 82/83 pistol. It's a bit on the pricey side but when it comes to comfort and concealability well worth it to me.
-
I carry my 82 in a CrossBreed and I don't know anything better out there. I now have 4 CrossBreed holsters for 3 of my carry guns and 1 for IDPA. Mark Craighead, the owner, is a great guy and always provides top service. Just the other day i emailed them and said i had a jhook that broke off and they sent me a whole new set in a few days NO Charge! That's great service.
-
Today I tried using my custom made leather holster fitted for a 1911. Granted the CZ82 fits a bit loosely but once one wears the rig the gun stays put just fine. Pleasant surprise!
(http://img.photobucket.com/albums/0703/George/CZ%20550/IMG_6484.jpg)
(http://img.photobucket.com/albums/0703/George/CZ%20550/IMG_6485.jpg)
-
Just a quick update on the JBP holster I ordered a while back (JBP Sleeping Dog Dual Use Holster - http://www.jbpholsters.com/servlet/the-67/LEATHER-GUN-HOLSTER-JBP/Detail (http://www.jbpholsters.com/servlet/the-67/LEATHER-GUN-HOLSTER-JBP/Detail)). After a shipping hiccup (the holster was damaged by USPS and then lost entirely), JBP sent me another a few weeks back. It is exactly what I was expecting. It is a true dual use holster, meaning it does everything well, but nothing particularly great. As a IWB I give it 7 out of 10 stars, as a OWB I give it an 8, but as an inexpensive, solid quality, incredibly flexible, dual use I give it a 10 out of 10. Asking price is $39.99 and shipped cost was somewhere around $45.00. For a leather holster of this quality, made specifically for this gun, this is a great deal.
Pro's: Value, flexibility, fit, function, can be adjusted to work for "cocked and locked" carry (though not my personal choice), quality leather, quality clip
Con's: Limited to belts 2" or smaller
Recommendation: High
(http://i381.photobucket.com/albums/oo259/mikes001/CZ82Pics004.jpg)
(http://i381.photobucket.com/albums/oo259/mikes001/CZ82Pics005.jpg)
(http://i381.photobucket.com/albums/oo259/mikes001/CZ82Pics003.jpg)
-
Although the CZ82 is not specifically listed, Barsony make several universal designs that could possibly fit the pistol.
http://www.barsonyholstersandbelts.com/servlet/the-Concealment-Holster/Categories (http://www.barsonyholstersandbelts.com/servlet/the-Concealment-Holster/Categories)
I once heard that holsters made for the Bersa 380 would be a good fit for the CZ82. Any input of that?
http://www.barsonyholstersandbelts.com/servlet/the-127/Leather-Belt-Clip-Holster/Detail (http://www.barsonyholstersandbelts.com/servlet/the-127/Leather-Belt-Clip-Holster/Detail)
Prices seem to be reasonable. They also sell on eBay.
I may order one soon.
-
I just found a Don Hume H717 No. 30 at my LGS that fits my CZ82 pretty well. The only modification I made was to add some tennis racket wrap to the underside of the thumb break. Now its a nice snug fit for the old pistola. It?s a well made holster that came at a very nice price. It normally sells for $41.00 but was marked down to $28.00. Forget about Barsony, they never responded to my email. I was also considering a custom made holster from a local guy but he never responded to my email or my phone call. Now I?m glad they blew me off. ;D
(http://i928.photobucket.com/albums/ad126/footsimoto_2009/Holster001.jpg)
(http://i928.photobucket.com/albums/ad126/footsimoto_2009/Holster004.jpg)
(http://i928.photobucket.com/albums/ad126/footsimoto_2009/Holster008.jpg)
-
ACE "Small 9MM" IWB fits CZ82 perfectly:
(http://www.hverovhe.com/ace9.jpg)
This one's for sale @ $10 shipped. Got stupid and ordered a LEFTY :( and I'm a Righty!
-
I ordered the DeSantis 032, but what are you guys using for belts?
-
Tinner, all you guys, how about fashion photos of your holsters when you carry?? That way we can see how far the gun and holster sticks out from the hip or how well they fit inside the waist band or front pocket.
I want to see a photo of that CrossBreed too..
The CCW instructor made a emphasis that the holster must be easy to draw from and also easy to return the gun to. He recommended leather holsters that have a reinforcing strip (steel nylon or leather) at the top of the holster so the leather does not collapse into over time.
-
I made an attempt at making a Minimal Slide for the 82. I had made one for my CZ 40B, so I figured I would give the 82 a go. I plan on making a few different kinds in the future, but it is slow going while working in my spare time. (which I don't get near enough of)
(http://tapatalk.com/mu/438d40d6-2500-a675.jpg)
(http://tapatalk.com/mu/438d40d6-2544-3446.jpg)
(http://tapatalk.com/mu/438d40d6-255d-4889.jpg)
CZ40B, CZ82 plus some other Babies
-
I now have 4 holsters for my CZ82 first one from eBay in nylon made in USA. Fits good but is still not what I want for CCW carry.
(http://i1237.photobucket.com/albums/ff464/brasse/eBaynylonHolster2.jpg)
(http://i1237.photobucket.com/albums/ff464/brasse/eBaynylonHolster.jpg)
-
The deSantis 032E1 dual fits the best.
(http://i1237.photobucket.com/albums/ff464/brasse/DeSantis032E1a.jpg)
(http://i1237.photobucket.com/albums/ff464/brasse/DeSantis032E1.jpg)
I have two 5.1 black belts 1.5 inches to go with this holster.
-
I really like my Gazzelle 41 (PPK?) in brown, fits the gun real nice the the top strap is too short. I will probably buy some snaps and use a piece of old leather to make the snap functional.
This will look great with my gator brown finish Blackhawk dress belts.
(http://i1237.photobucket.com/albums/ff464/brasse/Gazzelle41HolsterwCZ82.jpg)
(http://i1237.photobucket.com/albums/ff464/brasse/Gazzelle41HolsterwCZ82a.jpg)
-
One more from eBay made in Tailand, not great but functional and cheap. Made for the PPK380, again top strap too short.
(http://i1237.photobucket.com/albums/ff464/brasse/PPK380holster.jpg)
There is one secret I have you guys should know. Red Wing boots has a product called shoe stretch, an alcohol oil mix that I have used for 20 years to stretch wide and EE sizes into tripple E wide. Works on any leather to break it in faster. Using it on my holsters to get the fits better.
-
I fit-tested one of my CZ 82's in my Don Hume(H715 M No.99M-P22) P-22 holster. It fits great. I'm wondering if the CZ 82 will fit a Fobus P-22 holster. If it fits, my only problem will be finding a left-handed P-22 Fobus holster.
You right-handers don't know how lucky you are!!!!
-
Received my holsters today from http://www.gungloveholsters.com/
Very high quality. Holds gun tightly. Also keeps it snug against your body for concealment.
Tom is a very nice, and honest guy to deal with.
Here is a link with pictures of mine being made. http://www.gungloveholsters.com/uploads/HOW_ITS_MADE.pdf
(http://i179.photobucket.com/albums/w285/towboat_er/IMGP4308.jpg)
(http://i179.photobucket.com/albums/w285/towboat_er/IMGP4316.jpg)
(http://i179.photobucket.com/albums/w285/towboat_er/IMGP4314.jpg)
(http://i179.photobucket.com/albums/w285/towboat_er/IMGP4313.jpg)
-
Here are a couple UBG holsters made for me.
http://db.tt/RORgPhJ6
-
Here are a couple UBG holsters made for me.
http://db.tt/RORgPhJ6
NIce holster. I also like the grips in the photo. Where did you get those grips?
-
Thanks, I make them myself out of the stock grips that come on the gun.
-
I have the Falco shoulder holster set.... Ill endeavor to take some pics this weekend
http://www.falcoholsters.com/eshop/leather-holsters/shoulder-holsters/95-leather-shoulder-holster-system-it-42-22.html (http://www.falcoholsters.com/eshop/leather-holsters/shoulder-holsters/95-leather-shoulder-holster-system-it-42-22.html)
-
Ive had it a couple years and it has served me very well indeed....
(http://bluegrasscarnivores.com/cz82/falco1.jpg)
(http://bluegrasscarnivores.com/cz82/falco2.jpg)
Thanks for looking,
-
Has anyone tried any TT Gunleather holsters with the CZ 82?
-
I sold my CZ-82 so I am offering this fine Desantis 032 holster for sale at $20 plus USPS flate rate shipping. I will accept paypal or USPS money order. The fire "I'll take it" gets the holster pending receipt of paymant. I is in like new condition just like in the photos. PM or emai me if you are interested.
Desantis 032 is a very nice fit. It is has belt loop and an Inside-the-waistband clip. It also has a thumb break.
I bought mine at a local range shop where I could try for fit. However, for your convenience, here is a link to Optics Planet showing the exact holster pictured that I purchased:
http://www.opticsplanet.net/desantis-right-hand-black-dual-carry-032bae1z0.html (http://www.opticsplanet.net/desantis-right-hand-black-dual-carry-032bae1z0.html)
(http://i86.photobucket.com/albums/k95/97thSignalman/IMG_2079800x600.jpg)
(http://i86.photobucket.com/albums/k95/97thSignalman/IMG_2081800x600.jpg)
Photo showing package label details for Desantis 032BAE1Z0 Holster
(http://i86.photobucket.com/albums/k95/97thSignalman/DesantisHolster104.jpg)
-
The Desantis holster pictured in my post above is up for sale. Check it out in the classified section. I no longer have my CZ-82 so I am selling this fine holster. Thanks for looking.
-
Just got my Desantis holster in the mail today. Fits perfectly, maybe a tiny bit loose, but secure.
-
Check Falco Holsters. They're made in the Czech Republic and are extremely well made and finished.
Thanks,
Frazer1
-
The Don Hume #59 JIT SLIDE fits really well.
-
I sold my CZ-82 so I am offering this fine Desantis 032 holster for sale at $20 plus USPS flate rate shipping. I will accept paypal or USPS money order. The fire "I'll take it" gets the holster pending receipt of paymant. I is in like new condition just like in the photos. PM or emai me if you are interested.
Desantis 032 is a very nice fit. It is has belt loop and an Inside-the-waistband clip. It also has a thumb break.
I bought mine at a local range shop where I could try for fit. However, for your convenience, here is a link to Optics Planet showing the exact holster pictured that I purchased:
http://www.opticsplanet.net/desantis-right-hand-black-dual-carry-032bae1z0.html (http://www.opticsplanet.net/desantis-right-hand-black-dual-carry-032bae1z0.html)
(http://i86.photobucket.com/albums/k95/97thSignalman/IMG_2079800x600.jpg)
(http://i86.photobucket.com/albums/k95/97thSignalman/IMG_2081800x600.jpg)
Photo showing package label details for Desantis 032BAE1Z0 Holster
(http://i86.photobucket.com/albums/k95/97thSignalman/DesantisHolster104.jpg)
I bought one of these holsters from optics planet and received it today. In my opinion my CZ-82 fits too loosely. I would not feel comfortable if I were to be forced to run while carrying and using this holster. Not that I would be running very far at my age. I would also be uncomfortable sitting (maybe a better description would be leaning back like at the movies) with my CZ-82 while in this holster. Not a slam on you 97thSignalman, just want others to know it is not a tight fit and might even be an issue with MY holster or a slight design change from Desantis. Not to worry though, my Glock fits very well in it.
