The Original CZ Forum
GENERAL => The Classifieds: Buy/Sell/Trade (25 posts required to post a listing!) => CZF Vendors Storefront => Topic started by: enaz40 on September 08, 2011, 07:04:39 PM
-
I am now offering hex (allen) head grip screws in stainless steel and brass that fit most CZ pistols. A few sellers- not many- offer grip screws to fit the 90% of CZ pistols that are the same 8mm length. But as far as I know I am the only seller in the U.S. -maybe the world- besides CZ-USA to offer grip screws to fit the Rami and 40B. And CZ-USA has only slotted or Phillips heads. I have Rami/ 40B screws in both stainless and brass hex head, and when you include shipping costs they're actually less than what CZ charges for slotted screws . I also have torx screws in stainless steel as well as stainless slotted screws. My website is http://czscrews.angelfire.com (http://czscrews.angelfire.com). The site is a work in progress; I'm a gun guy not a computer nerd, but I hope you'll check it out, pictures of all my screws are there. You can order from the website, or just PM me.
Update- I do have black torx screws now for both standard CZ pistols and CZ Rami/40B. I have them on my website and Ebay but please use my website. I charge less there because I don't pay the Ebay fees, plus I just hate Ebay/ Paypal because they're anti-gun. I'm trying to find an Ebay alternative but they seem to be the giant monopoly that everyone goes to when they're looking for anything.
-
good stuff, do you plan on offering screws for any other models? I need some for an 82.
-
The standard screws fit all CZ pistols except Rami, 40B, and Dan Wesson (as far as I know). If they don't fit it's money back including shipping.
-
I'm not sure your web site is working. It did not seem to send my message to you.
My email address is: B_HARRISON@FRONTIER.COM
PHONE: 928-768-5456.
I am trying to order a set of black screws for a CZ75-B and for a CZ Rami.
If you will send me a bill w/name and address I'll send a check back by return mail.
Thanks,
Mitch
-
I know, my website is no Amazon. I could use a webmaster ???. Best bet is to email or PM me.
-
email sent.
-
do different grips require different screw lenghts? if so do you have to cut and rethread them? i thought about ordering custom grips but don't know how big a pain to get or make correct length screws?
-
Most grip makers make their grips to match the factory ones. In any event, most CZ's have grip screws that go into an open area inside the frame, so the length can be off slightly without affecting anything. The Rami is the exception to this rule because the grip screws are very close to the magazine, and if they are too long by even the slightest amount they will rub against the magazine and cause problems.
-
Just added some stainless torx screws to my web site, they're pretty nice if I do say so myself. I have them in standard CZ size only- sorry, no Rami sizes on this one. You can see the pictures at my website - http://czscrews.angelfire.com/#photo1746483 (http://czscrews.angelfire.com/#photo1746483) . They're also on Ebay, but at a dollar more per set to cover the Ebay fees.
-
I recently ordered several sets here and want to praise enaz40 for his excellent products, service and price. Hopefully, I will be adding more CZ pistols to the collection and will be needing more grip screws in the future. Thanks!
-
Thanks, appreciate that.
-
I recently ordered several sets here and want to praise enaz40 for his excellent products, service and price. Hopefully, I will be adding more CZ pistols to the collection and will be needing more grip screws in the future. Thanks!
Copy that
The sets I received are too nice
And they fit better than others offered
My two CZ 75s and Witness with his Torx Screws
(http://i1108.photobucket.com/albums/h414/denstinettm14/TheTrio-1.jpg)
(http://i1108.photobucket.com/albums/h414/denstinettm14/TorxScrews.jpg)
-
Is the OP still in business?
-
Yep I'm still here. Slowed down a bit no doubt, but still kicking.
-
My SP-01 with the Stainless Alan head screws from. http://czscrews.angelfire.com
I have also tryed the brass and black Alan heads, they all work well.
(http://i.imgur.com/9YB3GBA.jpg)
-
Yep I'm still here. Slowed down a bit no doubt, but still kicking.
Awesome, I didn't know the anglefire sites still worked.
I am afraid of the allen key style screws because I have a tendency to strip them now and again and they end up getting stuck.
-
Still selling these? I?m not able to follow the link.
Sent from my iPhone using Tapatalk
-
As far as I know, they are still in business
I have them on my CZs
Very nice Screws
-
Still selling these? I?m not able to follow the link.
Yeah I'm still here. Just checked my link, it still works. Or you can just DM me.
http://czscrews.angelfire.com/#photo1746483 (http://czscrews.angelfire.com/#photo1746483)
-
I just got some black torx screws, in sizes to fit standard CZ pistols and Rami. They're pretty nice if I do say so myself. Pics are on my website. Angelfire has some issues, sometimes just doesn't connect, you have to keep trying. ;D http://czscrews.angelfire.com/#photo1746483 (http://czscrews.angelfire.com/#photo1746483)