The Original CZ Forum

CZ PISTOL CLUBS => Curio and Relic CZs => CZ100 SERIES CLUB => Topic started by: manny100 on November 18, 2002, 09:46:41 PM

Title: Lubrication Points
Post by: manny100 on November 18, 2002, 09:46:41 PM

Just picked up my CZ100 9mm. The manual that was provided doesn't go into detail about oiling the gun except for the barrel. Since the slide rails contact only  polymer from the frame, do the grooves need oil? Also, do any parts within the frame need oiling? Any feedback is appreciated.

Title: Lubrication Points
Post by: ndeeya on November 19, 2002, 04:33:34 PM

manny,

its good practice to lube up the rails to get a silky recoil.

also lube the trigger bar (part #32) where it meets the disconnector (part #42) and interrupter (part #39).

i like to lube the "recoil spring guide rod" since it is polymer rubbing against a steel slide.

remember a little lube goes a long way so don't over do it.

cheers,
-andy

Title: Lubrication Points
Post by: manny100 on November 19, 2002, 07:44:38 PM

Thanks for the tips Andy. It's much appreciated.

Title: Lubrication Points
Post by: ndeeya on November 20, 2002, 02:40:07 AM

no prob.

-andy