-
I have a few that work well, but my DeSantis 111 Pocket-tuk is great and the fit is perfect.
-
I bought the discontinued CZ 82/83 Shoulder Holster Combo from CZ-USA. This afternoon there were only 4 left.
http://shop.cz-usa.com/P-11217/Shoulder-Holster-And-Mag-Pouch-Combo-Cz-8283-Surplus.aspx
The shipping was more than the $8.99 purchase price. Another thing. There weren't any instructions about how to wear the thing, but I think I figured it out.
Here is holster put together and adjusted for my shoulder.
(http://farm6.staticflickr.com/5464/6951288164_5a04766acd.jpg) (http://www.flickr.com/photos/harpdrinker/6951288164/)
CZ 82/83 Shoulder Holster Combo 006 (http://www.flickr.com/photos/harpdrinker/6951288164/) by fmtipps (http://www.flickr.com/people/harpdrinker/), on Flickr
Notice the thin leather strips thread through the slits on the larger leather supports.
Here it is under my arm. The white string hanging down is from my camera.
(http://farm8.staticflickr.com/7053/6951287816_f865703459.jpg) (http://www.flickr.com/photos/harpdrinker/6951287816/)
CZ 82/83 Shoulder Holster Combo 002 (http://www.flickr.com/photos/harpdrinker/6951287816/) by fmtipps (http://www.flickr.com/people/harpdrinker/), on Flickr
And here is the long strap to balance the holster on your right side.
(http://farm8.staticflickr.com/7116/6951287978_301d5a695b.jpg) (http://www.flickr.com/photos/harpdrinker/6951287978/)
CZ 82/83 Shoulder Holster Combo 004 (http://www.flickr.com/photos/harpdrinker/6951287978/) by fmtipps (http://www.flickr.com/people/harpdrinker/), on Flickr
Don't laugh. I wear both suspenders and a belt. It gives character to my style.
I used my Bersa Thunder 380 to give weight to the holster while making adjustments. A CZ 83 is in my future. I just haven't placed an order yet.
The combo comes with a pair of single magazine pouches as well. There is a belt loop on the backside of the snapped covered pouch.
-
Lot's of good sources here. I see that Mo's Holsters (and Mo's gunshop) is probably within 20 minutes from my house, so I think I'll pay them a visit and talk holster options for the CZ-82. It also got me thinking about a Tucker "The Answer" IWB that I have for my Glock 27 that I don't use. It's a great holster, but I just slightly prefer my DeSantis Scorpion. Anyway, the The Answer is a kydex shell bolted to a leather backing, with offset belt hooks. Why let a good holster go to waste...I bet I can form a new kydex shell for the CZ, and bolt it to the leather backing in place of the Glock shell. I did a quick Google search on How to Make a Kydex Holster, and this was one of many good links:
http://www.steyrclub.com/vb/threads/2602-Procedure-For-Forming-Kydex (http://www.steyrclub.com/vb/threads/2602-Procedure-For-Forming-Kydex)
In that post is a link to a source for kydex sheets and sheath/holster making supplies.
--Otter
-
I have a few that work well, but my DeSantis 111 Pocket-tuk is great and the fit is perfect.
I just ordered both the DeSantis 111 Pocket-tuk and the Desantis 032. When they arrive I'll take photos make comments of the CZ-82 fit for this thread! Thanks for all the good holster recon, guys!
-
I just ordered a Crossbreed OWB and asked them to fit it to the CZ82's round trigger guard. I'll let you know how it works after I get it in about six weeks.
Joe
-
Tucker Gun Leather lists the CZ-83 on their list of "leather pistol holsters"...Not sure what models. Tucker makes really nice products. I have one of their gun belts, and "The Answer for my Glock 27.
http://tuckergunleather.com/ (http://tuckergunleather.com/)
--Otter
-
Has anyone tried a Remora holster yet? I just ordered two for the CZ 83 I hope to take delivery of tomorrow: a Series 7 tuckable IWB with a full sweat shield, and a Series 7 "3 in 1" IWB/ankle/pocket. I've read/seen nothing but good reports.
-
Johnb007, to answer your pm, the Pocket-tuk is a perfect fit with good retention.
-
Johnb007, to answer your pm, the Pocket-tuk is a perfect fit with good retention.
Which Pocket-tuk model and style? I'm looking at their web site and don't see CZ listed so I presume the model which is made for one of the other pistols works ok with the CZ82/83?
-
Just recieved my holster from FIST. It is a small of the back holster retained with a clip. the holster is well made. fit and finish is superb I give it four stars.
http://www.fist-holsters.com/components/com_virtuemart/shop_image/product/_z___41_SMALL_OF_4f086ea1918b5.jpg (http://www.fist-holsters.com/components/com_virtuemart/shop_image/product/_z___41_SMALL_OF_4f086ea1918b5.jpg)
-
Johnb007, to answer your pm, the Pocket-tuk is a perfect fit with good retention.
Which Pocket-tuk model and style? I'm looking at their web site and don't see CZ listed so I presume the model which is made for one of the other pistols works ok with the CZ82/83?
I originally ordered the 111NAU4Z0, which is sized for the Ruger LC9 w/ Lasermax, but it's a tad large so I ordered the 111NAE1Z0, which is sized for the PK380. It should be arriving any day now, then I can let you know how it fits.
Edit 05/10/2012:
My new Pocket-tuk 111 arrived today. The Pocket-tuk 111 (111NAE1Z0) fits the CZ-82 like a champ!
DeSantis Right Hand Black Dual Carry Holster 032BAE1Z0
(http://i.imgur.com/vacPG.jpg)
(http://i.imgur.com/WlGkg.jpg)
Pocket-tuk 111 (111NAE1Z0)
(http://i.imgur.com/KNz91.jpg)
(http://i.imgur.com/hxHXw.jpg)
-
Anyone familiar with these holsters? I know, they're cheap but I'm wondering if that might be a good enough reason to give one a try while considering what might be a permanent choice. Thinking it might take some "practice wearing" to really get to know what the best fit is.
http://www.amazon.com/Federal-Holsterworks-ARoo2CZ82-Holster-CZ82/dp/B003LLQVQ2 (http://www.amazon.com/Federal-Holsterworks-ARoo2CZ82-Holster-CZ82/dp/B003LLQVQ2)
-
I'd check ebay first. Ya can find some on there.
http://www.ebay.com/itm/Makarov-9mm-PM-Concealed-Carry-Leather-Holster-CZ-82-CZ-83-P64-New-Rare-/261018954080?pt=LH_DefaultDomain_0&hash=item3cc5f12960
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p3984.m570.l1313&_nkw=cz82+holster&_sacat=See-All-Categories
-
Has anyone tried a Remora holster yet? I just ordered two for the CZ 83 I hope to take delivery of tomorrow: a Series 7 tuckable IWB with a full sweat shield, and a Series 7 "3 in 1" IWB/ankle/pocket. I've read/seen nothing but good reports.
In followup, my Remora holsterz are working very well. Their fitment chart indicates a CZ 83 needs a Series 7 size, but it also notes that Series 7 is intended for medium pistols up to a slightly shorter barrel length than the CZ 83 has. I noted the discrepancy in the comment space on my order and asked them to make whatever proper substitute might be needed, and for the "3 in 1" holster they sent a Series 12. Both holsters fit quite well. Above I forgot to note that I also ordered a pair of magazine holders, which also are working well.
So far I've carried the "3 in 1" in both IWB and pocket mode. IWB at 4 o'clock, canted forward, it rides securely and comfortably, even in a car. I was thinking I'd need a car holster, but now I doubt that. The holster stays secure when the CZ 83 is drawn, as it does when used in the pocket. The holstered gun concealed well in the front pocket of my Levis as long as I didn't tuck my shirt in -- the butt of the gun goes up to about the level of the pocket, so pants with a deeper pocket will be needed if I want to tuck.
Remora Holster is a relatively new company out of Florida: http://remoraholsters.com/. I don't think they advertize beyond their website -- it's all word of mouth. Comfortable, functional, adaptable, and affordable products with awesome customer service. I followed up my order with a phone call, which was a pleasant and productive experience, and their products come with a Lifetime "No Questions Asked" Warranty.
For your viewing pleasure:
http://www.youtube.com/watch?v=ZzsVZIAnpQA
http://www.youtube.com/watch?v=-o9uEINUGDg
http://www.youtube.com/watch?v=4izM0fiz6kk&feature=plcp
http://www.youtube.com/watch?v=sPMT3XjdgwQ
While the above are female-centric, these holsters work just as well for men, too. I just thought most here would prefer to look at cute girls.
-
So you got a non 3 in 1 and a 3 in 1. Right? the 3 in 1 is a Series 12. Since the 7 looked to be too short for the 82/83 barrel, what number did you get in the non 3 in 1 version?
-
dan,
My non-"3 in 1," is the Series 7 IWB tuckable full sweat shield I ordered. They didn't alter that part of the order. The CZ 83 fits in the Series 7 just fine. The trigger is completely covered. In fact, the rear site is overed, too. I was concerned that the rear site might snag upon drawing, but it doesn't. I was told the full sweat shield versions are popular because they not only protect you entire gun from your dermal excretions, but it also puts a layer of padding between you and protuberances on your gun -- they are very comfy.
Thr "3 in 1" comes with a couple of extra velcro straps, one of which I use as a retention strap. If I could modify the 7 full sweat I'd add such a capability.
Looking at ShotGunShanni modelling the "3 in 1" with thigh strap (mine came with ankle strap, which is smaller), I was thinking a thigh strap could be used to mount the holster under one's steering column with the holster underneath -- out of the way, but readily accessible. The full sweat shield holster would be better for such use -- another reason to add some velcro to it.
Skookum
-
Thanks Skookum. I'm reading reviews of the holster on some other gun forums and almost without exception, the reviews are very positive. Many are saying it is the most comfortable IWB they have or have worn. That's very encouraging.
Ok, so the Series 7 is good for the 82. There are two variations of the 7. One is "regular" and one is lower cut. Seems to me that might be a better choice (my thinking, at least) since it's more open and allows for a better grab of the gun itself for withdrawal. Any thoughts on that? Which one did you go with.
The sweat shield might be a very good addition. Something to consider.
-
Dan,
There are two sweat shield versions -- sweat shield and full sweat shield. I got the full sweat shield because I usually only wear one layer of clothing up top, unless it is winter. I need to change my attire -- e.g., start wearning undershirts or shirt jackets, then unless it is quite warm, I won't need any sweat shield as I'm in the Pacific Northwet.
In my Series 7 my trigger and trigger guard are fully covered; the mag release is exposed. The difference between the normal style and the Artemis cut (low cut) is minimal. I can't speak for any benefits of the Artemis cut, but I doubt it would make a difference in drawing, not for an 82. I can get all three non-trigger fingers around my grip, which is all I need to draw.
If you encounter any negative comments about Remoras I'd like to hear them. The worst I encountered was one fellow's rear sight snagged upon drawing, but Remora said send it back and they modified it ever so slightly to eliminate the issue. If that's as bad as it gets Remora can have my business all day long.
