The Original CZ Forum

ARCHIVES => CZF ARCHIVES II => Hakan's Corner => Topic started by: house2 on January 02, 2013, 05:10:20 PM

Title: HAKAN PEK - CZ 75 B High Polish
Post by: house2 on January 02, 2013, 05:10:20 PM

Received my custom Hakan's in Two Tone Amboyna. The pictures do not do them justice!
Thank-You Mr. Pek.

(https://lh4.googleusercontent.com/-KAx-htWCH64/UOSu7gydKAI/AAAAAAAAAFE/Q43sC_7-BKM/s1280/20130102_154920.JPG)
(https://lh6.googleusercontent.com/-YHHqCVuKRhY/UOSu9aSEEyI/AAAAAAAAAFM/J5oQFu5TPNU/s800/20130102_155112.JPG)
(https://lh5.googleusercontent.com/-u7OG07OaeGM/UOSvGZ07cxI/AAAAAAAAAFU/D6vCa2Pr4oA/s800/20130102_154222.JPG)

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: Striper Sniper on January 05, 2013, 08:38:39 PM

Absolutely beautiful! Now you just have to get some stainless screws or stainless torc screws.

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: Birds Away on January 06, 2013, 07:03:59 AM

Absolutely beautiful.  I am very jealous.  But I'm glad I don't own it.  It is too pretty to shoot, lol.

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: house2 on January 06, 2013, 12:22:55 PM

Agreed on both fronts guys. I'm going to contact enaz40 soon for a set of stainless torx screws.

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: Llamafood on February 07, 2013, 04:40:07 PM

I think CGW sells stainless screws on the cheap. beautiful gun bro.  looks amazing.

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: house2 on February 11, 2013, 04:23:47 PM

Thanks Llamafood.

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: elbiciclista on June 17, 2013, 07:36:55 PM

house2,
Would you mind revealing how you polished the stainless finish? What did you use?
From my perspective, that is perfect, absolutely gorgeous.   :)
You have polished just enough for my taste, but not too much.

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: house2 on June 28, 2013, 11:08:33 PM

Quote from: elbiciclista on June 17, 2013, 07:36:55 PM

house2,
Would you mind revealing how you polished the stainless finish? What did you use?
From my perspective, that is perfect, absolutely gorgeous.   :)
You have polished just enough for my taste, but not too much.

Hey E sorry I haven't logged in for a bit and just saw your message. You know what, I've actually not used any product to polish this pistol. I just used a dry microfibre cloth to get out the smudges. Also, not that I think it made a difference on the finish, these shots were taken after Froglubin this bad boy up. Once it dried I used that microfibre cloth to get rid of the waxiness the FL leaves behind.

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: 1SOW on July 17, 2013, 12:15:28 AM

house2, wow those stainless mag bases just cap off a stunning 75B.

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: Mastodon on July 18, 2013, 11:29:44 PM

gawd, that is gorgeous!  8)

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: bozwell on July 18, 2013, 11:34:53 PM

You did well sir.  You did very well. :)

Title: Re: HAKAN PEK - CZ 75 B High Polish
Post by: house2 on July 22, 2013, 11:38:46 AM

Thanks guys, Hakan's grips and 75plus' base plates really help to set off an already gorgeous pistol. I don't know if I will yet, but I'm contemplating switching over to the CGW hard chromed race hammer as well. I still haven't gotten around to changing over to stainless grip screws either but I will. For now I justify them by telling myself the black matches the sights, lol! Thanks again for the kind remarks.