The Original CZ Forum

CZ PISTOL CLUBS => Compact CZ 75s => Topic started by: feed-the-monkey on February 25, 2002, 10:45:13 AM

Title: Convert PCR to C&L?
Post by: feed-the-monkey on February 25, 2002, 10:45:13 AM

So does anyone that has a regular CZ75b(or compact) and a PCR tell if the internals of the 75 could be dropped in to convert the PCR to have a safety rather than the decocker? IS the frame the exact same dimensions where the ejector block sits?

Title: Convert PCR to C&L?
Post by: CZ75ID on February 25, 2002, 09:21:26 PM

This has been asked before..i think with the BD full size..wish the search feature worked.

go back a few weks in posts././you might find it..

Title: Convert PCR to C&L?
Post by: CZ75ID on February 26, 2002, 09:41:09 AM

YES!! i jsut spoke to MIKE..he says it has been done before.

also SA TRIGGERS and parts are in stock for our Guns! ALL CZ Models
except the CZ100.

Title: Convert PCR to C&L?
Post by: contender4040 on March 02, 2002, 03:43:00 PM

This would be the LW commander of cz's------does mike himself do this conversion when you talked with him?

Title: Convert PCR to C&L?
Post by: SteveYC on March 02, 2002, 03:56:52 PM

   See my message under "SA Parts" subject.

Title: Convert PCR to C&L?
Post by: CZ75ID on March 02, 2002, 11:18:04 PM

Your reading my mind!

The SA  PCR would be halfway to a CZ75SA's accuracy.. as the 75SA features the
PCR's hammer

MIKE has done the C&L conversions, just to prove it could be done. hes the Only
CZ Armourer in America. No wonder he is so busy.

Wth his action job andthe conversion,the cocked 'n locked PCR would be super slick!

Title: Convert PCR to C&L?
Post by: feed-the-monkey on March 11, 2002, 12:46:33 PM

I'm not saying that I wanted SA only, just the c&l ability. I'd actually like to keep the DA pull. Just get rid of the decocker.  The big question to me is, can I put compact parts (safety, ejector housing, sear) in the PCR to convert from a decocker to a safety version like the compact. I guess the best thing to do is call Mike.

Title: Convert PCR to C&L?
Post by: feed-the-monkey on March 29, 2002, 01:21:18 PM

I finally got a chance to take apart a decocker version. Yes, the hole is in the exact same spot as the safety's is. The ONLY thing that looks like would need to be done, is to machine out the section of the frame where the small saftey keeper is (best term I could come up with). Bascially the small spring and piece that keeps the safety either on or off. That cut was not made in the frame.

BTW, where do people get the idea that a SA gun is more accurate than a DA/SA gun?  There is NOTHING different about the guns accuracy, only the trigger pull the SHOOTER feels. That is a training issue, not a gun issue. And, the SA pull that developed after about 4000 rounds through my CZ is good enough for ANY defensive shooting situation. It may not be a bullseye type trigger, but it is more than useable for combat.