And, if you find the gal who models all the Remoras tell her to get a CZ and send her this way.
Skookum
-
Skookum, thanks for the great info. I looked at all three versions and found it hard to decide which would be best for me. Well the full sweat shield would ultimately be for a couple of reasons, but I'm looking out for my wife's eagle eye on my spending right now and it's going to be a tough sell for her right now with all of the spending I've been doing recently. ;D
Probably the regular cut would be just fine so no reason to consider the low cut version, I guess. As to the sweat factor, I never, regardless of weather wear an undershirt. Once I got out of the Army and no longer needed to do so, I have not worn one. I just don't like the feel of them. I know, it's something you get used to. Or not. So the skin contact issue is something to think about. That would apply to ANY holster and most don't have this feature. Living in Texas, the summers are pretty warm. Ok, "hot" is the word. I'm pretty average sized and within normal weight limits and don't have a tendency to be overly wet in hot weather. Unless it's very humid. Still, the contact of the gun all day might be good justification to put the small layer of insulation there.
No, I did not see anything I would call a negative in any of the reviews. A few made comments which really amount to just personal preference in what to wear for a holster. Nobody made any derogatory comments against it.
And yes, the gal modeling the various holsters in the video. Ouch. Might need some sweat protection after all if I watched that again. O0
-
Folks, ya gotta read this guy's review of the Remora holster. "Big Scare with New Remora Holster Today!" Found it on another forum. http://www.defensivecarry.com/forum/defensive-carry-holsters-carry-options/134542-big-scare-new-remora-holster-today.html (http://www.defensivecarry.com/forum/defensive-carry-holsters-carry-options/134542-big-scare-new-remora-holster-today.html)
O0
-
Now that's suspense writing!
-
Skookum,
I was just now looking at the tuckable version. I'm not sure about that and would like your thoughts. It would seem to me that practically speaking, there is no reason, since the standard holster does not have a clip system that even the regular model could not be worn tuckable. Often I wear my tee shirts untucked and they're loose enough to cover quite well. I know a lot of guys, I even see at church, wear regular button shirts untucked. I've never been in a habit of doing that. Likewise, I often wear polo style shirts with Dockers type slacks. The shirts are tucked in. It would see that the gripping capability of the holster would be such that just wearing it normally between the body and the waistband of the pants, that just adding the layer of the shirt tail between the holster and the pants waistband would work fine.
Also seems to me that one of the advantages of this particular holster, is it's thinner, more pliant design adding less bulk between the waistband and the body is offset by the addition of the extra flap of material and the clip attachment.
What do you think? Is it really worth going that way?
-
Sorry if this is a repeat on a previous page...but I just found this OWB Kydex set-up for a CZ82, in RH or LH:
http://www.strikehardgear.com/cz-and-makarov-holsters/ (http://www.strikehardgear.com/cz-and-makarov-holsters/)
--Otter
-
dan,
I haven't tried out my tuckable full sweat shield Series 7 yet. My left shoulder has been frozen (can't lift my upper arm above my shoulder) since January. I've found it easier to keep the pain in check with acetaminophen rather than face the dire pain of physical therapy. That's going to have to change soon, but for now I'm not tucking in any shirts.
I asked about the tuckable option when I called Remora. I was told the add-on wouldn't interfer if I chose not to tuck, and I could always send it back for a non-tuckable version. To tell you the truth, I'd likely just snip it off if I found I never used it. (A real man never asks for directions, nor does he return purchases.)
I'm going to have to modify my attire to accomodate carrying, but prior to my decision I was an everyday tucker, and I assume shirt tucking will once again be my norm (after I find the courage to dive into PT).
I punched some holes with my 83 today. One thing I noticed is that the option with the kydex strip in the rim would be nice for ease of reholstering, especially given my left hand can't reach my right waist to help given my arm. But, that's a range issue, not a concealed carry issue. The overwhelming number of days of CC don't involve one's pistol clearing the holster. I must say I am amazed at how comfy the "3 in 1" is, even while strapped into a car seat.
Skookum
-
Skookum,
Sorry to hear about the shoulder problem. Hopefully it can be corrected and return you to full mobility and freedom from pain. Yes, that can limit the ability to do a two hand reholster. Interesting to think about. You are right, the idea of CC is to never have to draw your weapon. That's the last thing you want to do but we certainly know that we have to be ready and willing to do so in the event it ever comes necessary.
Well the wear comfort fact is selling me. I don't think the 3 in 1 option is my choice but I have convinced myself that the full sweat shield version is the way to go.
-
Has anyone ever tried one of these? Versacarry. http://www.versacarry.com/ (http://www.versacarry.com/) I'm not sure if I like the idea or not. Some pros and cons I can think of. Just wondering if anyone has ever tried one for the 82/83.
-
Dan,
Have you by chance made up your mind on what holster you want to get yet?
Having recently taken my CHL course a couple weeks ago and currently waiting on the mailman, holster choices is something that I have been researching here lately. The Remora looks like a good option as it seems like a very versatile choice without having to spend a substantial amount of coin on a holster that I may not like. I have heard to many stories of people on the net as well as my friends who end up with a box full of holsters that they either can't wear comfortably or just didn't fit the gun properly. I'd like to stay away from being yet another, that seems to have a full inventory of useless gun leather that just takes up space.
-
I just ordered one of these (LH version):
http://www.ebay.com/itm/CZ-82-83-IWB-Hybrid-Leather-Kydex-Tuckable-Concealed-Carry-Holster-/170855963078?pt=LH_DefaultDomain_0&hash=item27c7cf19c6 (http://www.ebay.com/itm/CZ-82-83-IWB-Hybrid-Leather-Kydex-Tuckable-Concealed-Carry-Holster-/170855963078?pt=LH_DefaultDomain_0&hash=item27c7cf19c6)
This is almost an exact copy of the Tucker "The Answer" I have for my baby Glock. The Tucker is VERY good, so I hope this one works just as well. For $39 shipped, I thought it was worth a shot. I'll let everyone know after it arrives. I also picked up a cheap $15 Bulldog holster (works LH, RH, belt loop or clip) with the built in mag pouch as "general use" (not for CCW)...works just fine for it's purpose.
The drawback I see with the Remora is when you have to use the restroom and have to take care of the gun, then reposition when you are finished :-\
-
Received my Remora # 7 ART with full sweat shield today. The 82 fits quite nicely. I suspect that with wear the holster may form a little more to the shape of the gun. Not sure how that will affect the fit but if anything it may slip a little further down into the holster. Either way is fine. The whole thing, including the end of the handle is pretty well on the sweat shield so it's going to keep the metal off of my bare skin (I never wear an undershirt) and from the brief time I had it on today it felt fine. Quite comfortable. Drawing the gun was smooth. As others have mentioned it's pretty much a two handed reholstering but that's ok.
The sense of staying was good too. Prior to my receiving the holster I carried a few times with the gun just tucked down inside my waistband. That worked ok but I never felt that it was staying in place quite like I wanted it to. With the holster, it feels like it will.
Though I carried a few times at 3:30, I felt that the butt end might create a bit more of a "bump" visible on my shirt. So I moved it to 3 o'clock and canted it more. I think for my body shape that is going to work out best and puts the butt more against my side and thus less likely to protrude.
-
dan,
I am happy to learn you like your Remora. It would be interesting to compare our full sweats side by side to see what difference your Artemis cut makes. I assume you are happy with your choice and that the slight removal of material doesn't leave anything important exposed?
I have been doing the bulk of my carrying with my "3 in 1." (We are having a cool spring in the Pacific Northwet, so I am not yet sweating.) The holster does conform more to the shape of the pistol after a while. I haven't noticed a change in how the gun rides in the holster; just that the holster looks more tailored to the gun.
Some reviewers complained that the siliconized exterior of the Remora against the skin can cause a rash. One said it goes away after a few days of getting accustomed to the holster being there. Without a t-shirt has your skin objected?
Question: What is the cause of holster wear? I am having a hard time seeing how a full sweat Remora could cause any holster wear.
-
Skookum,
Since I received mine in the mail only yesterday and have not really been out of the house since, other than to briefly try it on, I've not yet been able to experience any of the wear. I am happy with it and rather than it seeming to be my jumping the gun and putting my stamp of approval on something I've not even used yet, I should qualify my claim of satisfaction.
The CZ82 fits nicely into the holster and all of it is "covered" by the extra material of the sweat shield. Thus that is a point of satisfaction. I understand that some guns have a little of the butt of the grip overhanging the edge of the sweat shield material. Though mine comes to the edge, it is still inside so it will still provide a bit of insulation between the metal and my skin.
When I stuck it inside my waistband wearing a pair of jeans shorts and belt, it sat there with a feeling of firmness. I had the sense that it would not move about, or at least if it did, to no extent as to be uncomfortable or insecure. When I drew the gun from the holster, the removal was smooth with no hint of any snagging and the holster did not move.
When I had it in this position, the flatness of the backing was in good contrast to the previous odd shape of the gun that I could feel. So instead of the previous feel conforming to the approximate shape of the gun, now there was just a flatness there which was not unsimilar to the flatness of my pants against the side of my hip. Though when I had carried the gun in this position before, though I could feel the shape which was in that spot was hard and irregular in shape conforming to the gun, at least for the short periods of time I wore it that way (maybe a couple of hours) I won't say that it was uncomfortable. I just sense that the more flat shape will be even more comfortable. I will be aware that something is there but it won't have edges and contours which over time my dig into the skin a little.
Obviously time and wear will say for sure how comfortable it is. As to skin irritating concerns, though that is certainly possible, I've never been one to be overly sensitive to such things so short of wearing it 24 hours straight, I suspect that it's not going to be a concern. Our weather here, though starting to get on the warm side, has not been such that sweating is much of a problem. My main area of sweating is face and forehead anyhow and unless I'm engaged in fairly heavy physical exertion I'm not prone to have a big body sweating problem anyhow. Were I living in a more humid climate such as around the Houston area (I'm in the Dallas/Ft. Worth area) or FL, then that might be more of a concern.
Tomorrow will be (or may be) my first chance to wear it out. I'm going to try, at least. Dress for church for me is "business casual" with a short sleeved knit polo style shirt over Dockers. In cooler times of the year it will be a long sleeved cotton button up shirt. In all cases so far the shirt is tucked. I would like to try the holster tucked in sometime but want to have more time to experiment here at the house first. I am going to try for pocket carry tomorrow. I'm going to see how it fits into the front pocket of typical Dockers type slacks. A lot of the men at our church wear their shirts untucked (I suspect I know why some do, of course) and though I always wear a casual tee untucked, I've not been used to wearing other type of shirts that way. So, I have some trial and testing to do yet before I can say I've found the best wear for me.
As soon as I have a chance, I will shoot and post a photo of the gun in the holster and that should help give a good feel for the difference in the cut of the styles.
-
Were I living in a more humid climate such as around the Houston area (I'm in the Dallas/Ft. Worth area) or FL, then that might be more of a concern.
I live in the Houston area, and the heat and humidity are definitely coming into play. Right now I'm still researching as I haven't yet received my CHL, so all I can do at this point is take in information and try to make a well informed decision.
A few days ago I picked up a Bianchi holster that is made for a Sig P232, Makarov, etc. (size 10)
(http://i53.photobucket.com/albums/g52/MH353/IMG_0421.jpg)
The gun fits snug but it seems to ride a little high. I have been wearing it around the house and so far it seems to be comfortable and I haven't noticed any printing when wearing an untucked t-shirt, but I would like to also find something that I can use that is more adjustable to how I want to carry it depending on how I'm dressed. The Remora looks like it may be what I'm looking for. What I'm curious to know is, is there any felt difference between the reinforced top and the original design. It just seems to me that the original might be a little more comfortable...IDK. To me, it seems that comfort and ease of drawing the weapon without snagging are most important. Re-holstering is something that really wouldn't bother me if I had to use two hands.
-
Skookum,
Since I received mine in the mail only yesterday and have not really been out of the house since, other than to briefly try it on, I've not yet been able to experience any of the wear. I am happy with it and rather than it seeming to be my jumping the gun and putting my stamp of approval on something I've not even used yet, I should qualify my claim of satisfaction.
At least you didn't gag when you opened the package. That's a promising sign.
When I had it in this position, the flatness of the backing was in good contrast to the previous odd shape of the gun that I could feel. So instead of the previous feel conforming to the approximate shape of the gun, now there was just a flatness there which was not unsimilar to the flatness of my pants against the side of my hip. Though when I had carried the gun in this position before, though I could feel the shape which was in that spot was hard and irregular in shape conforming to the gun, at least for the short periods of time I wore it that way (maybe a couple of hours) I won't say that it was uncomfortable. I just sense that the more flat shape will be even more comfortable. I will be aware that something is there but it won't have edges and contours which over time my dig into the skin a little.
Which is why I think the full sweat version is so popular -- no safety or mag release digging into you. Plus, your gun is protected from your dermal excretions.
My main area of sweating is face and forehead ... .
Good thing you didn't opt for the headband holster.
I carried my 83 today, while out running errands, in my "3 in 1" as an ankle holster for the first time. It conceals well under my Levi pant leg, but forget about it if you wear skinny jeans. I strapped it to the inside of my lower left leg. It rides best canted forward, and takes a while to get the pant leg down and around the rig. One won't set any fast draw records with this rig, but then the 83 isn't designed to be a pocket or ankle pistol. If bell bottoms make a comeback it'll strap on and draw much more quickly.
I found the position generally uncomfortable, but that may have something to do with my left foot being messed up -- shattered that heel several years ago. I will try it next time on the outer edge of my right foot.
-
Johnny,
When you say the gun rides a little high, do you mean that it rides high in the holster in that it does not seat as deep as you would like, or do you mean that because of the position of the clip, the whole thing sits higher on your waist than you would like? As to riding in the holster, to me it looks ok so I suspect you mean that the whole thing rides high on you.
Sort of a tough call as to preferences, I guess, and I don't know which is best. I see pictures of others with IWB's and some do sit lower while others look like this and apparently the users are quite ok with where they are. I am suspicious that body form may make a difference here with our own body shape.
One thing I like about the Remora is since it has no clip as a means of fastening, the cant and height position can be your choice.
-
Skookum, as soon as someone offers a headband holster, well......... Ok, never mind, LOL
I have thought that an ankle holster would have limited appeal. For a BUG perhaps, but outside of that access to it in an emergency would be limited. I think for car use, perhaps but while standing.... I suspect that if face to face with a BG, the act of bending down to reach the weapon would not be a good idea.
-
Johnny,
When you say the gun rides a little high, do you mean that it rides high in the holster in that it does not seat as deep as you would like, or do you mean that because of the position of the clip, the whole thing sits higher on your waist than you would like? As to riding in the holster, to me it looks ok so I suspect you mean that the whole thing rides high on you.
Sort of a tough call as to preferences, I guess, and I don't know which is best. I see pictures of others with IWB's and some do sit lower while others look like this and apparently the users are quite ok with where they are. I am suspicious that body form may make a difference here with our own body shape.
One thing I like about the Remora is since it has no clip as a means of fastening, the cant and height position can be your choice.
Dan,
What I mean is it sits a little higher than I prefer above my waistline. From the bend of the clip to the top of the sweat guard is 3.5 inches. I like the holster, as it fits my 82 like a glove...it just doesn't sit as low as I pictured it would. I'll definitely use it; I think it's just something I'm going to have to get used too. Concealed carry in general is something I'm going to have to get used too.
-
I have thought that an ankle holster would have limited appeal. For a BUG perhaps, but outside of that access to it in an emergency would be limited. I think for car use, perhaps but while standing.... I suspect that if face to face with a BG, the act of bending down to reach the weapon would not be a good idea.
I bought the "3 in 1" as a pocket holster. That it functions nicely as an IWB holster and might do for an ankle holster are plusses. I can't say whether it functions adequately for me as an ankle holster until I try it on the outside of my right leg. I agree that the best thing to strap onto your lower leg would be a BUG smaller than an 83. One advantage, I'm thinking, is that most folks don't focus on the lower legs of others (unless it is a bare and shapely female leg). I did note a small accumulation of lint on either side of the retention strap, and it was on my leg for only about an hour (with no socks). I've heard ankle carry is a dirty way to carry and especially hard on semiautos. I haven't noticed any lint accumulation while carrying IWB or in pocket.
-
Interesting thoughts about the vulnerability of small semi-autos to lint and debris in an ankle holster. A good argument for going with a wheel gun for that purpose. My thinking for a BUG has been something like a P64. Smaller than the CZ82 making it better for something like an ankle holster or even pocket carry but at the same time it uses the same ammo as the CZ82 simplifying ammo carry.
I've also been concerned with ankle carry is my klutziness is likely to result in a smacked up and bruised opposite ankle from banging the two together while walking or running. Who knows, :o
Speaking of pocket carry, I thought I would see how the new Remora holster with the CZ82 would fit in my pocket. It really does depend a great deal on the makeup of the individual slacks and pretty much rules out jeans. I wear jeans 95% of the time with the only alternative being Docker style slacks when jeans aren't appropriate. Getting all of the gun down inside just doesn't happen. Without the holster, I can angle it in slacks pockets reasonably well but it makes a pretty telling print. For jeans, I can't get the end of the grip quite hidden and since jeans are typically a little more form fitting than the looser dress slacks, it's not very comfortable. For some slacks (I hate Dickies and would never buy another pair) the pockets are too narrow to support even a smaller gun. Oh well.
-
I've read that a small wheel gun is the only thing to seriously consider for ankle carry because of the dirt factor. I would think a closed bottom holster would be essential for pocket and IWB carry to keep pocket and belly button lint, respectively, from clogging things up.
My front Levi pockets are just big enough to accomodate my 83, but a shirt needs to be draped over the pocket to prevent one from glancing down and seeing the rear of the pistol just below the top of the pocket. I've heard Duluth Trading's jeans have deeper pockets that should readily accomodate a compact framed pistol: http://www.duluthtrading.com/store/mens/mens-pants/mens-pants.aspx. I detest shopping for clothes, but will have to order a pair one of these days.
How are you getting a full sweat holster into your pocket? No wonder there is little room left for your 82. The "3 in 1" is much smaller. It covers the trigger and offers more of a rectangular bulge in the pocket than a tell-tale gun shape. Kind of looks like my fat wallet (unfortunately, not because it is loaded down with money) is in my front pocket.
-
Skookum, how much the entire sweatshield version of the holster fits down in the pockets depended entirely on the particular cut of the pats. For jeans (pretty much just Levies or Wrangler here) it didn't. I have put the gun unholstered in my pocket before and it did leave the top open and more exposed. With a long overhanging shirt tail it would work but not really be comfortable.
I tried it in the holster in a particular pair of Dockers style slacks Sunday morning. Outside of jeans, that's pretty much all I wear and especially for work trips and Sunday church. On this particular pair, the pocket was deep enough to accommodate the whole thing but left the opening of the pocket wide open and the butt of the gun was pretty much at the edge of the pocket opening so it was not well hidden. I do have other such slacks, which by the way tend to look looser in the frontal area because they may be pleated, which do have deeper and wider pockets. Others, on the other hand, may not be so generous of material in the pockets. So the ability to pocket carry this gun with the holster would be hit or miss.
Years ago when I first started my current job, knowing that rather than in the past where most of my customer on site time would be spent in scrubs, but now not so, and knowing that I'd often be down on the floor of a hospital sterile processing department or even their receiving department, I thought that Dickies slacks might be a good option. Well in addition to making me look more like the hospital maintenance man or a freezer repair man, they have some things about them I absolutely hate. The pockets of these pants, unlike the more dress style Dockers I'm more used to wearing, instead of being more square shaped with straight sides and flat and wide bottoms (talking about the insides) are very narrow and more V shaped. No straight bottom but rather it comes to a point. Worthless. Even carrying my wallet there from time to time is awkward feeling and I can't get nearly as much in those pockets as in regular pants. Those pockets would rule out all but perhaps a small wheel gun and that depending on the actual holster used.
I think for me, pocket carry is not in the near future and would only be viable with a different gun. I'm not going to give up my 82 (I like it too much) but I'm not ruling out alternates in the future. I think it's pretty much going to be IWB for me. That may have variances and this Remora will probably not be the only holster I buy. What others may be added to the mix, only the future and more experience with carrying will tell for sure.
-
I just ordered one of these (LH version):
http://www.ebay.com/itm/CZ-82-83-IWB-Hybrid-Leather-Kydex-Tuckable-Concealed-Carry-Holster-/170855963078?pt=LH_DefaultDomain_0&hash=item27c7cf19c6 (http://www.ebay.com/itm/CZ-82-83-IWB-Hybrid-Leather-Kydex-Tuckable-Concealed-Carry-Holster-/170855963078?pt=LH_DefaultDomain_0&hash=item27c7cf19c6)
This is almost an exact copy of the Tucker "The Answer" I have for my baby Glock. The Tucker is VERY good, so I hope this one works just as well. For $39 shipped, I thought it was worth a shot. I'll let everyone know after it arrives. I also picked up a cheap $15 Bulldog holster (works LH, RH, belt loop or clip) with the built in mag pouch as "general use" (not for CCW)...works just fine for it's purpose.
So here are some pics of the eBay holster from Bayou:
(http://i153.photobucket.com/albums/s238/ottergt/Guns/DSC02725.jpg)
(http://i153.photobucket.com/albums/s238/ottergt/Guns/DSC02724.jpg)
My impressions are:
Very comfortable, conceals well, fast draw.
Clips are good quality metal, easy on/off.
Adjustable for tension and cant/height (3 holes on each side).
Tuckable.
Compared to Tucker's "The Answer":
This has no backing on the leather like the Tucker does.
Leather is a cheaper grade.
Leather isn't finished off as nicely.
Much faster lead time (he had my LH made on special request and it arrived within 5 days of the order).
Much lower cost...I think my The Answer was around $130+ when I ordered it a few years ago. This one was $39 shipped.
Will this one hold up to daily carry over many years? Don't know. Is it a good value for the $? YES! I don't plan on my 82 as my daily carry gun, but I wanted something that would work really well if I wanted to carry it but not be cost prohibitive. I'm very happy with it.
Here are pics of the "general purpose use" holster I wanted (Bulldog brand).
(http://i153.photobucket.com/albums/s238/ottergt/Guns/DSC02730.jpg)
(http://i153.photobucket.com/albums/s238/ottergt/Guns/DSC02729.jpg)
It has a clip for IWB, but I don't think these types of holsters do that job well for everyday carry. I suppose you could move the clip and use it for OWB, instead of the sewn-in belt loop.
The gun fits well, but does sit a little deep and the cut of the holster doesn't allow for a "fast draw". But again, I just wanted this for general purpose "range/field use" so speed wasn't a top consideration. I like having the extra mag built in as well for this use, and the CZ 82 mag fits well. Retention with the thumb snap is good. I have similar style for a 1911 made by Gun Mate, and wasn't impressed with the Gun Mate quality...The Bulldog is much better quality. For $15, it looks like it will work just fine. (There are other brands that make this style too...Soft Armor Compak, Blackhawk...that are probably a little higher quality in the $20-$30 range.)
--Otter
-
Hi im new to this site and am planning on refinishing my cz82. I saw some of the pistols that people on this sire have done and they look fantastic. I only hope mine comes out that good. But anyways any advice would be much appreciated.
-
Bigshooter, welcome to the forum. There are a number of options you will have with refinishing. You will likely hear a lot of comments from folks who have used the various options for refinishing. I myself did a rust bluing of my CZ82.
-
I just ordered one of those Remora holsters (7 with full sweat guard, right handed). Everything I read sounded really good. I'll post pics and reviews once I get it and put it through the gauntlet!
-
john,
I am confident you won't be disappointed.
I packed my 83 the other day in my "3 in 1" (still not warm enough to cause my to sweat) in my waist band. I found myself how pleased I was with the flexibilty (i.e., ability to position in different places and with different cants), comfort (it's easy to forget it's there), and security (it doesn't budge).
I like to carry my wallet in my right rear pocket, but decided to switch to my left rear pocket so I don't flash my gun when paying for something.
-
I carried mine this last week for some extended periods. We made a driving trip from home in the Dallas/Ft. Worth, Texas area to Orlando, FL for our Disney World holiday. That involved two days of driving at about ten to twelve hours each. I wore the Ramora with the full sweatbanc at about 3 O'clock. That seems to be the best for me. Wearing it any further back, toward 3:30 gives me the sense that the butt may protrude out just a little too much. Seems to lay flatter against my side if it rides just a little forward.
On the other hand, even forward just a little, though the butt may lay flatter against my side, it seems that the top corner which goes over the hammer area may create a slight protrusion. The more I can cant the whole thing and the more I can align the open edge to the front corner with my belt line, the better it is. This is with my experience with shirts and tees which though loose, may not be as blousey as they could be.
I wear my Blackberry holster at about 1:30 and that device creates a bit of a bulge which actually helps because it does help obscure anything else which might bulge out. I tried a couple of times wearing the phone at 10:30 thinking that would create a countering bulge so that I don't seem so lopsided but decided that the 1:30 position is going to be best.
Honestly I do not believe anything is showing but rather my slight insecurity with the new experience causing me to be more sensitive to the presence of the holstered gun. I am sure it is not anything anyone is going to notice but just that I am still overly sensitive to it. I think I would find exactly the same thing with any other holster so I think the Remora is doing its job quite well.
As for comfort and ease of wear, I too normally carry my wallet in my right rear pocket and getting to it without exposing the gun does not look to be a problem. On long drives I do move it to my right front pocket since sitting on the wallet for several hours causes a real pain in the butt, if you know what I mean, LOL. The position of the holstered gun, at about the 3:00 or even close to the 3:30 position while sitting in the driver's seat for extended times is sufficiently comfortable. At times I forget that its even there. When I do feel it, it is not a discomfort. Just a reminder that it is there. So I can vouch for the comfort level.
As we were spending the week at the theme parks, I did not carry it there but left it locked in the car. So to this point I don't have experience at walking around and standing with it for longer time periods. I did note that though the humidity level in that part of the country is very high and I did sweat a lot, that was mostly head and face sweat. I felt of that area on my side a number of times and hardly noted more than the slightest of dampness. My shirts don't get wet in that area. That is not ruling out sweat, of course, since even dry feeling skin is going to secrete a little salty moisture. So were I wearing the holster while out in that environment I suspect there might have been more felt moisture. Probably not that much though but enough to be grateful for the the layer of protection between my skin and the gun itself.
Bottom line, I think the holster is going to live up to my expectations.
-
Hey guys,
According to Matt @ Crossbreed, the SuperTuck for the CZ-83 will fit the 82 if you follow their "remolding" instructions..
There is also a guy in SC that makes IWB "supertuck-ish" holsters WITH a combat cut for half the price. He uses horse-hide in all his holsters & gives a 2-week money-back warranty.
His holsters run about $50 plus shipping.
He is starting some for the CZ-82, I'll post pics & a write-up when I get mine.
-
Hey guys,
According to Matt @ Crossbreed, the SuperTuck for the CZ-83 will fit the 82 if you follow their "remolding" instructions.
What does remolding consist of?
-
Like This
http://www.ebay.com/itm/170868594062?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
-
What does one do to remold a kydex holster? Heat it?
-
Yes.
-
The Remora holster is every bit as good as I've heard. Fits the CZ-82 like a glove and everything stays right where you put it!
(http://dl.dropbox.com/u/5773160/Photos/2012-06-30%2020.52.57.jpg)
(http://dl.dropbox.com/u/5773160/Photos/2012-06-30%2020.53.09.jpg)
(http://dl.dropbox.com/u/5773160/Photos/2012-06-30%2020.53.21.jpg)
-
john,
Thanks for posting the pics. It appears that the artemis cut gives you access to the magazine release while not exposing the trigger.
-
Yes, John, thanks for posting the pictures. I just shot some of mine which is also the Artemis but in the full sweat shield version. I'll post them shortly. Looks to me like the cut of the front edge, though both are stated as the Artemis, is a little different if the configuration is the full sweat shield version. Yours looks a little lower, actually exposing a little more of the trigger guard than mine does. They're close but yet mine looks to be slightly higher. Or maybe you don't have your 82 settled down quite as deep within the holster as mine is. If your holster is brand new and not been worn much yet with the gun in it, you may find that it will settle down just a little deeper as the material forms to the shape of the gun. Or at least that looks like what happens and may explain why mine looks like its setting deeper.
-
Here are the photos of mine.
The butt of the gun does protrude just a bit beyond the edge of the holster sweat shield but because of the material, there is some separation between it and my skin so it's nothing I feel.
(http://www.dooleystreasurechest.com/downloads/remora_6694.jpg)
(http://www.dooleystreasurechest.com/downloads/remora_6696.jpg)
When I was shooting the pictures, I did not think to make one at the angle I have been wearing it at so I rotated the cropped image here but I think you'll get the idea. I cant it so that the top edge of the front opening is about level and parallel to the top of my belt line. Though that makes it a little taller in the ride, it makes it somewhat more narrow and thus avoids (or I hope so at least) the wider profile which might be more revealing via printing under a loose shirt. At least that is the intent. Otherwise, the end of the butt seems to stick out toward my back. That is even with my usual wear position of 3 o'clock. I've tried it further back at about 3:30 to 4 o'clock and it's more uncomfortable. Especially while driving. It also seems to stick out more. Perhaps my imagination but I think it really does.
(http://www.dooleystreasurechest.com/downloads/remora_6690b.jpg)
BTW, mine is NOT the reinforced top. Looking at the pictures of John's which is, doesn't seem to be that much difference. Perhaps it is stiffer so stays open more? Not sure. I'm satisfied with the way mine sits though.
I've got to do something about replacing those grips. >:( My wife and I have been looking at wooden grips and that is the intent. Just been spending too much money on various projects lately so it will come but not right away.
-
That holster you made Mr hayfield looks great. It is tricky to find just what you want.
-
Here are the photos of mine.
The butt of the gun does protrude just a bit beyond the edge of the holster sweat shield but because of the material, there is some separation between it and my skin so it's nothing I feel.
(http://www.dooleystreasurechest.com/downloads/remora_6694.jpg)
There is probably no ONE perfect holster. At least not perfect for everyone. So after some time of wearing the Remora, what are my nits? As to the matter of comfort. Still nothing so far. For stationary wear, that is, not walking around a lot, as long as I keep it at 3 O'clock, I feel no discomfort. If I move it back a bit, after more extensive walking I can feel a little more rub. I would not take that as meaningful to everyone for our bodies are all made differently and what applies to me would not necessarily apply to anyone else. Were I to wear it on a long trail hike, I think keeping it a little forward would work best. For the most part I've worn it with jean shorts and a pretty substantial belt. No problem. As the weather cools, the jean shorts will give way to long jeans and the feel may be a little different. I have not yet worn it with regular "dress" slacks though I have tried it out here at home and it feels fine.
As to concealability, the particular model I have may not be the best. It's a small thing, but the area of the material over the top of the slide, especially that area where it folds over the top of the rear, over the hammer, adds additional "height" to the pistol. It seems to make the profile that of a somewhat larger pistol and creates a bit of a bump pushing the belt and thus the pants outward a bit in that area. This is especially more when I wear it canted forward more and low under the belt. The "bend" in the material over the hammer makes the whole thing wider and since that is not going to lay flat against my body and conform to the curve of the hip, so to speak, it tends to cause the belt to bulge out more at this point. No, a stronger belt would make no difference. Cinching it all in tighter would just make for an uncomfortable wear. With a loose tee shirt or other shirt hanging out, the problem is pretty much taken care of for me as I wear my Blackberry in its holster on my belt just in front of the gun holster. That creates its own bulge in my shirt and thus hides any additional bump which might otherwise be visible.
I don't know if this will be noticed by anyone else using this cut of the Remora holster. I have not tried any other style of IWB holster so I have nothing to compare it to for my own wear so I don't know if anything else would be different. I'm not intending this point to be a complaint. Just an observation. Whether it is a factor in anyone's decision to try this holster, I would hope that they would rely on a number of user reviews, and not just this one. I am quite satisfied with the holster and I think it's advantages will outweigh the minor points I've noted.
-
For you Remora holster users, especially any who are using the full sweatband version, I'm posting a series of pictures here and would like some opinions. Looking at some of the other pictures I am questioning the cut of mine compared to the others and wonder if I should contact Remora about possibly getting mine modified.
In particular, the top front of the holster where the material folds around from the back side to the front looks to be higher or sharper cornered than some other pictures I've seen. I know the difference is the sweat shield on mine but I the pictures of the one johnb007 posted, though not the full sweat shield version looks to be cut lower in the front and the top corner (over the hammer) is sharper and not rounded down on mine. Mine is supposed to be the Artemis as well and the paperwork which came with it says it is.
The pictures here show it in use. Let me know what you think.
(http://www.dooleystreasurechest.com/downloads/remora2.jpg)
(http://www.dooleystreasurechest.com/downloads/remora3.jpg)
This one is without the holster, without any holster. Just tucked down inside the waistband. There is some protrusion of course but the holster seems to add to that protrusion. How much the holster is increasing the "bulging" affect, I'm not sure.
(http://www.dooleystreasurechest.com/downloads/remora4.jpg)
There is more affect on the bulge affect seen here compared to the picture above. I realize that any holster will add some bulk but I wonder if this is more than I might see with a different type of IWB holster.
(http://www.dooleystreasurechest.com/downloads/remora6.jpg)
(http://www.dooleystreasurechest.com/downloads/remora7.jpg)
(http://www.dooleystreasurechest.com/downloads/remora9.jpg)
As I mentioned in my previous post, when I wear an overhanging shirt and especially with my cell phone clipped onto my belt in its normal position which is just in front of the the holster location (just behind the belt loop shown) the bulge of the cell phone disguises the bulge of the front of the gun/holster.
Does this look reasonably normal for a fit?
-
Good deal. I'm glad ya got a holster that you like.
I bought one for my CZ75B form this seller on eBay. It was a tight fit when it was new. Though it has loosened up some, it is still very secure. I may try the one he sells for the Bersa for my CZ82.
http://www.ebay.com/itm/IWB-Kydex-Leather-Hybrid-Holster-CZ-75-P-07-/280874414611?pt=LH_DefaultDomain_0&var=&hash=item41656b7213
-
thanks for the info guys and gals..
I current carry it in a (IWB) Don Hume H715-M no.55-45(I think its for a 4" 1911 Taurus).. works well, holds ok, thou you have the work the leather a little.. has a reinforced top, belt clips is ok.. a bit hard to attach on bigger belts.
but the hammer and beaver tail hit me in the side more then I'd like. So I'm looking at those nice Remora holsters 8)
I'm thinking of getting the Remora # 7 ART "RFT" with a regular sweat shield or a Remora # 10 ART "RFT"
Questions for anyone who has one... does the #7 with sweat shield cover the beaver tail and hammer?
or should I just get the full sweat shield.. as I can see by danwdooley pics (thank you sir) it does cover.
don't think I need the full since the butt of the pistol rubbing against me is ok but i'd like the hammer not too..
or get the #10 .. which is bigger and looks like it would cover the pistol more.
oh well, decisions, decisions.. ;)
ohh and looks like there having a holiday sale.. 10% off the entire order ;D
M-
-
In my search for a holster, I found http://www.cdnninvestments.com/cz82behofa.html (http://www.cdnninvestments.com/cz82behofa.html). It is in the shape described and arrived fairly quick.
-
I really like the Milt Sparks Summer Special holsters, but I haven't been able to find one for a CZ83. High Noon Holsters makes a very similar model and I'll be ordering it next week. It's called the "Hideaway" and is available for a CZ82. I figure I'll soak it in water, insert my 83 in a baggie in the holster and let it dry.
Link: http://www.highnoonholsters.com/Product_Line/_Hideaway_w-strap/_hideaway_w-strap.html
-
OH...this looks very promising as I like kydex when training! Nice...
Sorry if this is a repeat on a previous page...but I just found this OWB Kydex set-up for a CZ82, in RH or LH:
http://www.strikehardgear.com/cz-and-makarov-holsters/ (http://www.strikehardgear.com/cz-and-makarov-holsters/)
--Otter
-
I'm debating on a new Crossbreed holster for my 83. Can't decide between the SuperTuck Deluxe or the QwikClip as an IWB holster. Anyone have either or both? Looking at comfort and concealability.
-
Personally, I think the Super Tuck is more comfy, since it distributes the weight across more area. The leather backing kind of hugs your hip as it wraps around.
-
STONER 415. Great IWB. Order direct from Stoner, otherwise you don't get to select all of the options available.
-
I just won a CZ-82 on gunbroker that came with a DeSantis D9 IWB holster. It does fit pretty good in it; although, I will probably look into getting a Crossbreed to replace it. I also just purchased and received a surplus CZ-82/83 shoulder holster from the CZ-USA website, so they are in stock if anyone is interested in buying one. I am currently letting my 82 rest in the stock to help break it in and it was a bit of a struggle just to get it to fit in. I guess I should have expected it from how long it has probably been sitting in surplus, but I was surprised by it. Did anyone else have trouble getting your 82/83 in the holster?
-
I just ordered the strikehard gear cz82 combo set...I'll let you guy's know how it feels/works when I get it and wear it for a week or so. 8)
-
I bought two of the shoulder holsters from CZ-USA. They were extremely tight - in fact I couldn't fit the CZ-82 into them at first. I dampened the leather inside and outside with some warm soapy water using glycerine soap which was recommended on another site. This allowed the leather to stretch some. I wrapped my gun in a plastic shopping bag and put it into the holster and then let the holster dry with the gun inside. Holster formed around the gun and fits perfectly now. Did not darken the leather.
I also bought a DeSantis Gunhide Dual Carry holster model 032BAE1Z0. It fits the CZ-82 very well. I like the idea that I can use it for conceal carry inside the wastband or open carry outside the wastband.
-
I poisted this in another blog...
"I bought a Don Hume 721 no. 31 (maybe a no. 3 with a leather stamp error) off Ebay for my CZ83. It was designed for a Beretta 84f (round trigger). I wasn't sure if it would fit, but the price was right so I took a chance. The Beretta's trigger guard must be a tad smaller than the CZ83's, so I took an exacto knife and cut few stitches to accomidate the larger trigger guard. Viola! Nice snug fit. Fits sooooo sweet, thumb break fits perfectly, too. I dabbed a little superglue on the cut area to prevent loosening / unravelling.
I don't think I'd spend $63 for a new Don Hume and then turn around and cut on it, but I think I only paid about $25 so it was worth the gamble. Works very well for me.
Possibly some other pancakes fitted for a Beretta 84f would work too (with minimal modifications).
-
new to the group, but when it comes to holsters Crossbreed is the only choice for me. I waited for a while to get my hands on a 82 and then went through several different holsters. got the super tuck 9 10 months ago and would give up every holster i own before letting it go. The 82 is my primary carry gun for a couple of reasons but that is for another topic line. If i have pants on , I have the super tuck on. I have had to sleep with it on. It is the most comfortable holster I have ever owned. BTW I don't work for Crossbreed.
-
Bought this one on ebay. http://www.ebay.com/itm/251215972151?var=550209437880&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Was planning on selling my Glock 36 and carrying my 82 until my P07 came in. Was worried about weight being an issue, but running it at about two o'clock iwb, no problem. Wish there was a kydex extension that kept the hammer out of my skin, but I can live with it, just wear an undershirt.
-
Anyone use a fobus mak paddle holster ?
http://www.amazon.com/Fobus-Standard-Holster-Micromax-Makarov/dp/B0000VN0CE/ref=cm_cr_pr_product_top
-
when it comes to holsters Crossbreed is the only choice for me.
The Crossbreed does look comfy. A couple of concerns:
- Does the Kydex raise havoc with the pistol's finish?
- Don't the visible belt clips scream "Gun!"?
-
I normally wear it at about 3:30, over a t-shirt with an over shirt. I have from time to time had to do the tuck-in. Need to look good for the wife. one time has anyone noticed and said anything. Like I said if I have pants on I have it on. I have more people notice the knife clipped to my back pocket.
-
I got a FIST#1 forward cant with loops. $96 shipped to my front door. Hardly know I have it on most of the time. Very high quality. I only see clips for that one on the site now. Order to delivery was 7 weeks. I ordered one for a CZ 82 cause I have a polsurp 83
-
I have a fobus for my compact and would like to find a fobus that would fit the 82's. Is there one that would fit?
-
I have a fobus for my compact and would like to find a fobus that would fit the 82's. Is there one that would fit?
It is my understanding that most holsters that will fit a Makarov will fit the '82. There are a few listed here:
http://www.fobusholster.com/index.php?p=catalog&mode=search&search_in=all&search_str=makarov&x=0&y=0
Maybe some readers here have personal experiences with these models?
-
I Open Carry my CZ every day in a fobus paddle holster, a c-21B. it is comfortable, easy on and off and has adjustable tension. Nice holster, I have several.
-
Has someone tried the Alien Gear holster.
I was wondering if the makorov model would fit.
I want to get one of these, the reviews have been great.
http://aliengearholsters.com/index.php/search-by-gun
-
Price is great! You may have to call them and ask what would fit. Maybe one for a the Beretta would fit
-
I was hoping not to be the guinea pig, LOL. I want to get another for my G17, seems like great quality and service. I may give them a call on Monday.
-
I Open Carry my CZ every day in a fobus paddle holster, a c-21B. it is comfortable, easy on and off and has adjustable tension. Nice holster, I have several.
Picked up one of these holsters last weekend. I was a little disappointed at first until I realized the"adjustable tension". Fits real nice. Thanks for the tip.
-
My reply from aliengear
"Unfortunately, at this point in time we do not offer a holster for that pistol. However, we are constantly adding new product and may offer this in the future. Please let us know if you have any other questions.
Have a nice day!
Cassie. "
The Makarov one might work but maybe if a couple of you inquire about a CZ82/82 they will make one.
-
I have a fobus for my compact and would like to find a fobus that would fit the 82's. Is there one that would fit?
It is my understanding that most holsters that will fit a Makarov will fit the '82. There are a few listed here:
http://www.fobusholster.com/index.php?p=catalog&mode=search&search_in=all&search_str=makarov&x=0&y=0
Maybe some readers here have personal experiences with these models?
(http://i1093.photobucket.com/albums/i425/jabski1/P1270089_zps72015a06.jpg) (http://s1093.photobucket.com/user/jabski1/media/P1270089_zps72015a06.jpg.html)(http://)
I'd say yes.
I had Eric at hbe make an iwb pro for my Makarov years ago. I sold the Mak, and while speaking to him on the phone about another one I was ordering, mentioned to him that I had sold it. That's when he told me how well they fit the CZ 82. After I got off the phone, I tried it, and it was a great fit.
Unfortunately, I sold the holster back when I had considered selling the 82. Wish I still had it!
-
For my CZ-83, I use a Bianchi #6 ATB (adjustable thumb break) IWB suede holster. I got the one for the Walther PP and SIG, though I had to snip several extraneous stitches because of the larger CZ-82 style trigger guard. Works well under an untucked T- shirt. The one Bianchi lists for the 82/83 is too big. It sits too deep, and and does not holt it securely.
-
I bought one of the Desantis Dual Carry holsters that are pictured above. I really like it.
-
I may have found the perfect fit for the 82. This guy is local and I plan to drop off a CZ 82 in the next week or so. He said he can make a holster to fit the gun with no problem. He does not list the 82 on his website but Im taking mine to him. All holsters are made out of Kydex and all he will do is mold it to it. I will ask him about making more for everyone here and let him know that a holster for the 82 is hard to find. If others are interested let me know and I will ask him to keep a mold of my gun for us CZ 82 owners and let him know that there is a market
http://www.cooksholsters.com/
-
laserdoc,
Take one for the team and just give him one of your four 82s to use as a mold. After all, an esteemed constitutional scholar recently said: "I think when you spread the wealth around, it?s good for everybody."
-
I just got this IWB holster from Turtlecreek on ebay that is made specifically for the CZ-83. They also make a version for the CB-82 with the rounded trigger. Mine seems to fit the CZ-83 like a glove but is a little stiff so needs more break-in time. Made in the USA from quality leather. Price was around $55 with free shipping.
I don't know of any other non-custom holster manufacturers that currently makes IWB holsters specifically molded from both the CZ-82 & 83. If anyone knows of any other, please let me know as I like to keep my options open!
(http://i1231.photobucket.com/albums/ee513/Chrisl383/DSC00072_zpsa18c586a.jpg) (http://s1231.photobucket.com/user/Chrisl383/media/DSC00072_zpsa18c586a.jpg.html)
(http://i1231.photobucket.com/albums/ee513/Chrisl383/DSC00071_zpsa4b36784.jpg) (http://s1231.photobucket.com/user/Chrisl383/media/DSC00071_zpsa4b36784.jpg.html)
-
Hope y'all don't mind, I'm throwing in my 2 cents.
Blue Stone Holsters, IWB, "The Distributor Holster" Model
I'm able to use it for both my CZs. Very comfortable to wear all day. Pistols ride high and muzzle does not dig into body. At the 2:30 position, in and out of car all day is no problem. I found this holster has least amount of down pull on belt.
http://www.bluestonesafety.com/products/holsters/
-
www.Strikehardgear.com (http://www.Strikehardgear.com)
I purchased the CZ-82 combo. It's my EDC.
(http://cdn2.bigcommerce.com/server1800/7dc17/products/45/images/348/CZ82_Holster_customer1__03264.1373036823.1280.1280.jpg)
-
Been using this N82 Tactical holster as my EDC for about 8 months now. Super comfortable. Sorry for the poor image.
(http://i.imgur.com/VuwrMNY.jpg)
http://n82tactical.com/n82store/?page_id=3014
-
+1 on the N82 Tactical holster, so comfortable.
-
I stumbled upon Winslow Customs, which is customizing CZ 82s:
(http://www.customwinslow.com/images/gunPics/L_8kuNYo4tRd.jpg).
I noted the custom-built UGB holster for the customized 82. This surprised me, because I obtained a UGB Regulator this spring for my 75 Compact and like it very much. I wanted to get one for my 83s, but the 83 is not a listed gun.
I checked UGB's website today, and confirmed that neither the 83 or 82 are listed. I e-mailed to ask if they are now making holsters for the 83, and was pleased to hear quickly that they are.
I just placed my order for a Regulator for my 83s, and two matching Side Snap mag pouches.
This is a great, comfortable, convenient, and affordable holster.
-
Tried finding UGB holsters and found better luck with this link. http://www.ubgholsters.com/
I am still using my Fobus paddle holster. It has been several years now of daily use in sun, rain (I live in Wa State), heavy fog and I open carry when on my motorcycle. Actually, I open carry all the time so that little sucker is out in the weather all the time. I did wear out the paddle part on the last holster tho. Daily wear,eh? The holster works for me and the prices are great if you look around a bit. I paid in the low twenties w/shipping from Israel.
-
Any thoughts on a military holster?
-
Any thoughts on a military holster?
The CZ 82 typically comes with its stock ambidextrous military flap holster. They can be found online. There are polsurp black OWB holsters the fit the 82 and the 83 with rounded trigger guard.
Milsurp holster is tan; the polsurp holster is black:
(http://www.gunandgame.com/forums/attachments/powder-keg/18993d1235520878-surprise-my-latest-cz-82-cz82-holsters-004.jpg).
-
I stumbled upon Winslow Customs, which is customizing CZ 82s:
(http://www.customwinslow.com/images/gunPics/L_8kuNYo4tRd.jpg).
I noted the custom-built UGB holster for the customized 82. This surprised me, because I obtained a UGB Regulator this spring for my 75 Compact and like it very much. I wanted to get one for my 83s, but the 83 is not a listed gun.
I checked UGB's website today, and confirmed that neither the 83 or 82 are listed. I e-mailed to ask if they are now making holsters for the 83, and was pleased to hear quickly that they are.
I just placed my order for a Regulator for my 83s, and two matching Side Snap mag pouches.
This is a great, comfortable, convenient, and affordable holster.
Not too many holsters out there specifically molded for the CZ-82/83, and this one looks like a real good one. I plan on ordering one of these, but you seem to make a distinction between the CZ-82 and 83. Is this because yours has the squared trigger guard like mine?
-
Yes, both my 83s have squared trigger guards. I specified this in my order.
-
This fellow has several different Kydex configurations for the 82/83.
The "Black with 1.5 inch belt loop" is on my eBay wishlist!
http://www.ebay.com/itm/CZ-82-or-CZ83-Custom-Kydex-Holster-IWB-OWB-/251290118885?pt=LH_DefaultDomain_0&var=&hash=item3a820eeae5 (http://www.ebay.com/itm/CZ-82-or-CZ83-Custom-Kydex-Holster-IWB-OWB-/251290118885?pt=LH_DefaultDomain_0&var=&hash=item3a820eeae5)
-
I found 2 holsters in my holster box that fit the CZ82. The Minotaur Gladiator Holster (OWB) designed for the Kahr CW40 and the Bladetech (IWB) kydex holster designed for the 1911 either 3" Defender or 3.5" Officer (also fits Kahr CW40). Both holster have adjustable tension screws and make excellent carry rigs.
-
http://dmbullardleather.com/1429711.html
D.M. Bullard in Azle, TX (immediately west of Fort Worth) has holsters that are nice. CZ83 is on his gun list.
-
Another +1 on the Nate Squared holster (N82). Comfortable, well-made, I love mine. Several of my pistols fit, but my carry is now the CZ83.
-
Remora must have updated their site since the last time I visited; the menu selection by make and model now direct CZ83 owners to the Series 10. I have one for my P225, and this does not fit my CZ82 as well as I believe the Series 7 with full sweat shield would.
-
11 pages and yet only two individuals seem to use shoulder holsters. I guess I make three. After purchasing literally two large boxes of holsters I decided what I liked about each. From there I made my own. First couple of attempts looked like something from a grade school summer camp project. I got better. Not enough for resale but not ashamed to be seen (after all it is CONCEALED) carry. Best pattern was from Ebay as a Walthers Scandinavian police Investigators model. I have since duplicated the harness and added the same style holster for my 82, and 45. So now I have 3 shoulder holsters, 3 IWB, 1 pocket and sold two large boxes of holsters I wasn't happy about.
-
I personally like shoulder holsters, esp in the winter when i wear a coat or am driving long distances. I use a cheapo CZ surplus shoulder holster I dyed black, works for me..
-
Sorry if this is a duplication but I don't have time to find 2 posts in 11 pages for shoulder rigs. Spotted this on Amazon this evening and thought I'd share it, as it appears to be a good deal. Read the reviews, it sounds like some tailoring of elastics may be required to fit you. For $25 with shipping, I can do some handy leather crafting and stitching.
http://www.amazon.com/Leather-Holster-Makarov-Models82-Shoulder/dp/B00IHINE6E/ref=sr_1_3?ie=UTF8&qid=1423795730&sr=8-3&keywords=cz+83+holster
Oh, I have no affiliation other than just purchasing one. Just thought that with only a dozen left that the fine folk on this forum should have a crack at them.
-
The Desantis 032 isn't formed at all, and a bit loose with the 83 with squared trigger guard. So I tried it with a compact, nice fit but 3/8" sticks out the bottom. P-06 only a quarter inch sticks out and a bit snug but with some wear in should be good for it too.
The belt clip is adjustable and removable for slimmer OWB profile.
It's a good holster for the price. I may add a few stitches to snug it up on the 83 if wear in makes it any looser.
-
Picked up the Tempest Crossfire 2.5 and it fits great and very comfortable
http://crossfiregear.com/holsters/semi-auto-pistols/tempest-carry-holster.html
-
I got the holster James Bond used for his Walther P99 (http://www.jamesbondlifestyle.com/product/vega-ib339-holster) in Casino Royale (2006) and his Walther PPK (http://www.jamesbondlifestyle.com/product/vega-ib339-holster) in Skyfall (2012). They make the same holster for the CZ-83.
The CZ-83 model is the Vega IB331 (http://www.vegaholster.com/prodotto/303/inside-suede-belt-holster).
-
Gun Glove Holster fits my cz-82 like the glove...
(http://img.photobucket.com/albums/v356/travinh007/Pistols/PA191328.jpg)
-
That Gun Glove holster is the butt forward for left hand cross draw? Do you need to go up a size in your pants with it?
-
Here is my CZ-83 (squared trigger guard) with the IWB and OWB holsters I got for it. The IWB is by Turtlecreek and they are the only manufacturer I know of that makes leather IWB holsters molded from the actual gun in both squared trigger and rounded trigger (CZ-82) models. I have been carrying it at the 4 o'clock position and it's very manageable. I can carry it for up to 6 hours before it starts to get a little bothersome, but not to the degree that I wouldn't want to continue carrying it. I'm sure as I get more used to it and the holster breaks in it will get even easier. I got it off of ebay and they are still making them although they may not be listed under the specific CZ models.
The other holster is an OWB, butt forward design with retainer strap I got off of ebay from a Russian seller (no brand name). I don't anticipate I will be carrying this OWB much but it's nice to have options. Both holsters are all leather, well made and reasonable priced.
(http://i.imgur.com/6TIJJPm.jpg)
(http://i.imgur.com/G7pVdbn.jpg)
-
Plus one for Gun Glove Butt Forward IWB!
(http://i247.photobucket.com/albums/gg134/imarangemaster/IWB_zpsotekfhik.jpg) (http://s247.photobucket.com/user/imarangemaster/media/IWB_zpsotekfhik.jpg.html)
-
The new Urban Carry Holster (http://urbancarryholsters.com/holsters-45/original-urban-carry/urban-carry-holster-brown.html) is available for the CZ-83. Interesting new concept for an IWB holster. The entire firearm sits below the waistline, but the top tab allows for fast, easy access.
(http://urbancarryholsters.com/media/catalog/product/cache/1/image/800x1040/9df78eab33525d08d6e5fb8d27136e95/o/u/outline_holstered_2.jpg)
(http://urbancarryholsters.com/media/catalog/product/cache/1/image/800x1040/9df78eab33525d08d6e5fb8d27136e95/o/u/outline_drawing_2.jpg)
-
But have you seen the video of the guy using the Urban Carry and spitting his pistol completely out of the holster and onto the floor?
-
Gun Glove Holster fits my cz-82 like the glove...
(http://img.photobucket.com/albums/v356/travinh007/Pistols/PA191328.jpg)
The seller included one of those when I bought their CZ-83. I was wondering who made it.
-
Attached an Uncle Mikes generic shoulder holster to a Galco Classic Lite shoulder rig...works quite nicely... BTW...I'm a lefty...
-
There's a cheap Viridian holster that fits it perfectly. I think I got it in one of the r/gundeals posts
-
Just picked up a holster aiwb from these guys
http://miholsterco.com/shop-all/iwb/ (http://miholsterco.com/shop-all/iwb/)
Probably should have posted pics
(http://i6.photobucket.com/albums/y211/MetalGravy/CZ82/20180602_1205431_zpsj8s1lk7b.jpg)
(http://i6.photobucket.com/albums/y211/MetalGravy/CZ82/20180602_1205551_zpswqj0s2cz.jpg)
-
The $12 nylon holster with extra mag pouch from Tommydsports.com fits fine on my CZ 83 as well as many of my other guns. Has a metal belt clip as well as a sewed on belt slip through option, with adjustable velcro gun holder straps. I love it. The model I bought was Hip Holster 308-Model A-Black.
-
I like the nylon ones on ebay for around $10.
Generally speaking, the CZ 82 and 83 should be identical in fit for any holster. The only one I know of specifically is the High Noon line, http://highnoonholsters.com/index.html, (http://highnoonholsters.com/index.html,) plus the Uncle Mikes nylon generics http://www.uncle-mikes.com/um_cat_holsters.html, (http://www.uncle-mikes.com/um_cat_holsters.html,) the size 1 should work.
-
Hello to one and all, I just registered and this is my first post.
In the FWIW category, I bought a a Bullseye holster kit from a local to me Tandy Leather store for IIRC, $22 out the door. I changed the angle of the belt clip slightly to give a more forward cant of the grip and then I wet formed it to my CZ82. It's been nice enough that I used another kit to wet form for a Star BM.
The Tandy sight lists the same kit for a slightly higher price however, it was about 5 1/2, 6 years ago respectively that I made my holsters and perhaps being a local purchase instead of the web there was a price difference.
Tandy: https://www.tandyleather.com/en/product/bullseye-concealed-semi-automatic-holster-kit-medium-large (https://www.tandyleather.com/en/product/bullseye-concealed-semi-automatic-holster-kit-medium-large)
Goodwill,
Crackerjim
-
Here's another option...Bianchi 19L for a Sig Sauer P230.
After trimming about 1/8-1/4" leather with an exacto knife (the part of the holster that touches the front of the trigger guard), IT FITS LIKE A GLOVE on my round trigger guard 82 and 83. Also fits my Bulgarian PM perfectly.
-
I have a couple of holsters from this company, and been happy with them. They list the CZ 83 is on their "gun list".
One of the URL's is to their home page. The second is to a cross draw holster they make and shows an 83 blank with the the square trigger guard as an example.
https://www.bullardleather.com/
https://store.bullardleather.com/catalog/product/82b3004b369a4cd18d2e8b8c0ab2ee28
-
check out ebay-$15 Tommy D Sports or Bull Dog
-
I put the CZ-82/83 on the wish list at Alien Gear http://aliengearholsters.com/ and We the People https://wethepeopleholsters.com
-
This one showed up today in my mail. Fits perfect. Good price.
https://www.etsy.com/listing/563204948/cz-82-83-genuine-leather-belt-owb-gun?ref=shop_home_active_22&pro=1&frs=1
-
Hiya and thx whomever started the thread. lots of nice choices seen in the thread ,and the curved vs squared trigger guard needs to be considered. Kydex,leather,quality custom breathable won't turn your shirt black leather,nylon, etc. Looking to spend 5 bucks or 205 bucks? Its all out there.
If ya don't care for IWB, a HBE switch pancake works. Greg Kramer's IWB #3 fits proper,especially with round trigger guard. Marrow.com has a Falco that works ok.As does FIST convertible. I kinda liked the fanny pack/man purse made to quick access it at waist level and being a good back up choice. Cheers. Be well.
-
I just received a surplus Czech police holster meant for the 82. I really like how it drops the gun below the belt line. It is especially good for OC on my motorcycle.
Sent from my iPad using Tapatalk
-
I just received a surplus Czech police holster meant for the 82. I really like how it drops the gun below the belt line. It is especially good for OC on my motorcycle.
Sent from my iPad using Tapatalk
Do you carry cocked and locked, if so, does the safety strap work with the hammer back?
-
I just received a surplus Czech police holster meant for the 82. I really like how it drops the gun below the belt line. It is especially good for OC on my motorcycle.
Sent from my iPad using Tapatalk
Do you carry cocked and locked, if so, does the safety strap work with the hammer back?
I do not carry this one cocked and locked. This holster would be quite awkward to carry it that way. I cannot recommend it for Condition 1 carry. I can recommend it for an awesome looking OC. Nice old leather smell too.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190801/b91dd3cde559b7d6659da719117b8048.jpg)
(https://uploads.tapatalk-cdn.com/20190801/f9e67fbb3e536d8f8cb716a7704a23b3.jpg)
(https://uploads.tapatalk-cdn.com/20190801/8bbfcc04e475713af2356bcbe243b085.jpg)
Sent from my iPhone using Tapatalk
-
I also bought one a little while ago, and that's exactly how I carry.
-
Do you carry cocked and locked, if so, does the safety strap work with the hammer back?
I do not carry this one cocked and locked. This holster would be quite awkward to carry it that way. I cannot recommend it for Condition 1 carry. I can recommend it for an awesome looking OC.
By "awkward" I infer you believe it's possible. If possible can you show a photo of the pistol holstered that way? What makes it awkward?
-
Possible yes, the strap gets in the way of the draw. I’ll take a pic later when home. Didn’t take the bike today so don’t have this one on.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190810/04afbdbf2030768ed9ed5523759de883.jpg)(https://uploads.tapatalk-cdn.com/20190810/0395d3efbfc8c42404176be841694af3.jpg)
Pics cocked and locked as requested. Just doesn’t sit right, but certainly doable. I tried the draw, and it really wasn’t bad. I still don’t think this is the holster for that, but it could be modified to be so. Sorry about the delay, my wife met me with a drink when I got home yesterday, and I don’t handle the guns while drinking as a rule.
Sent from my iPad using Tapatalk
-
It looks like you could slide the retention strap forward a little to clear the hammer. I agree, it does look "awkward."
-
(https://uploads.tapatalk-cdn.com/20190810/04afbdbf2030768ed9ed5523759de883.jpg)(https://uploads.tapatalk-cdn.com/20190810/0395d3efbfc8c42404176be841694af3.jpg)
Pics cocked and locked as requested. Just doesn’t sit right, but certainly doable. I tried the draw, and it really wasn’t bad. I still don’t think this is the holster for that, but it could be modified to be so. Sorry about the delay, my wife met me with a drink when I got home yesterday, and I don’t handle the guns while drinking as a rule.
Sent from my iPad using Tapatalk
Thanks for the pics. I've been looking for a leather holster with thumb break -- I don't want to end up like the dancing FBI agent from a year ago (not that I dance or am an FBI agent). The CZ 82 is not drop safe so the retention strap makes sense. Your rig seems like the closest match to my goals. I guess I should just go out and buy the holster and figure out if the awkwardness you note is worth the hassle.
-
Sent from my iPad using Tapatalk
[/quote]
Thanks for the pics. I've been looking for a leather holster with thumb break -- I don't want to end up like the dancing FBI agent from a year ago (not that I dance or am an FBI agent). The CZ 82 is not drop safe so the retention strap makes sense. Your rig seems like the closest match to my goals. I guess I should just go out and buy the holster and figure out if the awkwardness you note is worth the hassle.
[/quote]
You know the 82 has been described here as having the best DA trigger by a lot of people. I’m happy carrying DA/SA.
I don’t like the retention cocked and locked. It wants the trigger down to keep the gun from moving around in the holster. But I carry riding, so I’m pickier.
Sent from my iPhone using Tapatalk
-
I just bought a Medan convertible holster, it can be worn IWB or OWB. This photo shows the belt loop for OWB that is on one side of the holster.
(https://i.imgur.com/dC7b96g.jpg)
This photo from the other side shows a removable leather strap with belt hook for IWB.
(https://i.imgur.com/KxfG0n6.jpg)
Medan is a Ukrainian company that originally made these for Makarovs but it fits my 82 nicely. I got it for $25 through Amazon.
-
Evike has the Swiss Arms ADAPTX Universal Holster by Cybergun on sale. Claimed fit for CZ-82/83. $29.
https://www.evike.com/products/83550/
I have one for my TT-33. The fit is perfect.
-
I was originally looking for a leather full flap field holster for a CZ83. Most choices were surplus LE or military. Many were not specifically made for CZ83. This was my end result purchase.
https://www.barsonyholsters.com/new-ambidextrous-tan-leather-pancake-holster-for-compact-sub-compact-9mm-40-45-pistols-34st/
While not my original focus, this holster had a significant feature over all others. It was ambidextrous. We are lefty and righty users. Only a single item purchase - $$ savings.
We have a total of [3] magazines, so the below was a logical add-on.
https://www.barsonyholsters.com/new-saddle-tan-leather-double-magazine-pouch-stmag2/
I felt the only shortcoming with both items was the backside of the male metal snap posts could possibly rub on the pistol or magazines. The glitch was resolved with an “un-lost” glove. I cut some circular patches out, and glued them over the snap backings.
FYI: About a month after receiving the holster, Barsony came out with a full flap field holster product line – non-leather.
-
I was originally looking for a leather full flap field holster for a CZ83. Most choices were surplus LE or military. Many were not specifically made for CZ83. This was my end result purchase.
https://www.barsonyholsters.com/new-ambidextrous-tan-leather-pancake-holster-for-compact-sub-compact-9mm-40-45-pistols-34st/
While not my original focus, this holster had a significant feature over all others. It was ambidextrous. We are lefty and righty users. Only a single item purchase - $$ savings.
We have a total of [3] magazines, so the below was a logical add-on.
https://www.barsonyholsters.com/new-saddle-tan-leather-double-magazine-pouch-stmag2/
I felt the only shortcoming with both items was the backside of the male metal snap posts could possibly rub on the pistol or magazines. The glitch was resolved with an “un-lost” glove. I cut some circular patches out, and glued them over the snap backings.
FYI: About a month after receiving the holster, Barsony came out with a full flap field holster product line – non-leather.
I like that the retention strap is adjustable for hammer down or cocked and locked.
-
I recommend Vedder. Here is a link for their CZ-82 list
https://www.vedderholsters.com/search.php?search_query=cz-82 (https://www.vedderholsters.com/search.php?search_query=cz-82)
-
I had DM Bullard in in Texas make one for me for around $150 and it works great. Just as a word of caution, I had them make 4 holster for me. 2 work great, one not so good and one did not work at all, that is for my SIG M11 A1, when the holster is put on a belt one cannot get the pistol far enough into the holster to cover the trigger.
-
https://imgur.com/L0ZnrPw
https://imgur.com/mNlYHfH
Hi All, Here is the Zili Praha holster. I was lucky enough to happen by it on ebay. It was listed as NOS, so I don't know if they're made anymore. It is very heavy-duty. One thing to note that there is a large steel button opposite the screw seen here. You can avoid contact with the pistol if you're careful, but I will most likely cover it with something non-scratching.
-
This is a "Top Five" article on CZ 82/83 holsters that I came across today. Enjoy!
Our Review of the Best Concealed Carry CZ 82 Holster [2020]
https://gunnewsdaily.com/reviews/cz-82-holster/
-
Try Azula Holsters, out of South Africa, they list holsters for 82 and 83's, ordered one from amazon for my Beretta 81BB and it fits real well. will try one for my Cz 82 ,and 50.
-
I like the standard nylon OWB holsters with an extra magazine pouch that can be found on ebay. Like the Bulldog brand etc.
-
I just ordered another Gun Glove "butt forward" IWB holster from Allen on ebay. Had one for my last 82 and 83, and found it was the best way to carry it.
https://www.ebay.com/itm/360470101070